state the hypothesis for the test

Teach yourself statistics

What is Hypothesis Testing?

A statistical hypothesis is an assumption about a population parameter . This assumption may or may not be true. Hypothesis testing refers to the formal procedures used by statisticians to accept or reject statistical hypotheses.

Statistical Hypotheses

The best way to determine whether a statistical hypothesis is true would be to examine the entire population. Since that is often impractical, researchers typically examine a random sample from the population. If sample data are not consistent with the statistical hypothesis, the hypothesis is rejected.

There are two types of statistical hypotheses.

Null hypothesis . The null hypothesis, denoted by H o , is usually the hypothesis that sample observations result purely from chance.
Alternative hypothesis . The alternative hypothesis, denoted by H 1 or H a , is the hypothesis that sample observations are influenced by some non-random cause.

For example, suppose we wanted to determine whether a coin was fair and balanced. A null hypothesis might be that half the flips would result in Heads and half, in Tails. The alternative hypothesis might be that the number of Heads and Tails would be very different. Symbolically, these hypotheses would be expressed as

H o : P = 0.5 H a : P ≠ 0.5

Suppose we flipped the coin 50 times, resulting in 40 Heads and 10 Tails. Given this result, we would be inclined to reject the null hypothesis. We would conclude, based on the evidence, that the coin was probably not fair and balanced.

Can We Accept the Null Hypothesis?

Some researchers say that a hypothesis test can have one of two outcomes: you accept the null hypothesis or you reject the null hypothesis. Many statisticians, however, take issue with the notion of "accepting the null hypothesis." Instead, they say: you reject the null hypothesis or you fail to reject the null hypothesis.

Why the distinction between "acceptance" and "failure to reject?" Acceptance implies that the null hypothesis is true. Failure to reject implies that the data are not sufficiently persuasive for us to prefer the alternative hypothesis over the null hypothesis.

Hypothesis Tests

Statisticians follow a formal process to determine whether to reject a null hypothesis, based on sample data. This process, called hypothesis testing , consists of four steps.

State the hypotheses. This involves stating the null and alternative hypotheses. The hypotheses are stated in such a way that they are mutually exclusive. That is, if one is true, the other must be false.
Formulate an analysis plan. The analysis plan describes how to use sample data to evaluate the null hypothesis. The evaluation often focuses around a single test statistic.
Analyze sample data. Find the value of the test statistic (mean score, proportion, t statistic, z-score, etc.) described in the analysis plan.
Interpret results. Apply the decision rule described in the analysis plan. If the value of the test statistic is unlikely, based on the null hypothesis, reject the null hypothesis.

Decision Errors

Two types of errors can result from a hypothesis test.

Type I error . A Type I error occurs when the researcher rejects a null hypothesis when it is true. The probability of committing a Type I error is called the significance level . This probability is also called alpha , and is often denoted by α.
Type II error . A Type II error occurs when the researcher fails to reject a null hypothesis that is false. The probability of committing a Type II error is called Beta , and is often denoted by β. The probability of not committing a Type II error is called the Power of the test.

Decision Rules

The analysis plan for a hypothesis test must include decision rules for rejecting the null hypothesis. In practice, statisticians describe these decision rules in two ways - with reference to a P-value or with reference to a region of acceptance.

P-value. The strength of evidence in support of a null hypothesis is measured by the P-value . Suppose the test statistic is equal to S . The P-value is the probability of observing a test statistic as extreme as S , assuming the null hypothesis is true. If the P-value is less than the significance level, we reject the null hypothesis.

The set of values outside the region of acceptance is called the region of rejection . If the test statistic falls within the region of rejection, the null hypothesis is rejected. In such cases, we say that the hypothesis has been rejected at the α level of significance.

These approaches are equivalent. Some statistics texts use the P-value approach; others use the region of acceptance approach.

One-Tailed and Two-Tailed Tests

A test of a statistical hypothesis, where the region of rejection is on only one side of the sampling distribution , is called a one-tailed test . For example, suppose the null hypothesis states that the mean is less than or equal to 10. The alternative hypothesis would be that the mean is greater than 10. The region of rejection would consist of a range of numbers located on the right side of sampling distribution; that is, a set of numbers greater than 10.

A test of a statistical hypothesis, where the region of rejection is on both sides of the sampling distribution, is called a two-tailed test . For example, suppose the null hypothesis states that the mean is equal to 10. The alternative hypothesis would be that the mean is less than 10 or greater than 10. The region of rejection would consist of a range of numbers located on both sides of sampling distribution; that is, the region of rejection would consist partly of numbers that were less than 10 and partly of numbers that were greater than 10.

school Campus Bookshelves
menu_book Bookshelves
perm_media Learning Objects
login Login
how_to_reg Request Instructor Account
hub Instructor Commons
Download Page (PDF)
Download Full Book (PDF)
Periodic Table
Physics Constants
Scientific Calculator
Reference & Cite
Tools expand_more
Readability

selected template will load here

This action is not available.

8.1: The Elements of Hypothesis Testing

Last updated
Save as PDF
Page ID 130263

Learning Objectives

To understand the logical framework of tests of hypotheses.
To learn basic terminology connected with hypothesis testing.
To learn fundamental facts about hypothesis testing.

Types of Hypotheses

A hypothesis about the value of a population parameter is an assertion about its value. As in the introductory example we will be concerned with testing the truth of two competing hypotheses, only one of which can be true.

Definition: null hypothesis and alternative hypothesis

The null hypothesis , denoted $H_0$, is the statement about the population parameter that is assumed to be true unless there is convincing evidence to the contrary.
The alternative hypothesis , denoted $H_a$, is a statement about the population parameter that is contradictory to the null hypothesis, and is accepted as true only if there is convincing evidence in favor of it.

Definition: statistical procedure

Hypothesis testing is a statistical procedure in which a choice is made between a null hypothesis and an alternative hypothesis based on information in a sample.

The end result of a hypotheses testing procedure is a choice of one of the following two possible conclusions:

Reject $H_0$ (and therefore accept $H_a$), or
Fail to reject $H_0$ (and therefore fail to accept $H_a$).

The null hypothesis typically represents the status quo, or what has historically been true. In the example of the respirators, we would believe the claim of the manufacturer unless there is reason not to do so, so the null hypotheses is $H_0:\mu =75$. The alternative hypothesis in the example is the contradictory statement $H_a:\mu <75$. The null hypothesis will always be an assertion containing an equals sign, but depending on the situation the alternative hypothesis can have any one of three forms: with the symbol $<$, as in the example just discussed, with the symbol $>$, or with the symbol $\neq$. The following two examples illustrate the latter two cases.

Example $\PageIndex{1}$

A publisher of college textbooks claims that the average price of all hardbound college textbooks is $\$127.50$. A student group believes that the actual mean is higher and wishes to test their belief. State the relevant null and alternative hypotheses.

The default option is to accept the publisher’s claim unless there is compelling evidence to the contrary. Thus the null hypothesis is $H_0:\mu =127.50$. Since the student group thinks that the average textbook price is greater than the publisher’s figure, the alternative hypothesis in this situation is $H_a:\mu >127.50$.

Example $\PageIndex{2}$

The recipe for a bakery item is designed to result in a product that contains $8$ grams of fat per serving. The quality control department samples the product periodically to insure that the production process is working as designed. State the relevant null and alternative hypotheses.

The default option is to assume that the product contains the amount of fat it was formulated to contain unless there is compelling evidence to the contrary. Thus the null hypothesis is $H_0:\mu =8.0$. Since to contain either more fat than desired or to contain less fat than desired are both an indication of a faulty production process, the alternative hypothesis in this situation is that the mean is different from $8.0$, so $H_a:\mu \neq 8.0$.

In Example $\PageIndex{1}$, the textbook example, it might seem more natural that the publisher’s claim be that the average price is at most $\$127.50$, not exactly $\$127.50$. If the claim were made this way, then the null hypothesis would be $H_0:\mu \leq 127.50$, and the value $\$127.50$ given in the example would be the one that is least favorable to the publisher’s claim, the null hypothesis. It is always true that if the null hypothesis is retained for its least favorable value, then it is retained for every other value.

Thus in order to make the null and alternative hypotheses easy for the student to distinguish, in every example and problem in this text we will always present one of the two competing claims about the value of a parameter with an equality. The claim expressed with an equality is the null hypothesis. This is the same as always stating the null hypothesis in the least favorable light. So in the introductory example about the respirators, we stated the manufacturer’s claim as “the average is $75$ minutes” instead of the perhaps more natural “the average is at least $75$ minutes,” essentially reducing the presentation of the null hypothesis to its worst case.

The first step in hypothesis testing is to identify the null and alternative hypotheses.

The Logic of Hypothesis Testing

Although we will study hypothesis testing in situations other than for a single population mean (for example, for a population proportion instead of a mean or in comparing the means of two different populations), in this section the discussion will always be given in terms of a single population mean $\mu$.

The null hypothesis always has the form $H_0:\mu =\mu _0$ for a specific number $\mu _0$ (in the respirator example $\mu _0=75$, in the textbook example $\mu _0=127.50$, and in the baked goods example $\mu _0=8.0$). Since the null hypothesis is accepted unless there is strong evidence to the contrary, the test procedure is based on the initial assumption that $H_0$ is true. This point is so important that we will repeat it in a display:

The test procedure is based on the initial assumption that $H_0$ is true.

