quantitative research dissertation example

How To Write The Results/Findings Chapter

For quantitative studies (dissertations & theses).

By: Derek Jansen (MBA). Expert Reviewed By: Kerryn Warren (PhD) | July 2021

So, you’ve completed your quantitative data analysis and it’s time to report on your findings. But where do you start? In this post, we’ll walk you through the results chapter (also called the findings or analysis chapter), step by step, so that you can craft this section of your dissertation or thesis with confidence. If you’re looking for information regarding the results chapter for qualitative studies, you can find that here .

Overview: Quantitative Results Chapter

• What exactly the results/findings/analysis chapter is
• What you need to include in your results chapter
• How to structure your results chapter
• A few tips and tricks for writing top-notch chapter

What exactly is the results chapter?

The results chapter (also referred to as the findings or analysis chapter) is one of the most important chapters of your dissertation or thesis because it shows the reader what you’ve found in terms of the quantitative data you’ve collected. It presents the data using a clear text narrative, supported by tables, graphs and charts. In doing so, it also highlights any potential issues (such as outliers or unusual findings) you’ve come across.

But how’s that different from the discussion chapter?

Well, in the results chapter, you only present your statistical findings. Only the numbers, so to speak – no more, no less. Contrasted to this, in the discussion chapter , you interpret your findings and link them to prior research (i.e. your literature review), as well as your research objectives and research questions . In other words, the results chapter presents and describes the data, while the discussion chapter interprets the data.

Let’s look at an example.

In your results chapter, you may have a plot that shows how respondents to a survey  responded: the numbers of respondents per category, for instance. You may also state whether this supports a hypothesis by using a p-value from a statistical test. But it is only in the discussion chapter where you will say why this is relevant or how it compares with the literature or the broader picture. So, in your results chapter, make sure that you don’t present anything other than the hard facts – this is not the place for subjectivity.

It’s worth mentioning that some universities prefer you to combine the results and discussion chapters. Even so, it is good practice to separate the results and discussion elements within the chapter, as this ensures your findings are fully described. Typically, though, the results and discussion chapters are split up in quantitative studies. If you’re unsure, chat with your research supervisor or chair to find out what their preference is.

What should you include in the results chapter?

Following your analysis, it’s likely you’ll have far more data than are necessary to include in your chapter. In all likelihood, you’ll have a mountain of SPSS or R output data, and it’s your job to decide what’s most relevant. You’ll need to cut through the noise and focus on the data that matters.

This doesn’t mean that those analyses were a waste of time – on the contrary, those analyses ensure that you have a good understanding of your dataset and how to interpret it. However, that doesn’t mean your reader or examiner needs to see the 165 histograms you created! Relevance is key.

How do I decide what’s relevant?

At this point, it can be difficult to strike a balance between what is and isn’t important. But the most important thing is to ensure your results reflect and align with the purpose of your study .  So, you need to revisit your research aims, objectives and research questions and use these as a litmus test for relevance. Make sure that you refer back to these constantly when writing up your chapter so that you stay on track.

As a general guide, your results chapter will typically include the following:

• Some demographic data about your sample
• Reliability tests (if you used measurement scales)
• Descriptive statistics
• Inferential statistics (if your research objectives and questions require these)
• Hypothesis tests (again, if your research objectives and questions require these)

We’ll discuss each of these points in more detail in the next section.

Importantly, your results chapter needs to lay the foundation for your discussion chapter . This means that, in your results chapter, you need to include all the data that you will use as the basis for your interpretation in the discussion chapter.

For example, if you plan to highlight the strong relationship between Variable X and Variable Y in your discussion chapter, you need to present the respective analysis in your results chapter – perhaps a correlation or regression analysis.

Need a helping hand?

How do I write the results chapter?

There are multiple steps involved in writing up the results chapter for your quantitative research. The exact number of steps applicable to you will vary from study to study and will depend on the nature of the research aims, objectives and research questions . However, we’ll outline the generic steps below.

Step 1 – Revisit your research questions

The first step in writing your results chapter is to revisit your research objectives and research questions . These will be (or at least, should be!) the driving force behind your results and discussion chapters, so you need to review them and then ask yourself which statistical analyses and tests (from your mountain of data) would specifically help you address these . For each research objective and research question, list the specific piece (or pieces) of analysis that address it.

At this stage, it’s also useful to think about the key points that you want to raise in your discussion chapter and note these down so that you have a clear reminder of which data points and analyses you want to highlight in the results chapter. Again, list your points and then list the specific piece of analysis that addresses each point. 

Next, you should draw up a rough outline of how you plan to structure your chapter . Which analyses and statistical tests will you present and in what order? We’ll discuss the “standard structure” in more detail later, but it’s worth mentioning now that it’s always useful to draw up a rough outline before you start writing (this advice applies to any chapter).

Step 2 – Craft an overview introduction

As with all chapters in your dissertation or thesis, you should start your quantitative results chapter by providing a brief overview of what you’ll do in the chapter and why . For example, you’d explain that you will start by presenting demographic data to understand the representativeness of the sample, before moving onto X, Y and Z.

This section shouldn’t be lengthy – a paragraph or two maximum. Also, it’s a good idea to weave the research questions into this section so that there’s a golden thread that runs through the document.

Step 3 – Present the sample demographic data

The first set of data that you’ll present is an overview of the sample demographics – in other words, the demographics of your respondents.

For example:

• What age range are they?
• How is gender distributed?
• How is ethnicity distributed?
• What areas do the participants live in?

The purpose of this is to assess how representative the sample is of the broader population. This is important for the sake of the generalisability of the results. If your sample is not representative of the population, you will not be able to generalise your findings. This is not necessarily the end of the world, but it is a limitation you’ll need to acknowledge.

Of course, to make this representativeness assessment, you’ll need to have a clear view of the demographics of the population. So, make sure that you design your survey to capture the correct demographic information that you will compare your sample to.

But what if I’m not interested in generalisability?

Well, even if your purpose is not necessarily to extrapolate your findings to the broader population, understanding your sample will allow you to interpret your findings appropriately, considering who responded. In other words, it will help you contextualise your findings . For example, if 80% of your sample was aged over 65, this may be a significant contextual factor to consider when interpreting the data. Therefore, it’s important to understand and present the demographic data.

 Step 4 – Review composite measures and the data “shape”.

Before you undertake any statistical analysis, you’ll need to do some checks to ensure that your data are suitable for the analysis methods and techniques you plan to use. If you try to analyse data that doesn’t meet the assumptions of a specific statistical technique, your results will be largely meaningless. Therefore, you may need to show that the methods and techniques you’ll use are “allowed”.

Most commonly, there are two areas you need to pay attention to:

#1: Composite measures

The first is when you have multiple scale-based measures that combine to capture one construct – this is called a composite measure .  For example, you may have four Likert scale-based measures that (should) all measure the same thing, but in different ways. In other words, in a survey, these four scales should all receive similar ratings. This is called “ internal consistency ”.

Internal consistency is not guaranteed though (especially if you developed the measures yourself), so you need to assess the reliability of each composite measure using a test. Typically, Cronbach’s Alpha is a common test used to assess internal consistency – i.e., to show that the items you’re combining are more or less saying the same thing. A high alpha score means that your measure is internally consistent. A low alpha score means you may need to consider scrapping one or more of the measures.

#2: Data shape

The second matter that you should address early on in your results chapter is data shape. In other words, you need to assess whether the data in your set are symmetrical (i.e. normally distributed) or not, as this will directly impact what type of analyses you can use. For many common inferential tests such as T-tests or ANOVAs (we’ll discuss these a bit later), your data needs to be normally distributed. If it’s not, you’ll need to adjust your strategy and use alternative tests.

To assess the shape of the data, you’ll usually assess a variety of descriptive statistics (such as the mean, median and skewness), which is what we’ll look at next.