The criterion for judging between $H_0$ and $H_a$ based on the sample data is: if the value of $\overline{X}$ would be highly unlikely to occur if $H_0$ were true, but favors the truth of $H_a$, then we reject $H_0$ in favor of $H_a$. Otherwise we do not reject $H_0$.

Supposing for now that $\overline{X}$ follows a normal distribution, when the null hypothesis is true the density function for the sample mean $\overline{X}$ must be as in Figure $\PageIndex{1}$: a bell curve centered at $\mu _0$. Thus if $H_0$ is true then $\overline{X}$ is likely to take a value near $\mu _0$ and is unlikely to take values far away. Our decision procedure therefore reduces simply to:

if $H_a$ has the form $H_a:\mu <\mu _0$ then reject $H_0$ if $\bar{x}$ is far to the left of $\mu _0$;
if $H_a$ has the form $H_a:\mu >\mu _0$ then reject $H_0$ if $\bar{x}$ is far to the right of $\mu _0$;
if $H_a$ has the form $H_a:\mu \neq \mu _0$ then reject $H_0$ if $\bar{x}$ is far away from $\mu _0$ in either direction.

Think of the respirator example, for which the null hypothesis is $H_0:\mu =75$, the claim that the average time air is delivered for all respirators is $75$ minutes. If the sample mean is $75$ or greater then we certainly would not reject $H_0$ (since there is no issue with an emergency respirator delivering air even longer than claimed).

If the sample mean is slightly less than $75$ then we would logically attribute the difference to sampling error and also not reject $H_0$ either.

Values of the sample mean that are smaller and smaller are less and less likely to come from a population for which the population mean is $75$. Thus if the sample mean is far less than $75$, say around $60$ minutes or less, then we would certainly reject $H_0$, because we know that it is highly unlikely that the average of a sample would be so low if the population mean were $75$. This is the rare event criterion for rejection: what we actually observed $(\overline{X}<60)$ would be so rare an event if $\mu =75$ were true that we regard it as much more likely that the alternative hypothesis $\mu <75$ holds.

In summary, to decide between $H_0$ and $H_a$ in this example we would select a “rejection region” of values sufficiently far to the left of $75$, based on the rare event criterion, and reject $H_0$ if the sample mean $\overline{X}$ lies in the rejection region, but not reject $H_0$ if it does not.

The Rejection Region

Each different form of the alternative hypothesis Ha has its own kind of rejection region:

if (as in the respirator example) $H_a$ has the form $H_a:\mu <\mu _0$, we reject $H_0$ if $\bar{x}$ is far to the left of $\mu _0$, that is, to the left of some number $C$, so the rejection region has the form of an interval $(-\infty ,C]$;
if (as in the textbook example) $H_a$ has the form $H_a:\mu >\mu _0$, we reject $H_0$ if $\bar{x}$ is far to the right of $\mu _0$, that is, to the right of some number $C$, so the rejection region has the form of an interval $[C,\infty )$;
if (as in the baked good example) $H_a$ has the form $H_a:\mu \neq \mu _0$, we reject $H_0$ if $\bar{x}$ is far away from $\mu _0$ in either direction, that is, either to the left of some number $C$ or to the right of some other number $C′$, so the rejection region has the form of the union of two intervals $(-\infty ,C]\cup [C',\infty )$.

The key issue in our line of reasoning is the question of how to determine the number $C$ or numbers $C$ and $C′$, called the critical value or critical values of the statistic, that determine the rejection region.

Definition: critical values

The critical value or critical values of a test of hypotheses are the number or numbers that determine the rejection region.

Suppose the rejection region is a single interval, so we need to select a single number $C$. Here is the procedure for doing so. We select a small probability, denoted $\alpha$, say $1\%$, which we take as our definition of “rare event:” an event is “rare” if its probability of occurrence is less than $\alpha$. (In all the examples and problems in this text the value of $\alpha$ will be given already.) The probability that $\overline{X}$ takes a value in an interval is the area under its density curve and above that interval, so as shown in Figure $\PageIndex{2}$ (drawn under the assumption that $H_0$ is true, so that the curve centers at $\mu _0$) the critical value $C$ is the value of $\overline{X}$ that cuts off a tail area $\alpha$ in the probability density curve of $\overline{X}$. When the rejection region is in two pieces, that is, composed of two intervals, the total area above both of them must be $\alpha$, so the area above each one is $\alpha /2$, as also shown in Figure $\PageIndex{2}$.

The number $\alpha$ is the total area of a tail or a pair of tails.

Example $\PageIndex{3}$

In the context of Example $\PageIndex{2}$, suppose that it is known that the population is normally distributed with standard deviation $\alpha =0.15$ gram, and suppose that the test of hypotheses $H_0:\mu =8.0$ versus $H_a:\mu \neq 8.0$ will be performed with a sample of size $5$. Construct the rejection region for the test for the choice $\alpha =0.10$. Explain the decision procedure and interpret it.

If $H_0$ is true then the sample mean $\overline{X}$ is normally distributed with mean and standard deviation

\[\begin{align} \mu _{\overline{X}} &=\mu \nonumber \\[5pt] &=8.0 \nonumber \end{align} \nonumber \]

\[\begin{align} \sigma _{\overline{X}}&=\dfrac{\sigma}{\sqrt{n}} \nonumber \\[5pt] &= \dfrac{0.15}{\sqrt{5}} \nonumber\\[5pt] &=0.067 \nonumber \end{align} \nonumber \]

Since $H_a$ contains the $\neq$ symbol the rejection region will be in two pieces, each one corresponding to a tail of area $\alpha /2=0.10/2=0.05$. From Figure 7.1.6, $z_{0.05}=1.645$, so $C$ and $C′$ are $1.645$ standard deviations of $\overline{X}$ to the right and left of its mean $8.0$:

\[C=8.0-(1.645)(0.067) = 7.89 \; \; \text{and}\; \; C'=8.0 + (1.645)(0.067) = 8.11 \nonumber \]

The result is shown in Figure $\PageIndex{3}$. α = 0.1

The decision procedure is: take a sample of size $5$ and compute the sample mean $\bar{x}$. If $\bar{x}$ is either $7.89$ grams or less or $8.11$ grams or more then reject the hypothesis that the average amount of fat in all servings of the product is $8.0$ grams in favor of the alternative that it is different from $8.0$ grams. Otherwise do not reject the hypothesis that the average amount is $8.0$ grams.

The reasoning is that if the true average amount of fat per serving were $8.0$ grams then there would be less than a $10\%$ chance that a sample of size $5$ would produce a mean of either $7.89$ grams or less or $8.11$ grams or more. Hence if that happened it would be more likely that the value $8.0$ is incorrect (always assuming that the population standard deviation is $0.15$ gram).

Because the rejection regions are computed based on areas in tails of distributions, as shown in Figure $\PageIndex{2}$, hypothesis tests are classified according to the form of the alternative hypothesis in the following way.

Definitions: Test classifications

If $H_a$ has the form $\mu \neq \mu _0$ the test is called a two-tailed test .
If $H_a$ has the form $\mu < \mu _0$ the test is called a left-tailed test .
If $H_a$ has the form $\mu > \mu _0$the test is called a right-tailed test .

Each of the last two forms is also called a one-tailed test .

Two Types of Errors

The format of the testing procedure in general terms is to take a sample and use the information it contains to come to a decision about the two hypotheses. As stated before our decision will always be either

reject the null hypothesis $H_0$ in favor of the alternative $H_a$ presented, or
do not reject the null hypothesis $H_0$ in favor of the alternative $H_0$ presented.

There are four possible outcomes of hypothesis testing procedure, as shown in the following table:

As the table shows, there are two ways to be right and two ways to be wrong. Typically to reject $H_0$ when it is actually true is a more serious error than to fail to reject it when it is false, so the former error is labeled “ Type I ” and the latter error “ Type II ”.

Definition: Type I and Type II errors

In a test of hypotheses:

A Type I error is the decision to reject $H_0$ when it is in fact true.
A Type II error is the decision not to reject $H_0$ when it is in fact not true.

Unless we perform a census we do not have certain knowledge, so we do not know whether our decision matches the true state of nature or if we have made an error. We reject $H_0$ if what we observe would be a “rare” event if $H_0$ were true. But rare events are not impossible: they occur with probability $\alpha$. Thus when $H_0$ is true, a rare event will be observed in the proportion $\alpha$ of repeated similar tests, and $H_0$ will be erroneously rejected in those tests. Thus $\alpha$ is the probability that in following the testing procedure to decide between $H_0$ and $H_a$ we will make a Type I error.

Definition: level of significance

The number $\alpha$ that is used to determine the rejection region is called the level of significance of the test. It is the probability that the test procedure will result in a Type I error .

The probability of making a Type II error is too complicated to discuss in a beginning text, so we will say no more about it than this: for a fixed sample size, choosing $alpha$ smaller in order to reduce the chance of making a Type I error has the effect of increasing the chance of making a Type II error . The only way to simultaneously reduce the chances of making either kind of error is to increase the sample size.

Standardizing the Test Statistic

Hypotheses testing will be considered in a number of contexts, and great unification as well as simplification results when the relevant sample statistic is standardized by subtracting its mean from it and then dividing by its standard deviation. The resulting statistic is called a standardized test statistic . In every situation treated in this and the following two chapters the standardized test statistic will have either the standard normal distribution or Student’s $t$-distribution.

Definition: hypothesis test

A standardized test statistic for a hypothesis test is the statistic that is formed by subtracting from the statistic of interest its mean and dividing by its standard deviation.