Step 5 – Present the descriptive statistics

Now that you’ve laid the foundation by discussing the representativeness of your sample, as well as the reliability of your measures and the shape of your data, you can get started with the actual statistical analysis. The first step is to present the descriptive statistics for your variables.

For scaled data, this usually includes statistics such as:

• The mean – this is simply the mathematical average of a range of numbers.
• The median – this is the midpoint in a range of numbers when the numbers are arranged in order.
• The mode – this is the most commonly repeated number in the data set.
• Standard deviation – this metric indicates how dispersed a range of numbers is. In other words, how close all the numbers are to the mean (the average).
• Skewness – this indicates how symmetrical a range of numbers is. In other words, do they tend to cluster into a smooth bell curve shape in the middle of the graph (this is called a normal or parametric distribution), or do they lean to the left or right (this is called a non-normal or non-parametric distribution).
• Kurtosis – this metric indicates whether the data are heavily or lightly-tailed, relative to the normal distribution. In other words, how peaked or flat the distribution is.

A large table that indicates all the above for multiple variables can be a very effective way to present your data economically. You can also use colour coding to help make the data more easily digestible.

For categorical data, where you show the percentage of people who chose or fit into a category, for instance, you can either just plain describe the percentages or numbers of people who responded to something or use graphs and charts (such as bar graphs and pie charts) to present your data in this section of the chapter.

When using figures, make sure that you label them simply and clearly , so that your reader can easily understand them. There’s nothing more frustrating than a graph that’s missing axis labels! Keep in mind that although you’ll be presenting charts and graphs, your text content needs to present a clear narrative that can stand on its own. In other words, don’t rely purely on your figures and tables to convey your key points: highlight the crucial trends and values in the text. Figures and tables should complement the writing, not carry it .

Depending on your research aims, objectives and research questions, you may stop your analysis at this point (i.e. descriptive statistics). However, if your study requires inferential statistics, then it’s time to deep dive into those .

Step 6 – Present the inferential statistics

Inferential statistics are used to make generalisations about a population , whereas descriptive statistics focus purely on the sample . Inferential statistical techniques, broadly speaking, can be broken down into two groups .

First, there are those that compare measurements between groups , such as t-tests (which measure differences between two groups) and ANOVAs (which measure differences between multiple groups). Second, there are techniques that assess the relationships between variables , such as correlation analysis and regression analysis. Within each of these, some tests can be used for normally distributed (parametric) data and some tests are designed specifically for use on non-parametric data.

There are a seemingly endless number of tests that you can use to crunch your data, so it’s easy to run down a rabbit hole and end up with piles of test data. Ultimately, the most important thing is to make sure that you adopt the tests and techniques that allow you to achieve your research objectives and answer your research questions .

In this section of the results chapter, you should try to make use of figures and visual components as effectively as possible. For example, if you present a correlation table, use colour coding to highlight the significance of the correlation values, or scatterplots to visually demonstrate what the trend is. The easier you make it for your reader to digest your findings, the more effectively you’ll be able to make your arguments in the next chapter.

Step 7 – Test your hypotheses

If your study requires it, the next stage is hypothesis testing. A hypothesis is a statement , often indicating a difference between groups or relationship between variables, that can be supported or rejected by a statistical test. However, not all studies will involve hypotheses (again, it depends on the research objectives), so don’t feel like you “must” present and test hypotheses just because you’re undertaking quantitative research.

The basic process for hypothesis testing is as follows:

• Specify your null hypothesis (for example, “The chemical psilocybin has no effect on time perception).
• Specify your alternative hypothesis (e.g., “The chemical psilocybin has an effect on time perception)
• Set your significance level (this is usually 0.05)
• Calculate your statistics and find your p-value (e.g., p=0.01)
• Draw your conclusions (e.g., “The chemical psilocybin does have an effect on time perception”)

Finally, if the aim of your study is to develop and test a conceptual framework , this is the time to present it, following the testing of your hypotheses. While you don’t need to develop or discuss these findings further in the results chapter, indicating whether the tests (and their p-values) support or reject the hypotheses is crucial.

Step 8 – Provide a chapter summary

To wrap up your results chapter and transition to the discussion chapter, you should provide a brief summary of the key findings . “Brief” is the keyword here – much like the chapter introduction, this shouldn’t be lengthy – a paragraph or two maximum. Highlight the findings most relevant to your research objectives and research questions, and wrap it up.

Some final thoughts, tips and tricks

Now that you’ve got the essentials down, here are a few tips and tricks to make your quantitative results chapter shine:

• When writing your results chapter, report your findings in the past tense . You’re talking about what you’ve found in your data, not what you are currently looking for or trying to find.
• Structure your results chapter systematically and sequentially . If you had two experiments where findings from the one generated inputs into the other, report on them in order.
• Make your own tables and graphs rather than copying and pasting them from statistical analysis programmes like SPSS. Check out the DataIsBeautiful reddit for some inspiration.
• Once you’re done writing, review your work to make sure that you have provided enough information to answer your research questions , but also that you didn’t include superfluous information.

If you’ve got any questions about writing up the quantitative results chapter, please leave a comment below. If you’d like 1-on-1 assistance with your quantitative analysis and discussion, check out our hands-on coaching service , or book a free consultation with a friendly coach.

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

Thank you. I will try my best to write my results.

Awesome content 👏🏾

this was great explaination

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Dissertations and research projects

• Book a session
• Planning your research
• Qualitative research

Hypothesis testing

Reliability and validity, approaches to quantitative research.

• Writing up your research project
• e-learning and books
• SkillsCheck This link opens in a new window
• ⬅ Back to Skills Centre This link opens in a new window
• Review this resource

Through quantitative research we seek to understand the relationships between variables. A variable will be a characteristic, value, attribute or behaviour that is of interest to the researcher. Some variables can be simple to measure, for example, height and weight. By contrast, others such as self-esteem or socio-economic status are more complex and therefore harder to measure. This is why it is important to operationalise your variables.

This essentially means being very clear about the way in which variables will be defined and measured in your study; this lends credibility to your methodology and helps the replicability of your research. It is important that you are detailed in your operational definition of any given variable because another researcher may define that variable differently from you. To illustrate, if a study examined memory ability, the researcher would specify exactly how this measure was generated: was it the number of words recalled in 60 seconds after reading a passage of text? Was it details about a picture? Defining your variables is an important of the research process as this will affect the reliability and validity of your study.

is the variable changed or manipulated by the researcher. Research generally seeks to establish whether the independent variable has an affect or influences the dependent variable in some way; this may be through a causal or non-causal relationship.

i s the variable that the researcher is trying to predict or explain through understanding its relationship with the independent variable. For example, if a researcher wants to establish if drinking coffee aids sporting performance, your independent variable would be the amount of coffee consumed (no coffee/1 cup/3 cups) and the dependent variable would be some operational definition of sporting performance (amount of weight lifted/vertical jump height/time taken to sprint 100m).

is  a variable that affects the strength of the relationship between the independent and dependent variable. For example, if you looked at the relationship between personality similarity in friendships (independent variable) and perceived friendship satisfaction (dependent variable), it might be that age is a moderating variable – e.g. the older you are, the weaker the relationship between personality similarity in a friendship and associated satisfaction with that friendship. From this you could make the tentative suggestion that similarity in personality becomes less important in a satisfying relationship as we become older. 

i s a variable that helps to explain the relationship between the independent and dependent variables. Consider the example above, we might discover that the number of shared activities also contributes to perceived friendship satisfaction . We could then remove this from our analysis and find that the relationship between personality similarity in friendships and perceived satisfaction in a friendship disappears - this would suggest that the relationship was mediated by the variable shared interests.

is any variable that is not the independent variable but may affect the results of the experiment. Examples can include; aspects of the environment (temperature/noise/lighting); differences between participants (mood/intellect/concentration); and experimenter effects (clues in an experiment which may convey that purpose of the research). It is important to minimise the influence of extraneous variables through the careful use of controls – for example, there are ways of minimising the effect of differences between participants through your experimental design (more on this later!)

• Relationships are Complicated toolkit This short guide offers more information and examples of the types of relationships between variables.

A hypothesis is a predictive statement that can be tested through the collection of data. The data can be analysed and can either provide support for, or help to reject, a hypothesis; this in turn should allow a researcher to draw some conclusions about what they are investigating.

Null and alternative hypotheses

Hypothesis are classified by the way they describe the expected association/difference between variables. When we test our hypothesis/hypotheses it is important to remember we are testing it against the assumption that there isn’t an association/difference between the independent and dependent variables: we call this the null hypothesis. By testing this assumption, statistical tests can estimate how likely it is that any observed association/difference between variables is due to chance.

In addition to the null hypothesis we also have the alternative hypothesis. This hypothesis states that there is an association/difference between groups; this cannot be tested directly but can be accepted by rejecting the null hypothesis. This is achieved through statistical tests that can help to demonstrate that any observed association/differences are not due to chance. Once this is established, we can accept our alternative hypothesis and start to draw conclusions from our data.

Hypotheses can either be one-tailed or two-tailed:

• One-tailed hypothesis –specifies the direction of the predicted association between the independent and dependent variable. For example, the higher an individual’s educational level, the more books they will read in a one-year period.
• Two-tailed hypothesis – does not specify the direction of the predicted association between variables; only that an association exists. For example, there will a be difference in the number of books read in a one-year period, dependent on the level of an individual’s education.

Key things to remember when writing your hypothesis/hypotheses:

• Your hypothesis should always be written as a statement and before any data are collected .
• It should be simple and specific ; include the variables, using concise operational definitions, and the predicted relationship between these variables. If you have several predictor (independent) variables it would be better to write several simple hypotheses – think one predictor and one outcome variable.
• Always keep your language clear and focused .

It is important that you show rigour within your research. This means demonstrating that you have given careful consideration to how you can enhance the quality of your research project. Within quantitative research this is achieved through examining reliability and validity.

• Reliability – is a measure of how consistent, dependable and repeatable something is.
• Validity – is the extent to which research measures the concept that it was designed to measure.

For example, if you had some scales that were always weighed an object as 5kg lighter than it actually is, this would be an example of a measure that was very reliable but not valid : the scales will always give you a consistent measure of weight, but this measure is not accurate.

There are several different types of reliability and validity that you should consider when planning, conducting and writing up your research project. For more information on the different types of reliability and validity have a look at the recommendations below:

• Designing and Doing Survey Research (Andres, 2012) – see Chapter 7 .
• Quantitative Health Research Issues and Methods (Curtis & Drennan, 2013) – see Chapter 16 .
• Research Methods in Psychology (Howitt & Cramer, 2017) – see Chapter 16 .
• Non-experimental
• 'True' experiments
• Quasi-experimental
• Between-subjects
• Within-subjects

Non-experimental research designs do not seek to establish cause and effect relationships. This is because the researcher does not manipulate the independent variable(s) to measure any effects on the dependent variable(s). Instead, researchers may use this type of design to begin exploring a topic where there is little current understanding, or to investigate the relationship between two (or more) variables.

• Descriptive : these research designs help to understand the current state of a phenomenon and are often used when not much is known about a topic. Variables are not controlled, and data tends to be collected through observation or surveys. An example of this might be an investigation into the preferred news sources of 13-18-year olds.
• Correlational :  these designs measure a relationship between two variables that are not controlled. As such, correlational designs cannot establish cause and effect – always remember correlation does not imply causation! This approach can be useful when there is a suspected relationship between variables, but it would be impractical or unethical to manipulate one of those variables. For example, you might hypothesize

True experiments seek to establish cause and effect relationships between a group of variables. Researchers control for all variables except for the variable(s) being manipulated, to establish its effect on the dependent variable.

These are similar to true experiments: the aim is to establish cause and effect relationships. Crucially however, assignment to groups is not random. This type of design is often used when it is not possible for the researcher to randomly assign participants to groups because they are interested in understanding a particular phenomenon in relation to naturally occurring differences between groups – an example of this could be an experiment where a researcher is interested in examining whether the effect of coffee consumption on sleep differs depending on age. In this example, it is impossible for the researcher to manipulate the age of participants, so instead group assignment would be made based on predetermined criteria e.g. under 40, 40+. As this assignment cannot be random this would be a quasi-experiment.

Between-subjects designs involve the assignments of participants to one of two (or more) conditions, with each participant experiencing only that condition. In its simplest form, a between-subjects design requires a control condition and a treatment condition. If the results of an experiment differ greatly between conditions, then it can be assumed that this due to the effect of the intervention or manipulation that has been applied in the treatment condition. To help minimise the affect of extraneous variables that might impact differences between the groups (and increase the likelihood that observed differences are due to the effect of the independent variable), participants in the control and treatment conditions might be matched for relevant characteristics.

For example, in an experiment to assess the effectiveness of two training programmes in improving athletic performance, participants might be matched for some key measures of fitness such as 100m sprint time, maximum squat etc. This would enable researchers to be more confident that any changes to athletic performance in the participants between the two groups were likely due to the training programme they undertook, rather than natural, pre-exiting differences in athletic performance.

Sometimes referred to as repeated measures , this approach involves obtaining more than one measure from each participant in a study. This means that participants take part in both the control and treatment condition(s). The primary advantage of this is that participants act as their own control; you can be more confident that any observed differences result from the treatment condition rather than naturally occurring differences between the groups. One problem, however, is that of order effects (sometimes called practice effects). These effects may occur because conditions are applied one after the other and this can lead to changes in performance that are not the result of the treatment but instead reflect some effect of the previous condition that a participant has experienced. For example, improvements in performance could be due to learning/practise and a decline in performance could be due to fatigue over experiencing two (or more) experimental conditions back-to-back.

One way to account for this problem is to counterbalance the order of your conditions. To do this, a researcher would ensure that each condition in the experiment is experienced 1 st for an equal number of participants:

10 participants experience condition A 1 st and condition B 2 nd 10 participants experience condition B 1 st and condition A 2 nd

Doing this helps to reduce the impact of order effects by ensuring that any effects are distributed evenly across all conditions.

Another option could be to create a long time between testing conditions to reduce any possible effects of learning and/or fatigue. It should be noted however, that creating distance between conditions isn’t always practical and it can be hard to know how long is sufficient to eliminate a potential order effect: this is particularly true for practice effects as it can be hard to accurately determine how long it takes for potential improvements in performance due to learning, to disappear.

The final type of design is used when a research design has one (or more) factors that is between subjects and one (or more) factors that is within subject. This is often used when for research that is looking at the effect on an intervention in relation to another factor that has a fixed effect.

For example, if a researcher was looking at the effectiveness of a drug for treating pain in those under 40 and over 40, age would be a between-subjects factor because a participant can’t be both under and over 40 at the same time. The drug that participants take would be the within-subjects factor. This type of design is particularly useful if you want to examine if the effect on an intervention is different dependent upon another factor. In the example above, it would be possible to establish if the effect of the drug was beneficial for all participants, or whether it was particularly effective/ineffective depending on the age of the participant – whether they were under or over 40. 

• << Previous: Qualitative research
• Next: Writing up your research project >>
• Last Updated: Apr 5, 2024 11:10 AM
• URL: https://libguides.shu.ac.uk/researchprojects

• Study and research support
• Academic skills

Dissertation examples

Listed below are some of the best examples of research projects and dissertations from undergraduate and taught postgraduate students at the University of Leeds We have not been able to gather examples from all schools. The module requirements for research projects may have changed since these examples were written. Refer to your module guidelines to make sure that you address all of the current assessment criteria. Some of the examples below are only available to access on campus.

• Undergraduate examples
• Taught Masters examples

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• J Korean Med Sci
• v.37(16); 2022 Apr 25

A Practical Guide to Writing Quantitative and Qualitative Research Questions and Hypotheses in Scholarly Articles

Edward barroga.