For example, reviewing Example $\PageIndex{3}$, if instead of working with the sample mean $\overline{X}$ we instead work with the test statistic

\[\frac{\overline{X}-8.0}{0.067} \nonumber \]

then the distribution involved is standard normal and the critical values are just $\pm z_{0.05}$. The extra work that was done to find that $C=7.89$ and $C′=8.11$ is eliminated. In every hypothesis test in this book the standardized test statistic will be governed by either the standard normal distribution or Student’s $t$-distribution. Information about rejection regions is summarized in the following tables:

Every instance of hypothesis testing discussed in this and the following two chapters will have a rejection region like one of the six forms tabulated in the tables above.

No matter what the context a test of hypotheses can always be performed by applying the following systematic procedure, which will be illustrated in the examples in the succeeding sections.

Systematic Hypothesis Testing Procedure: Critical Value Approach

Identify the null and alternative hypotheses.
Identify the relevant test statistic and its distribution.
Compute from the data the value of the test statistic.
Construct the rejection region.
Compare the value computed in Step 3 to the rejection region constructed in Step 4 and make a decision. Formulate the decision in the context of the problem, if applicable.

The procedure that we have outlined in this section is called the “Critical Value Approach” to hypothesis testing to distinguish it from an alternative but equivalent approach that will be introduced at the end of Section 8.3.

Key Takeaway

A test of hypotheses is a statistical process for deciding between two competing assertions about a population parameter.
The testing procedure is formalized in a five-step procedure.

Module 9: Hypothesis Testing With One Sample

Null and alternative hypotheses, learning outcomes.

Describe hypothesis testing in general and in practice

The actual test begins by considering two hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.

H 0 : The null hypothesis: It is a statement about the population that either is believed to be true or is used to put forth an argument unless it can be shown to be incorrect beyond a reasonable doubt.

H a : The alternative hypothesis : It is a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .

Since the null and alternative hypotheses are contradictory, you must examine evidence to decide if you have enough evidence to reject the null hypothesis or not. The evidence is in the form of sample data.

After you have determined which hypothesis the sample supports, you make adecision. There are two options for a decision . They are “reject H 0 ” if the sample information favors the alternative hypothesis or “do not reject H 0 ” or “decline to reject H 0 ” if the sample information is insufficient to reject the null hypothesis.

Mathematical Symbols Used in H 0 and H a :

H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers (including one of the co-authors in research work) use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.

H 0 : No more than 30% of the registered voters in Santa Clara County voted in the primary election. p ≤ 30

H a : More than 30% of the registered voters in Santa Clara County voted in the primary election. p > 30

A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25%. State the null and alternative hypotheses.

H 0 : The drug reduces cholesterol by 25%. p = 0.25

H a : The drug does not reduce cholesterol by 25%. p ≠ 0.25

We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are:

H 0 : μ = 2.0

H a : μ ≠ 2.0

We want to test whether the mean height of eighth graders is 66 inches. State the null and alternative hypotheses. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : μ __ 66 H a : μ __ 66

H 0 : μ = 66
H a : μ ≠ 66

We want to test if college students take less than five years to graduate from college, on the average. The null and alternative hypotheses are:

H 0 : μ ≥ 5

H a : μ < 5

We want to test if it takes fewer than 45 minutes to teach a lesson plan. State the null and alternative hypotheses. Fill in the correct symbol ( =, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : μ __ 45 H a : μ __ 45

H 0 : μ ≥ 45
H a : μ < 45

In an issue of U.S. News and World Report , an article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third pass. The same article stated that 6.6% of U.S. students take advanced placement exams and 4.4% pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6%. State the null and alternative hypotheses.

H 0 : p ≤ 0.066

H a : p > 0.066

On a state driver’s test, about 40% pass the test on the first try. We want to test if more than 40% pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : p __ 0.40 H a : p __ 0.40

H 0 : p = 0.40
H a : p > 0.40

Concept Review

In a hypothesis test , sample data is evaluated in order to arrive at a decision about some type of claim. If certain conditions about the sample are satisfied, then the claim can be evaluated for a population. In a hypothesis test, we: Evaluate the null hypothesis , typically denoted with H 0 . The null is not rejected unless the hypothesis test shows otherwise. The null statement must always contain some form of equality (=, ≤ or ≥) Always write the alternative hypothesis , typically denoted with H a or H 1 , using less than, greater than, or not equals symbols, i.e., (≠, >, or <). If we reject the null hypothesis, then we can assume there is enough evidence to support the alternative hypothesis. Never state that a claim is proven true or false. Keep in mind the underlying fact that hypothesis testing is based on probability laws; therefore, we can talk only in terms of non-absolute certainties.

Formula Review

H 0 and H a are contradictory.

OpenStax, Statistics, Null and Alternative Hypotheses. Provided by : OpenStax. Located at : http://cnx.org/contents/[email protected]:58/Introductory_Statistics . License : CC BY: Attribution
Introductory Statistics . Authored by : Barbara Illowski, Susan Dean. Provided by : Open Stax. Located at : http://cnx.org/contents/[email protected] . License : CC BY: Attribution . License Terms : Download for free at http://cnx.org/contents/[email protected]
Simple hypothesis testing | Probability and Statistics | Khan Academy. Authored by : Khan Academy. Located at : https://youtu.be/5D1gV37bKXY . License : All Rights Reserved . License Terms : Standard YouTube License

9.1 Null and Alternative Hypotheses

The actual test begins by considering two hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.

H 0 , the — null hypothesis: a statement of no difference between sample means or proportions or no difference between a sample mean or proportion and a population mean or proportion. In other words, the difference equals 0.

H a —, the alternative hypothesis: a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .

After you have determined which hypothesis the sample supports, you make a decision. There are two options for a decision. They are reject H 0 if the sample information favors the alternative hypothesis or do not reject H 0 or decline to reject H 0 if the sample information is insufficient to reject the null hypothesis.

Mathematical Symbols Used in H 0 and H a :

H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.

Example 9.1

H 0 : No more than 30 percent of the registered voters in Santa Clara County voted in the primary election. p ≤ 30 H a : More than 30 percent of the registered voters in Santa Clara County voted in the primary election. p > 30

A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25 percent. State the null and alternative hypotheses.

Example 9.2

We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are the following: H 0 : μ = 2.0 H a : μ ≠ 2.0

H 0 : μ __ 66
H a : μ __ 66

Example 9.3

We want to test if college students take fewer than five years to graduate from college, on the average. The null and alternative hypotheses are the following: H 0 : μ ≥ 5 H a : μ < 5

H 0 : μ __ 45
H a : μ __ 45

Example 9.4

An article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third of the students pass. The same article stated that 6.6 percent of U.S. students take advanced placement exams and 4.4 percent pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6 percent. State the null and alternative hypotheses. H 0 : p ≤ 0.066 H a : p > 0.066

On a state driver’s test, about 40 percent pass the test on the first try. We want to test if more than 40 percent pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

H 0 : p __ 0.40
H a : p __ 0.40

Collaborative Exercise

Bring to class a newspaper, some news magazines, and some internet articles. In groups, find articles from which your group can write null and alternative hypotheses. Discuss your hypotheses with the rest of the class.

As an Amazon Associate we earn from qualifying purchases.

This book may not be used in the training of large language models or otherwise be ingested into large language models or generative AI offerings without OpenStax's permission.

Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute Texas Education Agency (TEA). The original material is available at: https://www.texasgateway.org/book/tea-statistics . Changes were made to the original material, including updates to art, structure, and other content updates.

Access for free at https://openstax.org/books/statistics/pages/1-introduction

Authors: Barbara Illowsky, Susan Dean
Publisher/website: OpenStax
Book title: Statistics
Publication date: Mar 27, 2020
Location: Houston, Texas
Book URL: https://openstax.org/books/statistics/pages/1-introduction
Section URL: https://openstax.org/books/statistics/pages/9-1-null-and-alternative-hypotheses

© Jan 23, 2024 Texas Education Agency (TEA). The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.

Search Search Please fill out this field.
Fundamental Analysis

Hypothesis to Be Tested: Definition and 4 Steps for Testing with Example

What Is Hypothesis Testing?

Hypothesis testing, sometimes called significance testing, is an act in statistics whereby an analyst tests an assumption regarding a population parameter. The methodology employed by the analyst depends on the nature of the data used and the reason for the analysis.

Hypothesis testing is used to assess the plausibility of a hypothesis by using sample data. Such data may come from a larger population, or from a data-generating process. The word "population" will be used for both of these cases in the following descriptions.

Key Takeaways

Hypothesis testing is used to assess the plausibility of a hypothesis by using sample data.
The test provides evidence concerning the plausibility of the hypothesis, given the data.
Statistical analysts test a hypothesis by measuring and examining a random sample of the population being analyzed.
The four steps of hypothesis testing include stating the hypotheses, formulating an analysis plan, analyzing the sample data, and analyzing the result.

How Hypothesis Testing Works

In hypothesis testing, an analyst tests a statistical sample, with the goal of providing evidence on the plausibility of the null hypothesis.

Statistical analysts test a hypothesis by measuring and examining a random sample of the population being analyzed. All analysts use a random population sample to test two different hypotheses: the null hypothesis and the alternative hypothesis.

The null hypothesis is usually a hypothesis of equality between population parameters; e.g., a null hypothesis may state that the population mean return is equal to zero. The alternative hypothesis is effectively the opposite of a null hypothesis (e.g., the population mean return is not equal to zero). Thus, they are mutually exclusive , and only one can be true. However, one of the two hypotheses will always be true.