1 Department of General Education, Graduate School of Nursing Science, St. Luke’s International University, Tokyo, Japan.

Glafera Janet Matanguihan

2 Department of Biological Sciences, Messiah University, Mechanicsburg, PA, USA.

The development of research questions and the subsequent hypotheses are prerequisites to defining the main research purpose and specific objectives of a study. Consequently, these objectives determine the study design and research outcome. The development of research questions is a process based on knowledge of current trends, cutting-edge studies, and technological advances in the research field. Excellent research questions are focused and require a comprehensive literature search and in-depth understanding of the problem being investigated. Initially, research questions may be written as descriptive questions which could be developed into inferential questions. These questions must be specific and concise to provide a clear foundation for developing hypotheses. Hypotheses are more formal predictions about the research outcomes. These specify the possible results that may or may not be expected regarding the relationship between groups. Thus, research questions and hypotheses clarify the main purpose and specific objectives of the study, which in turn dictate the design of the study, its direction, and outcome. Studies developed from good research questions and hypotheses will have trustworthy outcomes with wide-ranging social and health implications.

INTRODUCTION

Scientific research is usually initiated by posing evidenced-based research questions which are then explicitly restated as hypotheses. 1 , 2 The hypotheses provide directions to guide the study, solutions, explanations, and expected results. 3 , 4 Both research questions and hypotheses are essentially formulated based on conventional theories and real-world processes, which allow the inception of novel studies and the ethical testing of ideas. 5 , 6

It is crucial to have knowledge of both quantitative and qualitative research 2 as both types of research involve writing research questions and hypotheses. 7 However, these crucial elements of research are sometimes overlooked; if not overlooked, then framed without the forethought and meticulous attention it needs. Planning and careful consideration are needed when developing quantitative or qualitative research, particularly when conceptualizing research questions and hypotheses. 4

There is a continuing need to support researchers in the creation of innovative research questions and hypotheses, as well as for journal articles that carefully review these elements. 1 When research questions and hypotheses are not carefully thought of, unethical studies and poor outcomes usually ensue. Carefully formulated research questions and hypotheses define well-founded objectives, which in turn determine the appropriate design, course, and outcome of the study. This article then aims to discuss in detail the various aspects of crafting research questions and hypotheses, with the goal of guiding researchers as they develop their own. Examples from the authors and peer-reviewed scientific articles in the healthcare field are provided to illustrate key points.

DEFINITIONS AND RELATIONSHIP OF RESEARCH QUESTIONS AND HYPOTHESES

A research question is what a study aims to answer after data analysis and interpretation. The answer is written in length in the discussion section of the paper. Thus, the research question gives a preview of the different parts and variables of the study meant to address the problem posed in the research question. 1 An excellent research question clarifies the research writing while facilitating understanding of the research topic, objective, scope, and limitations of the study. 5

On the other hand, a research hypothesis is an educated statement of an expected outcome. This statement is based on background research and current knowledge. 8 , 9 The research hypothesis makes a specific prediction about a new phenomenon 10 or a formal statement on the expected relationship between an independent variable and a dependent variable. 3 , 11 It provides a tentative answer to the research question to be tested or explored. 4

Hypotheses employ reasoning to predict a theory-based outcome. 10 These can also be developed from theories by focusing on components of theories that have not yet been observed. 10 The validity of hypotheses is often based on the testability of the prediction made in a reproducible experiment. 8

Conversely, hypotheses can also be rephrased as research questions. Several hypotheses based on existing theories and knowledge may be needed to answer a research question. Developing ethical research questions and hypotheses creates a research design that has logical relationships among variables. These relationships serve as a solid foundation for the conduct of the study. 4 , 11 Haphazardly constructed research questions can result in poorly formulated hypotheses and improper study designs, leading to unreliable results. Thus, the formulations of relevant research questions and verifiable hypotheses are crucial when beginning research. 12

CHARACTERISTICS OF GOOD RESEARCH QUESTIONS AND HYPOTHESES

Excellent research questions are specific and focused. These integrate collective data and observations to confirm or refute the subsequent hypotheses. Well-constructed hypotheses are based on previous reports and verify the research context. These are realistic, in-depth, sufficiently complex, and reproducible. More importantly, these hypotheses can be addressed and tested. 13

There are several characteristics of well-developed hypotheses. Good hypotheses are 1) empirically testable 7 , 10 , 11 , 13 ; 2) backed by preliminary evidence 9 ; 3) testable by ethical research 7 , 9 ; 4) based on original ideas 9 ; 5) have evidenced-based logical reasoning 10 ; and 6) can be predicted. 11 Good hypotheses can infer ethical and positive implications, indicating the presence of a relationship or effect relevant to the research theme. 7 , 11 These are initially developed from a general theory and branch into specific hypotheses by deductive reasoning. In the absence of a theory to base the hypotheses, inductive reasoning based on specific observations or findings form more general hypotheses. 10

TYPES OF RESEARCH QUESTIONS AND HYPOTHESES

Research questions and hypotheses are developed according to the type of research, which can be broadly classified into quantitative and qualitative research. We provide a summary of the types of research questions and hypotheses under quantitative and qualitative research categories in Table 1 .

Research questions in quantitative research

In quantitative research, research questions inquire about the relationships among variables being investigated and are usually framed at the start of the study. These are precise and typically linked to the subject population, dependent and independent variables, and research design. 1 Research questions may also attempt to describe the behavior of a population in relation to one or more variables, or describe the characteristics of variables to be measured ( descriptive research questions ). 1 , 5 , 14 These questions may also aim to discover differences between groups within the context of an outcome variable ( comparative research questions ), 1 , 5 , 14 or elucidate trends and interactions among variables ( relationship research questions ). 1 , 5 We provide examples of descriptive, comparative, and relationship research questions in quantitative research in Table 2 .

Hypotheses in quantitative research

In quantitative research, hypotheses predict the expected relationships among variables. 15 Relationships among variables that can be predicted include 1) between a single dependent variable and a single independent variable ( simple hypothesis ) or 2) between two or more independent and dependent variables ( complex hypothesis ). 4 , 11 Hypotheses may also specify the expected direction to be followed and imply an intellectual commitment to a particular outcome ( directional hypothesis ) 4 . On the other hand, hypotheses may not predict the exact direction and are used in the absence of a theory, or when findings contradict previous studies ( non-directional hypothesis ). 4 In addition, hypotheses can 1) define interdependency between variables ( associative hypothesis ), 4 2) propose an effect on the dependent variable from manipulation of the independent variable ( causal hypothesis ), 4 3) state a negative relationship between two variables ( null hypothesis ), 4 , 11 , 15 4) replace the working hypothesis if rejected ( alternative hypothesis ), 15 explain the relationship of phenomena to possibly generate a theory ( working hypothesis ), 11 5) involve quantifiable variables that can be tested statistically ( statistical hypothesis ), 11 6) or express a relationship whose interlinks can be verified logically ( logical hypothesis ). 11 We provide examples of simple, complex, directional, non-directional, associative, causal, null, alternative, working, statistical, and logical hypotheses in quantitative research, as well as the definition of quantitative hypothesis-testing research in Table 3 .

Research questions in qualitative research

Unlike research questions in quantitative research, research questions in qualitative research are usually continuously reviewed and reformulated. The central question and associated subquestions are stated more than the hypotheses. 15 The central question broadly explores a complex set of factors surrounding the central phenomenon, aiming to present the varied perspectives of participants. 15

There are varied goals for which qualitative research questions are developed. These questions can function in several ways, such as to 1) identify and describe existing conditions ( contextual research question s); 2) describe a phenomenon ( descriptive research questions ); 3) assess the effectiveness of existing methods, protocols, theories, or procedures ( evaluation research questions ); 4) examine a phenomenon or analyze the reasons or relationships between subjects or phenomena ( explanatory research questions ); or 5) focus on unknown aspects of a particular topic ( exploratory research questions ). 5 In addition, some qualitative research questions provide new ideas for the development of theories and actions ( generative research questions ) or advance specific ideologies of a position ( ideological research questions ). 1 Other qualitative research questions may build on a body of existing literature and become working guidelines ( ethnographic research questions ). Research questions may also be broadly stated without specific reference to the existing literature or a typology of questions ( phenomenological research questions ), may be directed towards generating a theory of some process ( grounded theory questions ), or may address a description of the case and the emerging themes ( qualitative case study questions ). 15 We provide examples of contextual, descriptive, evaluation, explanatory, exploratory, generative, ideological, ethnographic, phenomenological, grounded theory, and qualitative case study research questions in qualitative research in Table 4 , and the definition of qualitative hypothesis-generating research in Table 5 .

Qualitative studies usually pose at least one central research question and several subquestions starting with How or What . These research questions use exploratory verbs such as explore or describe . These also focus on one central phenomenon of interest, and may mention the participants and research site. 15

Hypotheses in qualitative research

Hypotheses in qualitative research are stated in the form of a clear statement concerning the problem to be investigated. Unlike in quantitative research where hypotheses are usually developed to be tested, qualitative research can lead to both hypothesis-testing and hypothesis-generating outcomes. 2 When studies require both quantitative and qualitative research questions, this suggests an integrative process between both research methods wherein a single mixed-methods research question can be developed. 1

FRAMEWORKS FOR DEVELOPING RESEARCH QUESTIONS AND HYPOTHESES

Research questions followed by hypotheses should be developed before the start of the study. 1 , 12 , 14 It is crucial to develop feasible research questions on a topic that is interesting to both the researcher and the scientific community. This can be achieved by a meticulous review of previous and current studies to establish a novel topic. Specific areas are subsequently focused on to generate ethical research questions. The relevance of the research questions is evaluated in terms of clarity of the resulting data, specificity of the methodology, objectivity of the outcome, depth of the research, and impact of the study. 1 , 5 These aspects constitute the FINER criteria (i.e., Feasible, Interesting, Novel, Ethical, and Relevant). 1 Clarity and effectiveness are achieved if research questions meet the FINER criteria. In addition to the FINER criteria, Ratan et al. described focus, complexity, novelty, feasibility, and measurability for evaluating the effectiveness of research questions. 14

The PICOT and PEO frameworks are also used when developing research questions. 1 The following elements are addressed in these frameworks, PICOT: P-population/patients/problem, I-intervention or indicator being studied, C-comparison group, O-outcome of interest, and T-timeframe of the study; PEO: P-population being studied, E-exposure to preexisting conditions, and O-outcome of interest. 1 Research questions are also considered good if these meet the “FINERMAPS” framework: Feasible, Interesting, Novel, Ethical, Relevant, Manageable, Appropriate, Potential value/publishable, and Systematic. 14

As we indicated earlier, research questions and hypotheses that are not carefully formulated result in unethical studies or poor outcomes. To illustrate this, we provide some examples of ambiguous research question and hypotheses that result in unclear and weak research objectives in quantitative research ( Table 6 ) 16 and qualitative research ( Table 7 ) 17 , and how to transform these ambiguous research question(s) and hypothesis(es) into clear and good statements.

a These statements were composed for comparison and illustrative purposes only.

b These statements are direct quotes from Higashihara and Horiuchi. 16

a This statement is a direct quote from Shimoda et al. 17

The other statements were composed for comparison and illustrative purposes only.

CONSTRUCTING RESEARCH QUESTIONS AND HYPOTHESES

To construct effective research questions and hypotheses, it is very important to 1) clarify the background and 2) identify the research problem at the outset of the research, within a specific timeframe. 9 Then, 3) review or conduct preliminary research to collect all available knowledge about the possible research questions by studying theories and previous studies. 18 Afterwards, 4) construct research questions to investigate the research problem. Identify variables to be accessed from the research questions 4 and make operational definitions of constructs from the research problem and questions. Thereafter, 5) construct specific deductive or inductive predictions in the form of hypotheses. 4 Finally, 6) state the study aims . This general flow for constructing effective research questions and hypotheses prior to conducting research is shown in Fig. 1 .

Research questions are used more frequently in qualitative research than objectives or hypotheses. 3 These questions seek to discover, understand, explore or describe experiences by asking “What” or “How.” The questions are open-ended to elicit a description rather than to relate variables or compare groups. The questions are continually reviewed, reformulated, and changed during the qualitative study. 3 Research questions are also used more frequently in survey projects than hypotheses in experiments in quantitative research to compare variables and their relationships.

Hypotheses are constructed based on the variables identified and as an if-then statement, following the template, ‘If a specific action is taken, then a certain outcome is expected.’ At this stage, some ideas regarding expectations from the research to be conducted must be drawn. 18 Then, the variables to be manipulated (independent) and influenced (dependent) are defined. 4 Thereafter, the hypothesis is stated and refined, and reproducible data tailored to the hypothesis are identified, collected, and analyzed. 4 The hypotheses must be testable and specific, 18 and should describe the variables and their relationships, the specific group being studied, and the predicted research outcome. 18 Hypotheses construction involves a testable proposition to be deduced from theory, and independent and dependent variables to be separated and measured separately. 3 Therefore, good hypotheses must be based on good research questions constructed at the start of a study or trial. 12

In summary, research questions are constructed after establishing the background of the study. Hypotheses are then developed based on the research questions. Thus, it is crucial to have excellent research questions to generate superior hypotheses. In turn, these would determine the research objectives and the design of the study, and ultimately, the outcome of the research. 12 Algorithms for building research questions and hypotheses are shown in Fig. 2 for quantitative research and in Fig. 3 for qualitative research.

EXAMPLES OF RESEARCH QUESTIONS FROM PUBLISHED ARTICLES

• EXAMPLE 1. Descriptive research question (quantitative research)
• - Presents research variables to be assessed (distinct phenotypes and subphenotypes)
• “BACKGROUND: Since COVID-19 was identified, its clinical and biological heterogeneity has been recognized. Identifying COVID-19 phenotypes might help guide basic, clinical, and translational research efforts.
• RESEARCH QUESTION: Does the clinical spectrum of patients with COVID-19 contain distinct phenotypes and subphenotypes? ” 19
• EXAMPLE 2. Relationship research question (quantitative research)
• - Shows interactions between dependent variable (static postural control) and independent variable (peripheral visual field loss)
• “Background: Integration of visual, vestibular, and proprioceptive sensations contributes to postural control. People with peripheral visual field loss have serious postural instability. However, the directional specificity of postural stability and sensory reweighting caused by gradual peripheral visual field loss remain unclear.
• Research question: What are the effects of peripheral visual field loss on static postural control ?” 20
• EXAMPLE 3. Comparative research question (quantitative research)
• - Clarifies the difference among groups with an outcome variable (patients enrolled in COMPERA with moderate PH or severe PH in COPD) and another group without the outcome variable (patients with idiopathic pulmonary arterial hypertension (IPAH))
• “BACKGROUND: Pulmonary hypertension (PH) in COPD is a poorly investigated clinical condition.
• RESEARCH QUESTION: Which factors determine the outcome of PH in COPD?
• STUDY DESIGN AND METHODS: We analyzed the characteristics and outcome of patients enrolled in the Comparative, Prospective Registry of Newly Initiated Therapies for Pulmonary Hypertension (COMPERA) with moderate or severe PH in COPD as defined during the 6th PH World Symposium who received medical therapy for PH and compared them with patients with idiopathic pulmonary arterial hypertension (IPAH) .” 21
• EXAMPLE 4. Exploratory research question (qualitative research)
• - Explores areas that have not been fully investigated (perspectives of families and children who receive care in clinic-based child obesity treatment) to have a deeper understanding of the research problem
• “Problem: Interventions for children with obesity lead to only modest improvements in BMI and long-term outcomes, and data are limited on the perspectives of families of children with obesity in clinic-based treatment. This scoping review seeks to answer the question: What is known about the perspectives of families and children who receive care in clinic-based child obesity treatment? This review aims to explore the scope of perspectives reported by families of children with obesity who have received individualized outpatient clinic-based obesity treatment.” 22
• EXAMPLE 5. Relationship research question (quantitative research)
• - Defines interactions between dependent variable (use of ankle strategies) and independent variable (changes in muscle tone)
• “Background: To maintain an upright standing posture against external disturbances, the human body mainly employs two types of postural control strategies: “ankle strategy” and “hip strategy.” While it has been reported that the magnitude of the disturbance alters the use of postural control strategies, it has not been elucidated how the level of muscle tone, one of the crucial parameters of bodily function, determines the use of each strategy. We have previously confirmed using forward dynamics simulations of human musculoskeletal models that an increased muscle tone promotes the use of ankle strategies. The objective of the present study was to experimentally evaluate a hypothesis: an increased muscle tone promotes the use of ankle strategies. Research question: Do changes in the muscle tone affect the use of ankle strategies ?” 23