The null hypothesis is a statement about a population parameter, such as the population mean, that is assumed to be true.

4 Steps of Hypothesis Testing

All hypotheses are tested using a four-step process:

The first step is for the analyst to state the hypotheses.
The second step is to formulate an analysis plan, which outlines how the data will be evaluated.
The third step is to carry out the plan and analyze the sample data.
The final step is to analyze the results and either reject the null hypothesis, or state that the null hypothesis is plausible, given the data.

Real-World Example of Hypothesis Testing

If, for example, a person wants to test that a penny has exactly a 50% chance of landing on heads, the null hypothesis would be that 50% is correct, and the alternative hypothesis would be that 50% is not correct.

Mathematically, the null hypothesis would be represented as Ho: P = 0.5. The alternative hypothesis would be denoted as "Ha" and be identical to the null hypothesis, except with the equal sign struck-through, meaning that it does not equal 50%.

A random sample of 100 coin flips is taken, and the null hypothesis is then tested. If it is found that the 100 coin flips were distributed as 40 heads and 60 tails, the analyst would assume that a penny does not have a 50% chance of landing on heads and would reject the null hypothesis and accept the alternative hypothesis.

If, on the other hand, there were 48 heads and 52 tails, then it is plausible that the coin could be fair and still produce such a result. In cases such as this where the null hypothesis is "accepted," the analyst states that the difference between the expected results (50 heads and 50 tails) and the observed results (48 heads and 52 tails) is "explainable by chance alone."

Some staticians attribute the first hypothesis tests to satirical writer John Arbuthnot in 1710, who studied male and female births in England after observing that in nearly every year, male births exceeded female births by a slight proportion. Arbuthnot calculated that the probability of this happening by chance was small, and therefore it was due to “divine providence.”

What is Hypothesis Testing?

Hypothesis testing refers to a process used by analysts to assess the plausibility of a hypothesis by using sample data. In hypothesis testing, statisticians formulate two hypotheses: the null hypothesis and the alternative hypothesis. A null hypothesis determines there is no difference between two groups or conditions, while the alternative hypothesis determines that there is a difference. Researchers evaluate the statistical significance of the test based on the probability that the null hypothesis is true.

What are the Four Key Steps Involved in Hypothesis Testing?

Hypothesis testing begins with an analyst stating two hypotheses, with only one that can be right. The analyst then formulates an analysis plan, which outlines how the data will be evaluated. Next, they move to the testing phase and analyze the sample data. Finally, the analyst analyzes the results and either rejects the null hypothesis or states that the null hypothesis is plausible, given the data.

What are the Benefits of Hypothesis Testing?

Hypothesis testing helps assess the accuracy of new ideas or theories by testing them against data. This allows researchers to determine whether the evidence supports their hypothesis, helping to avoid false claims and conclusions. Hypothesis testing also provides a framework for decision-making based on data rather than personal opinions or biases. By relying on statistical analysis, hypothesis testing helps to reduce the effects of chance and confounding variables, providing a robust framework for making informed conclusions.

What are the Limitations of Hypothesis Testing?

Hypothesis testing relies exclusively on data and doesn’t provide a comprehensive understanding of the subject being studied. Additionally, the accuracy of the results depends on the quality of the available data and the statistical methods used. Inaccurate data or inappropriate hypothesis formulation may lead to incorrect conclusions or failed tests. Hypothesis testing can also lead to errors, such as analysts either accepting or rejecting a null hypothesis when they shouldn’t have. These errors may result in false conclusions or missed opportunities to identify significant patterns or relationships in the data.

The Bottom Line

Hypothesis testing refers to a statistical process that helps researchers and/or analysts determine the reliability of a study. By using a well-formulated hypothesis and set of statistical tests, individuals or businesses can make inferences about the population that they are studying and draw conclusions based on the data presented. There are different types of hypothesis testing, each with their own set of rules and procedures. However, all hypothesis testing methods have the same four step process, which includes stating the hypotheses, formulating an analysis plan, analyzing the sample data, and analyzing the result. Hypothesis testing plays a vital part of the scientific process, helping to test assumptions and make better data-based decisions.

Sage. " Introduction to Hypothesis Testing. " Page 4.

Elder Research. " Who Invented the Null Hypothesis? "

Formplus. " Hypothesis Testing: Definition, Uses, Limitations and Examples. "

Terms of Service
Editorial Policy
Privacy Policy
Your Privacy Choices

Statistics Made Easy

How to Write Hypothesis Test Conclusions (With Examples)

A hypothesis test is used to test whether or not some hypothesis about a population parameter is true.

To perform a hypothesis test in the real world, researchers obtain a random sample from the population and perform a hypothesis test on the sample data, using a null and alternative hypothesis:

Null Hypothesis (H 0 ): The sample data occurs purely from chance.
Alternative Hypothesis (H A ): The sample data is influenced by some non-random cause.

If the p-value of the hypothesis test is less than some significance level (e.g. α = .05), then we reject the null hypothesis .

Otherwise, if the p-value is not less than some significance level then we fail to reject the null hypothesis .

When writing the conclusion of a hypothesis test, we typically include:

Whether we reject or fail to reject the null hypothesis.
The significance level.
A short explanation in the context of the hypothesis test.

For example, we would write:

We reject the null hypothesis at the 5% significance level. There is sufficient evidence to support the claim that…

Or, we would write:

We fail to reject the null hypothesis at the 5% significance level. There is not sufficient evidence to support the claim that…

The following examples show how to write a hypothesis test conclusion in both scenarios.

Example 1: Reject the Null Hypothesis Conclusion

Suppose a biologist believes that a certain fertilizer will cause plants to grow more during a one-month period than they normally do, which is currently 20 inches. To test this, she applies the fertilizer to each of the plants in her laboratory for one month.

She then performs a hypothesis test at a 5% significance level using the following hypotheses:

H 0 : μ = 20 inches (the fertilizer will have no effect on the mean plant growth)
H A : μ > 20 inches (the fertilizer will cause mean plant growth to increase)

Suppose the p-value of the test turns out to be 0.002.

Here is how she would report the results of the hypothesis test:

We reject the null hypothesis at the 5% significance level. There is sufficient evidence to support the claim that this particular fertilizer causes plants to grow more during a one-month period than they normally do.

Example 2: Fail to Reject the Null Hypothesis Conclusion

Suppose the manager of a manufacturing plant wants to test whether or not some new method changes the number of defective widgets produced per month, which is currently 250. To test this, he measures the mean number of defective widgets produced before and after using the new method for one month.

He performs a hypothesis test at a 10% significance level using the following hypotheses:

H 0 : μ after = μ before (the mean number of defective widgets is the same before and after using the new method)
H A : μ after ≠ μ before (the mean number of defective widgets produced is different before and after using the new method)

Suppose the p-value of the test turns out to be 0.27.

Here is how he would report the results of the hypothesis test:

We fail to reject the null hypothesis at the 10% significance level. There is not sufficient evidence to support the claim that the new method leads to a change in the number of defective widgets produced per month.

Additional Resources

The following tutorials provide additional information about hypothesis testing:

Introduction to Hypothesis Testing 4 Examples of Hypothesis Testing in Real Life How to Write a Null Hypothesis

Featured Posts

Hey there. My name is Zach Bobbitt. I have a Masters of Science degree in Applied Statistics and I’ve worked on machine learning algorithms for professional businesses in both healthcare and retail. I’m passionate about statistics, machine learning, and data visualization and I created Statology to be a resource for both students and teachers alike. My goal with this site is to help you learn statistics through using simple terms, plenty of real-world examples, and helpful illustrations.

User Preferences

Content preview.

Arcu felis bibendum ut tristique et egestas quis:

Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris
Duis aute irure dolor in reprehenderit in voluptate
Excepteur sint occaecat cupidatat non proident

Keyboard Shortcuts

S.3 hypothesis testing.

In reviewing hypothesis tests, we start first with the general idea. Then, we keep returning to the basic procedures of hypothesis testing, each time adding a little more detail.

The general idea of hypothesis testing involves:

Making an initial assumption.
Collecting evidence (data).
Based on the available evidence (data), deciding whether to reject or not reject the initial assumption.

Every hypothesis test — regardless of the population parameter involved — requires the above three steps.

Example S.3.1

Is normal body temperature really 98.6 degrees f section .

Consider the population of many, many adults. A researcher hypothesized that the average adult body temperature is lower than the often-advertised 98.6 degrees F. That is, the researcher wants an answer to the question: "Is the average adult body temperature 98.6 degrees? Or is it lower?" To answer his research question, the researcher starts by assuming that the average adult body temperature was 98.6 degrees F.

Then, the researcher went out and tried to find evidence that refutes his initial assumption. In doing so, he selects a random sample of 130 adults. The average body temperature of the 130 sampled adults is 98.25 degrees.

Then, the researcher uses the data he collected to make a decision about his initial assumption. It is either likely or unlikely that the researcher would collect the evidence he did given his initial assumption that the average adult body temperature is 98.6 degrees:

If it is likely , then the researcher does not reject his initial assumption that the average adult body temperature is 98.6 degrees. There is not enough evidence to do otherwise.
either the researcher's initial assumption is correct and he experienced a very unusual event;
or the researcher's initial assumption is incorrect.

In statistics, we generally don't make claims that require us to believe that a very unusual event happened. That is, in the practice of statistics, if the evidence (data) we collected is unlikely in light of the initial assumption, then we reject our initial assumption.

Example S.3.2

Criminal trial analogy section .