EXAMPLES OF HYPOTHESES IN PUBLISHED ARTICLES

• EXAMPLE 1. Working hypothesis (quantitative research)
• - A hypothesis that is initially accepted for further research to produce a feasible theory
• “As fever may have benefit in shortening the duration of viral illness, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response when taken during the early stages of COVID-19 illness .” 24
• “In conclusion, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response . The difference in perceived safety of these agents in COVID-19 illness could be related to the more potent efficacy to reduce fever with ibuprofen compared to acetaminophen. Compelling data on the benefit of fever warrant further research and review to determine when to treat or withhold ibuprofen for early stage fever for COVID-19 and other related viral illnesses .” 24
• EXAMPLE 2. Exploratory hypothesis (qualitative research)
• - Explores particular areas deeper to clarify subjective experience and develop a formal hypothesis potentially testable in a future quantitative approach
• “We hypothesized that when thinking about a past experience of help-seeking, a self distancing prompt would cause increased help-seeking intentions and more favorable help-seeking outcome expectations .” 25
• “Conclusion
• Although a priori hypotheses were not supported, further research is warranted as results indicate the potential for using self-distancing approaches to increasing help-seeking among some people with depressive symptomatology.” 25
• EXAMPLE 3. Hypothesis-generating research to establish a framework for hypothesis testing (qualitative research)
• “We hypothesize that compassionate care is beneficial for patients (better outcomes), healthcare systems and payers (lower costs), and healthcare providers (lower burnout). ” 26
• Compassionomics is the branch of knowledge and scientific study of the effects of compassionate healthcare. Our main hypotheses are that compassionate healthcare is beneficial for (1) patients, by improving clinical outcomes, (2) healthcare systems and payers, by supporting financial sustainability, and (3) HCPs, by lowering burnout and promoting resilience and well-being. The purpose of this paper is to establish a scientific framework for testing the hypotheses above . If these hypotheses are confirmed through rigorous research, compassionomics will belong in the science of evidence-based medicine, with major implications for all healthcare domains.” 26
• EXAMPLE 4. Statistical hypothesis (quantitative research)
• - An assumption is made about the relationship among several population characteristics ( gender differences in sociodemographic and clinical characteristics of adults with ADHD ). Validity is tested by statistical experiment or analysis ( chi-square test, Students t-test, and logistic regression analysis)
• “Our research investigated gender differences in sociodemographic and clinical characteristics of adults with ADHD in a Japanese clinical sample. Due to unique Japanese cultural ideals and expectations of women's behavior that are in opposition to ADHD symptoms, we hypothesized that women with ADHD experience more difficulties and present more dysfunctions than men . We tested the following hypotheses: first, women with ADHD have more comorbidities than men with ADHD; second, women with ADHD experience more social hardships than men, such as having less full-time employment and being more likely to be divorced.” 27
• “Statistical Analysis
• ( text omitted ) Between-gender comparisons were made using the chi-squared test for categorical variables and Students t-test for continuous variables…( text omitted ). A logistic regression analysis was performed for employment status, marital status, and comorbidity to evaluate the independent effects of gender on these dependent variables.” 27

EXAMPLES OF HYPOTHESIS AS WRITTEN IN PUBLISHED ARTICLES IN RELATION TO OTHER PARTS

• EXAMPLE 1. Background, hypotheses, and aims are provided
• “Pregnant women need skilled care during pregnancy and childbirth, but that skilled care is often delayed in some countries …( text omitted ). The focused antenatal care (FANC) model of WHO recommends that nurses provide information or counseling to all pregnant women …( text omitted ). Job aids are visual support materials that provide the right kind of information using graphics and words in a simple and yet effective manner. When nurses are not highly trained or have many work details to attend to, these job aids can serve as a content reminder for the nurses and can be used for educating their patients (Jennings, Yebadokpo, Affo, & Agbogbe, 2010) ( text omitted ). Importantly, additional evidence is needed to confirm how job aids can further improve the quality of ANC counseling by health workers in maternal care …( text omitted )” 28
• “ This has led us to hypothesize that the quality of ANC counseling would be better if supported by job aids. Consequently, a better quality of ANC counseling is expected to produce higher levels of awareness concerning the danger signs of pregnancy and a more favorable impression of the caring behavior of nurses .” 28
• “This study aimed to examine the differences in the responses of pregnant women to a job aid-supported intervention during ANC visit in terms of 1) their understanding of the danger signs of pregnancy and 2) their impression of the caring behaviors of nurses to pregnant women in rural Tanzania.” 28
• EXAMPLE 2. Background, hypotheses, and aims are provided
• “We conducted a two-arm randomized controlled trial (RCT) to evaluate and compare changes in salivary cortisol and oxytocin levels of first-time pregnant women between experimental and control groups. The women in the experimental group touched and held an infant for 30 min (experimental intervention protocol), whereas those in the control group watched a DVD movie of an infant (control intervention protocol). The primary outcome was salivary cortisol level and the secondary outcome was salivary oxytocin level.” 29
• “ We hypothesize that at 30 min after touching and holding an infant, the salivary cortisol level will significantly decrease and the salivary oxytocin level will increase in the experimental group compared with the control group .” 29
• EXAMPLE 3. Background, aim, and hypothesis are provided
• “In countries where the maternal mortality ratio remains high, antenatal education to increase Birth Preparedness and Complication Readiness (BPCR) is considered one of the top priorities [1]. BPCR includes birth plans during the antenatal period, such as the birthplace, birth attendant, transportation, health facility for complications, expenses, and birth materials, as well as family coordination to achieve such birth plans. In Tanzania, although increasing, only about half of all pregnant women attend an antenatal clinic more than four times [4]. Moreover, the information provided during antenatal care (ANC) is insufficient. In the resource-poor settings, antenatal group education is a potential approach because of the limited time for individual counseling at antenatal clinics.” 30
• “This study aimed to evaluate an antenatal group education program among pregnant women and their families with respect to birth-preparedness and maternal and infant outcomes in rural villages of Tanzania.” 30
• “ The study hypothesis was if Tanzanian pregnant women and their families received a family-oriented antenatal group education, they would (1) have a higher level of BPCR, (2) attend antenatal clinic four or more times, (3) give birth in a health facility, (4) have less complications of women at birth, and (5) have less complications and deaths of infants than those who did not receive the education .” 30

Research questions and hypotheses are crucial components to any type of research, whether quantitative or qualitative. These questions should be developed at the very beginning of the study. Excellent research questions lead to superior hypotheses, which, like a compass, set the direction of research, and can often determine the successful conduct of the study. Many research studies have floundered because the development of research questions and subsequent hypotheses was not given the thought and meticulous attention needed. The development of research questions and hypotheses is an iterative process based on extensive knowledge of the literature and insightful grasp of the knowledge gap. Focused, concise, and specific research questions provide a strong foundation for constructing hypotheses which serve as formal predictions about the research outcomes. Research questions and hypotheses are crucial elements of research that should not be overlooked. They should be carefully thought of and constructed when planning research. This avoids unethical studies and poor outcomes by defining well-founded objectives that determine the design, course, and outcome of the study.