One place where you can consistently see the general idea of hypothesis testing in action is in criminal trials held in the United States. Our criminal justice system assumes "the defendant is innocent until proven guilty." That is, our initial assumption is that the defendant is innocent.

In the practice of statistics, we make our initial assumption when we state our two competing hypotheses -- the null hypothesis ( H 0 ) and the alternative hypothesis ( H A ). Here, our hypotheses are:

H 0 : Defendant is not guilty (innocent)
H A : Defendant is guilty

In statistics, we always assume the null hypothesis is true . That is, the null hypothesis is always our initial assumption.

The prosecution team then collects evidence — such as finger prints, blood spots, hair samples, carpet fibers, shoe prints, ransom notes, and handwriting samples — with the hopes of finding "sufficient evidence" to make the assumption of innocence refutable.

In statistics, the data are the evidence.

The jury then makes a decision based on the available evidence:

If the jury finds sufficient evidence — beyond a reasonable doubt — to make the assumption of innocence refutable, the jury rejects the null hypothesis and deems the defendant guilty. We behave as if the defendant is guilty.
If there is insufficient evidence, then the jury does not reject the null hypothesis . We behave as if the defendant is innocent.

In statistics, we always make one of two decisions. We either "reject the null hypothesis" or we "fail to reject the null hypothesis."

Errors in Hypothesis Testing Section

Did you notice the use of the phrase "behave as if" in the previous discussion? We "behave as if" the defendant is guilty; we do not "prove" that the defendant is guilty. And, we "behave as if" the defendant is innocent; we do not "prove" that the defendant is innocent.

This is a very important distinction! We make our decision based on evidence not on 100% guaranteed proof. Again:

If we reject the null hypothesis, we do not prove that the alternative hypothesis is true.
If we do not reject the null hypothesis, we do not prove that the null hypothesis is true.

We merely state that there is enough evidence to behave one way or the other. This is always true in statistics! Because of this, whatever the decision, there is always a chance that we made an error .

Let's review the two types of errors that can be made in criminal trials:

Table S.3.2 shows how this corresponds to the two types of errors in hypothesis testing.

Note that, in statistics, we call the two types of errors by two different names -- one is called a "Type I error," and the other is called a "Type II error." Here are the formal definitions of the two types of errors:

There is always a chance of making one of these errors. But, a good scientific study will minimize the chance of doing so!

Making the Decision Section

Recall that it is either likely or unlikely that we would observe the evidence we did given our initial assumption. If it is likely , we do not reject the null hypothesis. If it is unlikely , then we reject the null hypothesis in favor of the alternative hypothesis. Effectively, then, making the decision reduces to determining "likely" or "unlikely."

In statistics, there are two ways to determine whether the evidence is likely or unlikely given the initial assumption:

We could take the " critical value approach " (favored in many of the older textbooks).
Or, we could take the " P -value approach " (what is used most often in research, journal articles, and statistical software).

In the next two sections, we review the procedures behind each of these two approaches. To make our review concrete, let's imagine that μ is the average grade point average of all American students who major in mathematics. We first review the critical value approach for conducting each of the following three hypothesis tests about the population mean $\mu$:

In Practice

We would want to conduct the first hypothesis test if we were interested in concluding that the average grade point average of the group is more than 3.
We would want to conduct the second hypothesis test if we were interested in concluding that the average grade point average of the group is less than 3.
And, we would want to conduct the third hypothesis test if we were only interested in concluding that the average grade point average of the group differs from 3 (without caring whether it is more or less than 3).

Upon completing the review of the critical value approach, we review the P -value approach for conducting each of the above three hypothesis tests about the population mean $\mu$. The procedures that we review here for both approaches easily extend to hypothesis tests about any other population parameter.

Get science-backed answers as you write with Paperpal's Research feature

How to Write a Hypothesis? Types and Examples

All research studies involve the use of the scientific method, which is a mathematical and experimental technique used to conduct experiments by developing and testing a hypothesis or a prediction about an outcome. Simply put, a hypothesis is a suggested solution to a problem. It includes elements that are expressed in terms of relationships with each other to explain a condition or an assumption that hasn’t been verified using facts. 1 The typical steps in a scientific method include developing such a hypothesis, testing it through various methods, and then modifying it based on the outcomes of the experiments.

A research hypothesis can be defined as a specific, testable prediction about the anticipated results of a study. 2 Hypotheses help guide the research process and supplement the aim of the study. After several rounds of testing, hypotheses can help develop scientific theories. 3 Hypotheses are often written as if-then statements.

Here are two hypothesis examples:

Dandelions growing in nitrogen-rich soils for two weeks develop larger leaves than those in nitrogen-poor soils because nitrogen stimulates vegetative growth. 4

If a company offers flexible work hours, then their employees will be happier at work. 5

What is a hypothesis?
Types of hypotheses
Characteristics of a hypothesis
Functions of a hypothesis
How to write a hypothesis
Hypothesis examples
Frequently asked questions

What is a hypothesis?

A hypothesis expresses an expected relationship between variables in a study and is developed before conducting any research. Hypotheses are not opinions but rather are expected relationships based on facts and observations. They help support scientific research and expand existing knowledge. An incorrectly formulated hypothesis can affect the entire experiment leading to errors in the results so it’s important to know how to formulate a hypothesis and develop it carefully.

A few sources of a hypothesis include observations from prior studies, current research and experiences, competitors, scientific theories, and general conditions that can influence people. Figure 1 depicts the different steps in a research design and shows where exactly in the process a hypothesis is developed. 4

There are seven different types of hypotheses—simple, complex, directional, nondirectional, associative and causal, null, and alternative.

Types of hypotheses

The seven types of hypotheses are listed below: 5 , 6,7

Simple : Predicts the relationship between a single dependent variable and a single independent variable.

Example: Exercising in the morning every day will increase your productivity.

Complex : Predicts the relationship between two or more variables.

Example: Spending three hours or more on social media daily will negatively affect children’s mental health and productivity, more than that of adults.

Directional : Specifies the expected direction to be followed and uses terms like increase, decrease, positive, negative, more, or less.

Example: The inclusion of intervention X decreases infant mortality compared to the original treatment.

Non-directional : Does not predict the exact direction, nature, or magnitude of the relationship between two variables but rather states the existence of a relationship. This hypothesis may be used when there is no underlying theory or if findings contradict prior research.

Example: Cats and dogs differ in the amount of affection they express.

Associative and causal : An associative hypothesis suggests an interdependency between variables, that is, how a change in one variable changes the other.

Example: There is a positive association between physical activity levels and overall health.

A causal hypothesis, on the other hand, expresses a cause-and-effect association between variables.

Example: Long-term alcohol use causes liver damage.

Null : Claims that the original hypothesis is false by showing that there is no relationship between the variables.

Example: Sleep duration does not have any effect on productivity.

Alternative : States the opposite of the null hypothesis, that is, a relationship exists between two variables.

Example: Sleep duration affects productivity.

Characteristics of a hypothesis

So, what makes a good hypothesis? Here are some important characteristics of a hypothesis. 8,9

Testable : You must be able to test the hypothesis using scientific methods to either accept or reject the prediction.
Falsifiable : It should be possible to collect data that reject rather than support the hypothesis.
Logical : Hypotheses shouldn’t be a random guess but rather should be based on previous theories, observations, prior research, and logical reasoning.
Positive : The hypothesis statement about the existence of an association should be positive, that is, it should not suggest that an association does not exist. Therefore, the language used and knowing how to phrase a hypothesis is very important.
Clear and accurate : The language used should be easily comprehensible and use correct terminology.
Relevant : The hypothesis should be relevant and specific to the research question.
Structure : Should include all the elements that make a good hypothesis: variables, relationship, and outcome.

Functions of a hypothesis

The following list mentions some important functions of a hypothesis: 1

Maintains the direction and progress of the research.
Expresses the important assumptions underlying the proposition in a single statement.
Establishes a suitable context for researchers to begin their investigation and for readers who are referring to the final report.
Provides an explanation for the occurrence of a specific phenomenon.
Ensures selection of appropriate and accurate facts necessary and relevant to the research subject.

To summarize, a hypothesis provides the conceptual elements that complete the known data, conceptual relationships that systematize unordered elements, and conceptual meanings and interpretations that explain the unknown phenomena. 1

How to write a hypothesis

Listed below are the main steps explaining how to write a hypothesis. 2,4,5

Make an observation and identify variables : Observe the subject in question and try to recognize a pattern or a relationship between the variables involved. This step provides essential background information to begin your research.

For example, if you notice that an office’s vending machine frequently runs out of a specific snack, you may predict that more people in the office choose that snack over another.

Identify the main research question : After identifying a subject and recognizing a pattern, the next step is to ask a question that your hypothesis will answer.

For example, after observing employees’ break times at work, you could ask “why do more employees take breaks in the morning rather than in the afternoon?”

Conduct some preliminary research to ensure originality and novelty : Your initial answer, which is your hypothesis, to the question is based on some pre-existing information about the subject. However, to ensure that your hypothesis has not been asked before or that it has been asked but rejected by other researchers you would need to gather additional information.

For example, based on your observations you might state a hypothesis that employees work more efficiently when the air conditioning in the office is set at a lower temperature. However, during your preliminary research you find that this hypothesis was proven incorrect by a prior study.

Develop a general statement : After your preliminary research has confirmed the originality of your proposed answer, draft a general statement that includes all variables, subjects, and predicted outcome. The statement could be if/then or declarative.
Finalize the hypothesis statement : Use the PICOT model, which clarifies how to word a hypothesis effectively, when finalizing the statement. This model lists the important components required to write a hypothesis.