Disclosure: The authors have no potential conflicts of interest to disclose.

Author Contributions:

• Conceptualization: Barroga E, Matanguihan GJ.
• Methodology: Barroga E, Matanguihan GJ.
• Writing - original draft: Barroga E, Matanguihan GJ.
• Writing - review & editing: Barroga E, Matanguihan GJ.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write a Results Section | Tips & Examples

How to Write a Results Section | Tips & Examples

Published on August 30, 2022 by Tegan George . Revised on July 18, 2023.

A results section is where you report the main findings of the data collection and analysis you conducted for your thesis or dissertation . You should report all relevant results concisely and objectively, in a logical order. Don’t include subjective interpretations of why you found these results or what they mean—any evaluation should be saved for the discussion section .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

How to write a results section, reporting quantitative research results, reporting qualitative research results, results vs. discussion vs. conclusion, checklist: research results, other interesting articles, frequently asked questions about results sections.

When conducting research, it’s important to report the results of your study prior to discussing your interpretations of it. This gives your reader a clear idea of exactly what you found and keeps the data itself separate from your subjective analysis.

Here are a few best practices:

• Your results should always be written in the past tense.
• While the length of this section depends on how much data you collected and analyzed, it should be written as concisely as possible.
• Only include results that are directly relevant to answering your research questions . Avoid speculative or interpretative words like “appears” or “implies.”
• If you have other results you’d like to include, consider adding them to an appendix or footnotes.
• Always start out with your broadest results first, and then flow into your more granular (but still relevant) ones. Think of it like a shoe store: first discuss the shoes as a whole, then the sneakers, boots, sandals, etc.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

If you conducted quantitative research , you’ll likely be working with the results of some sort of statistical analysis .

Your results section should report the results of any statistical tests you used to compare groups or assess relationships between variables . It should also state whether or not each hypothesis was supported.

The most logical way to structure quantitative results is to frame them around your research questions or hypotheses. For each question or hypothesis, share:

• A reminder of the type of analysis you used (e.g., a two-sample t test or simple linear regression ). A more detailed description of your analysis should go in your methodology section.
• A concise summary of each relevant result, both positive and negative. This can include any relevant descriptive statistics (e.g., means and standard deviations ) as well as inferential statistics (e.g., t scores, degrees of freedom , and p values ). Remember, these numbers are often placed in parentheses.
• A brief statement of how each result relates to the question, or whether the hypothesis was supported. You can briefly mention any results that didn’t fit with your expectations and assumptions, but save any speculation on their meaning or consequences for your discussion  and conclusion.

A note on tables and figures

In quantitative research, it’s often helpful to include visual elements such as graphs, charts, and tables , but only if they are directly relevant to your results. Give these elements clear, descriptive titles and labels so that your reader can easily understand what is being shown. If you want to include any other visual elements that are more tangential in nature, consider adding a figure and table list .

As a rule of thumb:

• Tables are used to communicate exact values, giving a concise overview of various results
• Graphs and charts are used to visualize trends and relationships, giving an at-a-glance illustration of key findings

Don’t forget to also mention any tables and figures you used within the text of your results section. Summarize or elaborate on specific aspects you think your reader should know about rather than merely restating the same numbers already shown.

A two-sample t test was used to test the hypothesis that higher social distance from environmental problems would reduce the intent to donate to environmental organizations, with donation intention (recorded as a score from 1 to 10) as the outcome variable and social distance (categorized as either a low or high level of social distance) as the predictor variable.Social distance was found to be positively correlated with donation intention, t (98) = 12.19, p < .001, with the donation intention of the high social distance group 0.28 points higher, on average, than the low social distance group (see figure 1). This contradicts the initial hypothesis that social distance would decrease donation intention, and in fact suggests a small effect in the opposite direction.

Figure 1: Intention to donate to environmental organizations based on social distance from impact of environmental damage.

In qualitative research , your results might not all be directly related to specific hypotheses. In this case, you can structure your results section around key themes or topics that emerged from your analysis of the data.

For each theme, start with general observations about what the data showed. You can mention:

• Recurring points of agreement or disagreement
• Patterns and trends
• Particularly significant snippets from individual responses

Next, clarify and support these points with direct quotations. Be sure to report any relevant demographic information about participants. Further information (such as full transcripts , if appropriate) can be included in an appendix .

When asked about video games as a form of art, the respondents tended to believe that video games themselves are not an art form, but agreed that creativity is involved in their production. The criteria used to identify artistic video games included design, story, music, and creative teams.One respondent (male, 24) noted a difference in creativity between popular video game genres:

“I think that in role-playing games, there’s more attention to character design, to world design, because the whole story is important and more attention is paid to certain game elements […] so that perhaps you do need bigger teams of creative experts than in an average shooter or something.”

Responses suggest that video game consumers consider some types of games to have more artistic potential than others.

Your results section should objectively report your findings, presenting only brief observations in relation to each question, hypothesis, or theme.

It should not  speculate about the meaning of the results or attempt to answer your main research question . Detailed interpretation of your results is more suitable for your discussion section , while synthesis of your results into an overall answer to your main research question is best left for your conclusion .

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

I have completed my data collection and analyzed the results.

I have included all results that are relevant to my research questions.

I have concisely and objectively reported each result, including relevant descriptive statistics and inferential statistics .

I have stated whether each hypothesis was supported or refuted.

I have used tables and figures to illustrate my results where appropriate.

All tables and figures are correctly labelled and referred to in the text.

There is no subjective interpretation or speculation on the meaning of the results.

You've finished writing up your results! Use the other checklists to further improve your thesis.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). How to Write a Results Section | Tips & Examples. Scribbr. Retrieved April 9, 2024, from https://www.scribbr.com/dissertation/results/

Is this article helpful?

Tegan George

Other students also liked, what is a research methodology | steps & tips, how to write a discussion section | tips & examples, how to write a thesis or dissertation conclusion, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Cookies & Privacy
• GETTING STARTED
• Introduction
• FUNDAMENTALS
• Acknowledgements
• Research questions & hypotheses
• Concepts, constructs & variables
• Research limitations
• Getting started
• Sampling Strategy
• Research Quality
• Research Ethics
• Data Analysis

How to structure quantitative research questions

There is no "one best way" to structure a quantitative research question. However, to create a well-structured quantitative research question, we recommend an approach that is based on four steps : (1) Choosing the type of quantitative research question you are trying to create (i.e., descriptive, comparative or relationship-based); (2) Identifying the different types of variables you are trying to measure, manipulate and/or control, as well as any groups you may be interested in; (3) Selecting the appropriate structure for the chosen type of quantitative research question, based on the variables and/or groups involved; and (4) Writing out the problem or issues you are trying to address in the form of a complete research question. In this article, we discuss each of these four steps , as well as providing examples for the three types of quantitative research question you may want to create: descriptive , comparative and relationship-based research questions .

• STEP ONE: Choose the type of quantitative research question (i.e., descriptive, comparative or relationship) you are trying to create
• STEP TWO: Identify the different types of variable you are trying to measure, manipulate and/or control, as well as any groups you may be interested in
• STEP THREE: Select the appropriate structure for the chosen type of quantitative research question, based on the variables and/or groups involved
• STEP FOUR: Write out the problem or issues you are trying to address in the form of a complete research question

STEP ONE Choose the type of quantitative research question (i.e., descriptive, comparative or relationship) you are trying to create

The type of quantitative research question that you use in your dissertation (i.e., descriptive , comparative and/or relationship-based ) needs to be reflected in the way that you write out the research question; that is, the word choice and phrasing that you use when constructing a research question tells the reader whether it is a descriptive, comparative or relationship-based research question. Therefore, in order to know how to structure your quantitative research question, you need to start by selecting the type of quantitative research question you are trying to create: descriptive, comparative and/or relationship-based.