P opulation: The specific group or individual who is the main subject of the research

I nterest: The main concern of the study/research question

C omparison: The main alternative group

O utcome: The expected results

T ime: Duration of the experiment

Once you’ve finalized your hypothesis statement you would need to conduct experiments to test whether the hypothesis is true or false.

Hypothesis examples

The following table provides examples of different types of hypotheses. 10 ,11

Key takeaways

Here’s a summary of all the key points discussed in this article about how to write a hypothesis.

A hypothesis is an assumption about an association between variables made based on limited evidence, which should be tested.
A hypothesis has four parts—the research question, independent variable, dependent variable, and the proposed relationship between the variables.
The statement should be clear, concise, testable, logical, and falsifiable.
There are seven types of hypotheses—simple, complex, directional, non-directional, associative and causal, null, and alternative.
A hypothesis provides a focus and direction for the research to progress.
A hypothesis plays an important role in the scientific method by helping to create an appropriate experimental design.

Frequently asked questions

Hypotheses and research questions have different objectives and structure. The following table lists some major differences between the two. 9

Here are a few examples to differentiate between a research question and hypothesis.

Yes, here’s a simple checklist to help you gauge the effectiveness of your hypothesis. 9 1. When writing a hypothesis statement, check if it: 2. Predicts the relationship between the stated variables and the expected outcome. 3. Uses simple and concise language and is not wordy. 4. Does not assume readers’ knowledge about the subject. 5. Has observable, falsifiable, and testable results.

As mentioned earlier in this article, a hypothesis is an assumption or prediction about an association between variables based on observations and simple evidence. These statements are usually generic. Research objectives, on the other hand, are more specific and dictated by hypotheses. The same hypothesis can be tested using different methods and the research objectives could be different in each case. For example, Louis Pasteur observed that food lasts longer at higher altitudes, reasoned that it could be because the air at higher altitudes is cleaner (with fewer or no germs), and tested the hypothesis by exposing food to air cleaned in the laboratory. 12 Thus, a hypothesis is predictive—if the reasoning is correct, X will lead to Y—and research objectives are developed to test these predictions.

Null hypothesis testing is a method to decide between two assumptions or predictions between variables (null and alternative hypotheses) in a statistical relationship in a sample. The null hypothesis, denoted as H 0 , claims that no relationship exists between variables in a population and any relationship in the sample reflects a sampling error or occurrence by chance. The alternative hypothesis, denoted as H 1 , claims that there is a relationship in the population. In every study, researchers need to decide whether the relationship in a sample occurred by chance or reflects a relationship in the population. This is done by hypothesis testing using the following steps: 13 1. Assume that the null hypothesis is true. 2. Determine how likely the sample relationship would be if the null hypothesis were true. This probability is called the p value. 3. If the sample relationship would be extremely unlikely, reject the null hypothesis and accept the alternative hypothesis. If the relationship would not be unlikely, accept the null hypothesis.

To summarize, researchers should know how to write a good hypothesis to ensure that their research progresses in the required direction. A hypothesis is a testable prediction about any behavior or relationship between variables, usually based on facts and observation, and states an expected outcome.

We hope this article has provided you with essential insight into the different types of hypotheses and their functions so that you can use them appropriately in your next research project.

References

Dalen, DVV. The function of hypotheses in research. Proquest website. Accessed April 8, 2024. https://www.proquest.com/docview/1437933010?pq-origsite=gscholar&fromopenview=true&sourcetype=Scholarly%20Journals&imgSeq=1
McLeod S. Research hypothesis in psychology: Types & examples. SimplyPsychology website. Updated December 13, 2023. Accessed April 9, 2024. https://www.simplypsychology.org/what-is-a-hypotheses.html
Scientific method. Britannica website. Updated March 14, 2024. Accessed April 9, 2024. https://www.britannica.com/science/scientific-method
The hypothesis in science writing. Accessed April 10, 2024. https://berks.psu.edu/sites/berks/files/campus/HypothesisHandout_Final.pdf
How to develop a hypothesis (with elements, types, and examples). Indeed.com website. Updated February 3, 2023. Accessed April 10, 2024. https://www.indeed.com/career-advice/career-development/how-to-write-a-hypothesis
Types of research hypotheses. Excelsior online writing lab. Accessed April 11, 2024. https://owl.excelsior.edu/research/research-hypotheses/types-of-research-hypotheses/
What is a research hypothesis: how to write it, types, and examples. Researcher.life website. Published February 8, 2023. Accessed April 11, 2024. https://researcher.life/blog/article/how-to-write-a-research-hypothesis-definition-types-examples/
Developing a hypothesis. Pressbooks website. Accessed April 12, 2024. https://opentext.wsu.edu/carriecuttler/chapter/developing-a-hypothesis/
What is and how to write a good hypothesis in research. Elsevier author services website. Accessed April 12, 2024. https://scientific-publishing.webshop.elsevier.com/manuscript-preparation/what-how-write-good-hypothesis-research/
How to write a great hypothesis. Verywellmind website. Updated March 12, 2023. Accessed April 13, 2024. https://www.verywellmind.com/what-is-a-hypothesis-2795239
15 Hypothesis examples. Helpfulprofessor.com Published September 8, 2023. Accessed March 14, 2024. https://helpfulprofessor.com/hypothesis-examples/
Editage insights. What is the interconnectivity between research objectives and hypothesis? Published February 24, 2021. Accessed April 13, 2024. https://www.editage.com/insights/what-is-the-interconnectivity-between-research-objectives-and-hypothesis
Understanding null hypothesis testing. BCCampus open publishing. Accessed April 16, 2024. https://opentextbc.ca/researchmethods/chapter/understanding-null-hypothesis-testing/#:~:text=In%20null%20hypothesis%20testing%2C%20this,said%20to%20be%20statistically%20significant

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.

Experience the future of academic writing – Sign up to Paperpal and start writing for free!

Measuring Academic Success: Definition & Strategies for Excellence

What are scholarly sources and where can you find them , you may also like, what are scholarly sources and where can you..., what is academic writing: tips for students, why traditional editorial process needs an upgrade, paperpal’s new ai research finder empowers authors to..., what is hedging in academic writing , how to use ai to enhance your college..., ai + human expertise – a paradigm shift..., how to use paperpal to generate emails &..., ai in education: it’s time to change the....

school Campus Bookshelves
menu_book Bookshelves
perm_media Learning Objects
login Login
how_to_reg Request Instructor Account
hub Instructor Commons
Download Page (PDF)
Download Full Book (PDF)
Periodic Table
Physics Constants
Scientific Calculator
Reference & Cite
Tools expand_more
Readability

selected template will load here

This action is not available.

1.2: The 7-Step Process of Statistical Hypothesis Testing

Last updated
Save as PDF
Page ID 33320

Penn State's Department of Statistics
The Pennsylvania State University

We will cover the seven steps one by one.

Step 1: State the Null Hypothesis

The null hypothesis can be thought of as the opposite of the "guess" the researchers made: in this example, the biologist thinks the plant height will be different for the fertilizers. So the null would be that there will be no difference among the groups of plants. Specifically, in more statistical language the null for an ANOVA is that the means are the same. We state the null hypothesis as: \[H_{0}: \ \mu_{1} = \mu_{2} = \ldots = \mu_{T}\] for $T$ levels of an experimental treatment.

Why do we do this? Why not simply test the working hypothesis directly? The answer lies in the Popperian Principle of Falsification. Karl Popper (a philosopher) discovered that we can't conclusively confirm a hypothesis, but we can conclusively negate one. So we set up a null hypothesis which is effectively the opposite of the working hypothesis. The hope is that based on the strength of the data, we will be able to negate or reject the null hypothesis and accept an alternative hypothesis. In other words, we usually see the working hypothesis in $H_{A}$.

Step 2: State the Alternative Hypothesis

\[H_{A}: \ \text{treatment level means not all equal}\]

The reason we state the alternative hypothesis this way is that if the null is rejected, there are many possibilities.

For example, $\mu_{1} \neq \mu_{2} = \ldots = \mu_{T}$ is one possibility, as is $\mu_{1} = \mu_{2} \neq \mu_{3} = \ldots = \mu_{T}$. Many people make the mistake of stating the alternative hypothesis as $mu_{1} \neq mu_{2} \neq \ldots \neq \mu_{T}$, which says that every mean differs from every other mean. This is a possibility, but only one of many possibilities. To cover all alternative outcomes, we resort to a verbal statement of "not all equal" and then follow up with mean comparisons to find out where differences among means exist. In our example, this means that fertilizer 1 may result in plants that are really tall, but fertilizers 2, 3, and the plants with no fertilizers don't differ from one another. A simpler way of thinking about this is that at least one mean is different from all others.

Step 3: Set $\alpha$

If we look at what can happen in a hypothesis test, we can construct the following contingency table:

You should be familiar with type I and type II errors from your introductory course. It is important to note that we want to set $\alpha$ before the experiment ( a priori ) because the Type I error is the more grievous error to make. The typical value of $\alpha$ is 0.05, establishing a 95% confidence level. For this course, we will assume $\alpha$ =0.05, unless stated otherwise.

Step 4: Collect Data

Remember the importance of recognizing whether data is collected through an experimental design or observational study.

Step 5: Calculate a test statistic

For categorical treatment level means, we use an $F$ statistic, named after R.A. Fisher. We will explore the mechanics of computing the $F$ statistic beginning in Chapter 2. The $F$ value we get from the data is labeled $F_{\text{calculated}}$.

Step 6: Construct Acceptance / Rejection regions

As with all other test statistics, a threshold (critical) value of $F$ is established. This $F$ value can be obtained from statistical tables or software and is referred to as $F_{\text{critical}}$ or $F_{\alpha}$. As a reminder, this critical value is the minimum value for the test statistic (in this case the F test) for us to be able to reject the null.

The $F$ distribution, $F_{\alpha}$, and the location of acceptance and rejection regions are shown in the graph below:

Graph of the F distribution, with the point F_alpha marked on the x-axis. The area under the curve to the left of this point is marked "Accept null", and the area under the curve to the right of this point is marked "Reject null."

Step 7: Based on steps 5 and 6, draw a conclusion about H0

If the $F_{\text{\calculated}}$ from the data is larger than the $F_{\alpha}$, then you are in the rejection region and you can reject the null hypothesis with $(1 - \alpha)$ level of confidence.

Note that modern statistical software condenses steps 6 and 7 by providing a $p$-value. The $p$-value here is the probability of getting an $F_{\text{calculated}}$ even greater than what you observe assuming the null hypothesis is true. If by chance, the $F_{\text{calculated}} = F_{\alpha}$, then the $p$-value would exactly equal $\alpha$. With larger $F_{\text{calculated}}$ values, we move further into the rejection region and the $p$ - value becomes less than $\alpha$. So the decision rule is as follows:

If the $p$ - value obtained from the ANOVA is less than $\alpha$, then reject $H_{0}$ and accept $H_{A}$.

If you are not familiar with this material, we suggest that you review course materials from your basic statistics course.

Help | Advanced Search

Quantum Physics

Title: performance advantage of quantum hypothesis testing for partially coherent optical sources.

Abstract: Determining the presence of a potential optical source in the interest region is important for an imaging system and can be achieved by using hypothesis testing. The previous studies assume that the potential source is completely incoherent. In this paper, this problem is generalized to the scenario with partially coherent sources and any prior probabilities. We compare the error probability limit given by the quantum Helstrom bound with the error probability given by direct decision based on the prior probability. On this basis, the quantum-optimal detection advantage and detection-useless region are analyzed. For practical purposes, we propose a specific detection strategy using binary spatial-mode demultiplexing, which can be used in the scenarios without any prior information. This strategy shows superior detection performance and the results hold prospects for achieving super-resolved microscopic and astronomical imaging.

Submission history

Access paper:.

Other Formats

References & Citations

INSPIRE HEP
Google Scholar
Semantic Scholar

BibTeX formatted citation

Bibliographic and Citation Tools

Code, data and media associated with this article, recommenders and search tools.

Institution

arXivLabs: experimental projects with community collaborators

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs .

U.S. requires more dairy cows to be tested for bird flu as concerns grow

Dairy cows must be tested for bird flu before moving across state lines, under a federal order issued Wednesday, as evidence mounts that the virus is more widespread than feared among cows in the United States.

Biden administration officials said the move is meant to contain transmission of the virus known as H5N1 and to reduce the threat to livestock, but they maintained that the risk to humans remains low.

The trajectory of the outbreak has drawn public health concerns because it marks the first time bird flu has moved to cows. The virus is far more disruptive to the poultry industry, killing chickens and forcing mass culling of flocks. It generally causes mild or no sickness in cows. But greater transmission in mammals, particularly one regularly exposed to people, increases the risk that the virus could evolve to the point that it spreads more easily in humans.

Podcast episode

An order issued by the U.S. Agriculture Department that takes effect Monday requires every lactating dairy cow to be tested before moving across state lines. Cows carrying the virus would have to wait 30 days and test negative before being moved, officials said. Positive test results would trigger additional requirements for herd owners to disclose information, including the movement of animals, to aid epidemiologic investigations, and for laboratories and state veterinarians to report cases to the USDA.

“Requiring positive test reporting will help USDA better understand this disease and testing before interstate movement will limit the spread of the virus,” Mike Watson, administrator of the USDA’s Animal and Plant Health Inspection Service, told reporters.

“This is an evolving situation, and we are treating it seriously and with urgency,” he said.

The testing mandate could help overcome reluctance from some milk producers to allow testing in their herds, Watson said. The cost of mandatory testing would be reimbursed by the agency. Watson said federal officials are also working with state counterparts to potentially expand testing of cows when they are moved within a state.

The nation has roughly 8 million lactating cows, according to estimates , though it’s unclear how often they are moved across state lines. Watson did not provide an estimate for how many cows would be tested under the new order, though he described it as a “significant number.” He said labs have enough capacity to handle the increase and turn around results within days.

The National Milk Producers Federation, an industry group, called the USDA’s testing order “appropriate.”

“Dairy farmers stand ready to take a proactive approach to ensuring that we better understand the spread of the virus, do what we can to limit that spread, and ensure the health of our animals and workers,” Gregg Doud, the group’s president and CEO, said in a statement.

Voluntary testing protocols for cows, limited until now to those with symptoms, has drawn criticism from public health experts. They say the true toll of the virus is probably larger than official tallies confirming avian flu in dairy cows in eight states , as well as one human case in a Texas farmworker . That person has recovered.

“We are only really starting to understand the extent of it now,” said Angela Rasmussen, principal research scientist at the Vaccine and Infectious Disease Organization at the University of Saskatchewan in Canada. “The testing requirements are very warranted because certainly there are economic incentives for producers to not test.”

Testing uncovered fragments of the virus in milk sold at grocery stores, another sign that the virus is more prevalent in cows than official tallies show, including in asymptomatic cows. Federal officials stressed that existing research suggests pasteurization of milk and other milk products such as ice cream and cheese renders the virus unable to infect humans. Additional reviews, including the virus’s presence in other dairy products such as cream, are underway, with some results expected within days or weeks.

“We have seen nothing that would change our assessment that the commercial milk supply is safe,” said Don Prater, acting director of the Center for Food Safety and Applied Nutrition at the Food and Drug Administration. He also cautioned, “We also know that assessments can change as we learn more, and we will be transparent about any changes based on emerging data.”

Public health experts have also faulted the Biden administration for not sharing more data about the outbreak, warning that it could hinder scientific research and the global response.

Federal officials shared more than 200 genetic sequences of the virus taken from different animals, which scientists criticized for lacking metadata that provides crucial context, such as the location and timing of the specimen collection. Scientists who analyzed the sequencing said the available information strongly suggests that the spread of H5N1 to cows stems from a single spillover event from birds in late 2023.

“The evolutionary tree resoundingly indicates that this outbreak had a single origin and that it had been circulating under our noses for months before it was noticed,” said Michael Worobey, an evolutionary virologist at the University of Arizona who led the analysis. “It shows there are massive gaps in the system, and we need to do much better on the scientific side.”

IMAGES

PPT
Hypothesis Testing Steps & Examples
PPT
PPT
Solved Four steps of Hypothesis testing • Step 1: State the
PPT

VIDEO

Hypothsis Testing in Statistics Part 2 Steps to Solving a Problem
Cosmology 1
Hypothesis Testing 🔥 Explained in 60 Seconds
Hypothesis Testing Made Easy: These are the Steps
Statistics: Ch 9 Hypothesis Testing (2 of 35) How is Hypothesis Testing Used in Statistics?
Statistics: Ch 9 Hypothesis Testing (1 of 34) What is a Hypothesis?

COMMENTS

Hypothesis Testing
There are 5 main steps in hypothesis testing: State your research hypothesis as a null hypothesis and alternate hypothesis (H o) and (H a or H 1 ). Collect data in a way designed to test the hypothesis. Perform an appropriate statistical test. Decide whether to reject or fail to reject your null hypothesis. Present the findings in your results ...
7.1: Basics of Hypothesis Testing
Test Statistic: z = ¯ x − μo σ / √n since it is calculated as part of the testing of the hypothesis. Definition 7.1.4. p - value: probability that the test statistic will take on more extreme values than the observed test statistic, given that the null hypothesis is true.
Introduction to Hypothesis Testing
A hypothesis test consists of five steps: 1. State the hypotheses. State the null and alternative hypotheses. These two hypotheses need to be mutually exclusive, so if one is true then the other must be false. 2. Determine a significance level to use for the hypothesis. Decide on a significance level.
5.2
5.2 - Writing Hypotheses. The first step in conducting a hypothesis test is to write the hypothesis statements that are going to be tested. For each test you will have a null hypothesis ( H 0) and an alternative hypothesis ( H a ). When writing hypotheses there are three things that we need to know: (1) the parameter that we are testing (2) the ...
Hypothesis Testing
Example: Criminal Trial Analogy. First, state 2 hypotheses, the null hypothesis ("H 0 ") and the alternative hypothesis ("H A "). H 0: Defendant is not guilty.; H A: Defendant is guilty.; Usually the H 0 is a statement of "no effect", or "no change", or "chance only" about a population parameter.. While the H A, depending on the situation, is that there is a difference ...
6a.2
Below these are summarized into six such steps to conducting a test of a hypothesis. Set up the hypotheses and check conditions: Each hypothesis test includes two hypotheses about the population. One is the null hypothesis, notated as H 0, which is a statement of a particular parameter value. This hypothesis is assumed to be true until there is ...
9.1: Introduction to Hypothesis Testing
In hypothesis testing, the goal is to see if there is sufficient statistical evidence to reject a presumed null hypothesis in favor of a conjectured alternative hypothesis.The null hypothesis is usually denoted $H_0$ while the alternative hypothesis is usually denoted $H_1$. An hypothesis test is a statistical decision; the conclusion will either be to reject the null hypothesis in favor ...
9.2: Hypothesis Testing
On a state driver's test, about 40% pass the test on the first try. We want to test if more than 40% pass on the first try. Fill in the correct symbol ($=, \neq, \geq, <, \leq, >$) for the null and alternative hypotheses. $H_{0}: p_ 0.40$ ... In a hypothesis test, sample data is evaluated in order to arrive at a decision about some type ...
How to Test Statistical Hypotheses
Analyze sample data. Using sample data, perform computations called for in the analysis plan. Test statistic. When the null hypothesis involves a mean or proportion, use either of the following equations to compute the test statistic. Test statistic = (Statistic - Parameter) / (Standard deviation of statistic)
What is Hypothesis Testing?
A test of a statistical hypothesis, where the region of rejection is on both sides of the sampling distribution, is called a two-tailed test. For example, suppose the null hypothesis states that the mean is equal to 10. The alternative hypothesis would be that the mean is less than 10 or greater than 10.
8.1: The Elements of Hypothesis Testing
Hypothesis testing is a statistical procedure in which a choice is made between a null hypothesis and an alternative hypothesis based on information in a sample. The end result of a hypotheses testing procedure is a choice of one of the following two possible conclusions: Reject H0. H 0. (and therefore accept Ha.
Null and Alternative Hypotheses
The actual test begins by considering two hypotheses.They are called the null hypothesis and the alternative hypothesis.These hypotheses contain opposing viewpoints. H 0: The null hypothesis: It is a statement about the population that either is believed to be true or is used to put forth an argument unless it can be shown to be incorrect beyond a reasonable doubt.
Hypothesis Testing
Step 2: State the Alternate Hypothesis. The claim is that the students have above average IQ scores, so: H 1: μ > 100. The fact that we are looking for scores "greater than" a certain point means that this is a one-tailed test. Step 3: Draw a picture to help you visualize the problem. Step 4: State the alpha level.
9.1 Null and Alternative Hypotheses
The actual test begins by considering two hypotheses.They are called the null hypothesis and the alternative hypothesis.These hypotheses contain opposing viewpoints. H 0, the —null hypothesis: a statement of no difference between sample means or proportions or no difference between a sample mean or proportion and a population mean or proportion. In other words, the difference equals 0.
Hypothesis to Be Tested: Definition and 4 Steps for Testing with Example
Hypothesis testing is an act in statistics whereby an analyst tests an assumption regarding a population parameter. The methodology employed by the analyst depends on the nature of the data used ...
Test Statistic: Definition, Types & Formulas
A test statistic assesses how consistent your sample data are with the null hypothesis in a hypothesis test. Test statistic calculations take your sample data and boil them down to a single number that quantifies how much your sample diverges from the null hypothesis. As a test statistic value becomes more extreme, it indicates larger ...
T-test and Hypothesis Testing (Explained Simply)
The possible outcomes of hypothesis testing: Reject the null hypothesis —a person is found guilty. Fail to reject the null hypothesis — the accused is acquitted. David decided to state hypotheses in the following way: H₀ — There is no difference in the grade means of those students in class A and those from class B. H₁ — There is a ...
How to Write Hypothesis Test Conclusions (With Examples)
A hypothesis test is used to test whether or not some hypothesis about a population parameter is true.. To perform a hypothesis test in the real world, researchers obtain a random sample from the population and perform a hypothesis test on the sample data, using a null and alternative hypothesis:. Null Hypothesis (H 0): The sample data occurs purely from chance.
Choosing the Right Statistical Test
Statistical significance is a term used by researchers to state that it is unlikely their observations could have occurred under the null hypothesis of a statistical test. ... Hypothesis testing is a formal procedure for investigating our ideas about the world. It allows you to statistically test your predictions. 2204. Test statistics ...
S.3 Hypothesis Testing
S.3 Hypothesis Testing. In reviewing hypothesis tests, we start first with the general idea. Then, we keep returning to the basic procedures of hypothesis testing, each time adding a little more detail. The general idea of hypothesis testing involves: Making an initial assumption. Collecting evidence (data).
How to Write a Hypothesis? Types and Examples
Here are two hypothesis examples: Dandelions growing in nitrogen-rich soils for two weeks develop larger leaves than those in nitrogen-poor soils because nitrogen stimulates vegetative growth.4. If a company offers flexible work hours, then their employees will be happier at work.5.
1.2: The 7-Step Process of Statistical Hypothesis Testing
Step 1: State the Null Hypothesis. The null hypothesis can be thought of as the opposite of the "guess" the researchers made: in this example, the biologist thinks the plant height will be different for the fertilizers. So the null would be that there will be no difference among the groups of plants. Specifically, in more statistical language ...
Solved A company decided to test the hypothesis that the
A company decided to test the hypothesis that the average time a company's employees are spending to check their private e-mails at work is more than 9 minutes. A random sample of 50 employees were selected and they averaged 9.6 minutes. It is believed that the population standard deviation is 2.5 minutes. The \alpha is set to 0.05.
Perform a one-sample z-test for a population mean
Statistics and Probability questions and answers. Perform a one-sample z-test for a population mean using the P-value approach. Be sure to state the hypotheses and the significance level, to compute the vaiue of the test statistic, to obtain the P-value, and to state your conclusion. In the past, the mean running time for a certain type of ...
Akiko Iwasaki on what causes long COVID, brain fog, the Yale Paxlovid
Second hypothesis is on autoimmunity. So this is, you know, autoimmunity is basically T cells and B cells that are now recognizing host proteins or host antigens as something to attack. And that can happen with respect to—following multiple different types of stresses, including acute infection with SARS-COV-2.
Performance advantage of quantum hypothesis testing for partially
View a PDF of the paper titled Performance advantage of quantum hypothesis testing for partially coherent optical sources, by Jian-Dong Zhang and 3 other authors. View PDF Abstract: Determining the presence of a potential optical source in the interest region is important for an imaging system and can be achieved by using hypothesis testing ...
U.S. requires more dairy cows tested for bird flu as viral concerns
An order issued by the U.S. Agriculture Department that takes effect Monday requires every lactating dairy cow to be tested before moving across state lines. Cows carrying the virus would have to ...
Harvey Weinstein hospitalized for testing after return to New York jail
Post. Ex-movie mogul Harvey Weinstein was hospitalized for a bevy of tests after returning to a New York jail shortly after the state's highest court overturned his 2020 rape and sexual assault ...
1 in 5 milk samples from grocery stores test positive for bird flu. Why
On Wednesday, the USDA ordered mandatory bird flu testing for any cattle transferred between states. No bird flu has been detected in California's estimated 1.7 million dairy cows. Two human cases of H5N1 have been confirmed in the United States. The Centers for Disease Control and Prevention (CDC) considers the risk to the general public to ...

What is Hypothesis Testing?

Statistical Hypotheses

Can We Accept the Null Hypothesis?

Hypothesis Tests

Decision Errors

Decision Rules

One-Tailed and Two-Tailed Tests

8.1: The Elements of Hypothesis Testing

Learning Objectives

Types of Hypotheses

Definition: null hypothesis and alternative hypothesis

Definition: statistical procedure

Example \(\PageIndex{1}\)

Example \(\PageIndex{2}\)

The Logic of Hypothesis Testing

The Rejection Region

Definition: critical values

Example \(\PageIndex{3}\)

Definitions: Test classifications

Two Types of Errors

Definition: Type I and Type II errors

Definition: level of significance

Standardizing the Test Statistic

Definition: hypothesis test

Systematic Hypothesis Testing Procedure: Critical Value Approach

Key Takeaway

Module 9: Hypothesis Testing With One Sample

Concept Review

Formula Review

9.1 Null and Alternative Hypotheses

Example 9.1

Example 9.2

Example 9.3

Example 9.4

Collaborative Exercise

Hypothesis to Be Tested: Definition and 4 Steps for Testing with Example

What Is Hypothesis Testing?

Key Takeaways

How Hypothesis Testing Works

4 Steps of Hypothesis Testing

Real-World Example of Hypothesis Testing

What is Hypothesis Testing?

What are the Four Key Steps Involved in Hypothesis Testing?

What are the Benefits of Hypothesis Testing?

What are the Limitations of Hypothesis Testing?

The Bottom Line

How to Write Hypothesis Test Conclusions (With Examples)

Example 1: Reject the Null Hypothesis Conclusion

Example 2: Fail to Reject the Null Hypothesis Conclusion

Additional Resources

Featured Posts

Leave a Reply Cancel reply

User Preferences

Keyboard Shortcuts

Example S.3.1

Example S.3.2

Errors in Hypothesis Testing Section

Making the Decision Section

In Practice

How to Write a Hypothesis? Types and Examples

Table of Contents

What is a hypothesis?

Types of hypotheses

Characteristics of a hypothesis

Functions of a hypothesis

How to write a hypothesis

Hypothesis examples

Frequently asked questions

Related Reads:

Measuring Academic Success: Definition & Strategies for Excellence

1.2: The 7-Step Process of Statistical Hypothesis Testing

Step 1: State the Null Hypothesis

Step 2: State the Alternative Hypothesis

Step 3: Set \(\alpha\)

Step 4: Collect Data

Step 5: Calculate a test statistic

Step 6: Construct Acceptance / Rejection regions

Step 7: Based on steps 5 and 6, draw a conclusion about H0

Quantum Physics

Submission history