STEP TWO Identify the different types of variable you are trying to measure, manipulate and/or control, as well as any groups you may be interested in

Whether you are trying to create a descriptive, comparative or relationship-based research question, you will need to identify the different types of variable that you are trying to measure , manipulate and/or control . If you are unfamiliar with the different types of variable that may be part of your study, the article, Types of variable , should get you up to speed. It explains the two main types of variables: categorical variables (i.e., nominal , dichotomous and ordinal variables) and continuous variables (i.e., interval and ratio variables). It also explains the difference between independent and dependent variables , which you need to understand to create quantitative research questions.

To provide a brief explanation; a variable is not only something that you measure , but also something that you can manipulate and control for. In most undergraduate and master's level dissertations, you are only likely to measure and manipulate variables. You are unlikely to carry out research that requires you to control for variables, although some supervisors will expect this additional level of complexity. If you plan to only create descriptive research questions , you may simply have a number of dependent variables that you need to measure. However, where you plan to create comparative and/or relationship-based research questions , you will deal with both dependent and independent variables . An independent variable (sometimes called an experimental or predictor variable ) is a variable that is being manipulated in an experiment in order to observe the effect this has on a dependent variable (sometimes called an outcome variable ). For example, if we were interested in investigating the relationship between gender and attitudes towards music piracy amongst adolescents , the independent variable would be gender and the dependent variable attitudes towards music piracy . This example also highlights the need to identify the group(s) you are interested in. In this example, the group of interest are adolescents .

Once you identifying the different types of variable you are trying to measure, manipulate and/or control, as well as any groups you may be interested in, it is possible to start thinking about the way that the three types of quantitative research question can be structured . This is discussed next.

STEP THREE Select the appropriate structure for the chosen type of quantitative research question, based on the variables and/or groups involved

The structure of the three types of quantitative research question differs, reflecting the goals of the question, the types of variables, and the number of variables and groups involved. By structure , we mean the components of a research question (i.e., the types of variables, groups of interest), the number of these different components (i.e., how many variables and groups are being investigated), and the order that these should be presented (e.g., independent variables before dependent variables). The appropriate structure for each of these quantitative research questions is set out below:

Structure of descriptive research questions

• Structure of comparative research questions
• Structure of relationship-based research questions

There are six steps required to construct a descriptive research question: (1) choose your starting phrase; (2) identify and name the dependent variable; (3) identify the group(s) you are interested in; (4) decide whether dependent variable or group(s) should be included first, last or in two parts; (5) include any words that provide greater context to your question; and (6) write out the descriptive research question. Each of these steps is discussed in turn:

Choose your starting phrase

Identify and name the dependent variable

Identify the group(s) you are interested in

Decide whether the dependent variable or group(s) should be included first, last or in two parts

Include any words that provide greater context to your question

Write out the descriptive research question

FIRST Choose your starting phrase

You can start descriptive research questions with any of the following phrases:

How many? How often? How frequently? How much? What percentage? What proportion? To what extent? What is? What are?

Some of these starting phrases are highlighted in blue text in the examples below:

How many calories do American men and women consume per day?

How often do British university students use Facebook each week?

What are the most important factors that influence the career choices of Australian university students?

What proportion of British male and female university students use the top 5 social networks?

What percentage of American men and women exceed their daily calorific allowance?

SECOND Identify and name the dependent variable

All descriptive research questions have a dependent variable. You need to identify what this is. However, how the dependent variable is written out in a research question and what you call it are often two different things. In the examples below, we have illustrated the name of the dependent variable and highlighted how it would be written out in the blue text .

The first two examples highlight that while the name of the dependent variable is the same, namely daily calorific intake , the way that this dependent variable is written out differs in each case.

THIRD Identify the group(s) you are interested in

All descriptive research questions have at least one group , but can have multiple groups . You need to identify this group(s). In the examples below, we have identified the group(s) in the green text .

What are the most important factors that influence the career choices of Australian university students ?

The examples illustrate the difference between the use of a single group (e.g., British university students ) and multiple groups (e.g., American men and women ).

FOURTH Decide whether the dependent variable or group(s) should be included first, last or in two parts

Sometimes it makes more sense for the dependent variable to appear before the group(s) you are interested in, but sometimes it is the opposite way around. The following examples illustrate this, with the group(s) in green text and the dependent variable in blue text :

Group 1st; dependent variable 2nd:

How often do British university students use Facebook each week ?

Dependent variable 1st; group 2nd:

Sometimes, the dependent variable needs to be broken into two parts around the group(s) you are interested in so that the research question flows. Again, the group(s) are in green text and the dependent variable is in blue text :

How many calories do American men and women consume per day ?

Of course, you could choose to restructure the question above so that you do not have to split the dependent variable into two parts. For example:

How many calories are consumed per day by American men and women ?

When deciding whether the dependent variable or group(s) should be included first or last, and whether the dependent variable should be broken into two parts, the main thing you need to think about is flow : Does the question flow? Is it easy to read?

FIFTH Include any words that provide greater context to your question

Sometimes the name of the dependent variable provides all the explanation we need to know what we are trying to measure. Take the following examples:

In the first example, the dependent variable is daily calorific intake (i.e., calories consumed per day). Clearly, this descriptive research question is asking us to measure the number of calories American men and women consume per day. In the second example, the dependent variable is Facebook usage per week. Again, the name of this dependent variable makes it easy for us to understand that we are trying to measure the often (i.e., how frequently; e.g., 16 times per week) British university students use Facebook.

However, sometimes a descriptive research question is not simply interested in measuring the dependent variable in its entirety, but a particular component of the dependent variable. Take the following examples in red text :

In the first example, the research question is not simply interested in the daily calorific intake of American men and women, but what percentage of these American men and women exceeded their daily calorific allowance. So the dependent variable is still daily calorific intake, but the research question aims to understand a particular component of that dependent variable (i.e., the percentage of American men and women exceeding the recommend daily calorific allowance). In the second example, the research question is not only interested in what the factors influencing career choices are, but which of these factors are the most important.

Therefore, when you think about constructing your descriptive research question, make sure you have included any words that provide greater context to your question.

SIXTH Write out the descriptive research question

Once you have these details ? (1) the starting phrase, (2) the name of the dependent variable, (3) the name of the group(s) you are interested in, and (4) any potential joining words ? you can write out the descriptive research question in full. The example descriptive research questions discussed above are written out in full below:

In the section that follows, the structure of comparative research questions is discussed.

Library Guides

Dissertations 4: methodology: methods.

• Introduction & Philosophy
• Methodology

Primary & Secondary Sources, Primary & Secondary Data

When describing your research methods, you can start by stating what kind of secondary and, if applicable, primary sources you used in your research. Explain why you chose such sources, how well they served your research, and identify possible issues encountered using these sources.  

Definitions  

There is some confusion on the use of the terms primary and secondary sources, and primary and secondary data. The confusion is also due to disciplinary differences (Lombard 2010). Whilst you are advised to consult the research methods literature in your field, we can generalise as follows:  

Secondary sources 

Secondary sources normally include the literature (books and articles) with the experts' findings, analysis and discussions on a certain topic (Cottrell, 2014, p123). Secondary sources often interpret primary sources.  

Primary sources 

Primary sources are "first-hand" information such as raw data, statistics, interviews, surveys, law statutes and law cases. Even literary texts, pictures and films can be primary sources if they are the object of research (rather than, for example, documentaries reporting on something else, in which case they would be secondary sources). The distinction between primary and secondary sources sometimes lies on the use you make of them (Cottrell, 2014, p123). 

Primary data 

Primary data are data (primary sources) you directly obtained through your empirical work (Saunders, Lewis and Thornhill 2015, p316). 

Secondary data 

Secondary data are data (primary sources) that were originally collected by someone else (Saunders, Lewis and Thornhill 2015, p316).   

Comparison between primary and secondary data   

Use  

Virtually all research will use secondary sources, at least as background information. 

Often, especially at the postgraduate level, it will also use primary sources - secondary and/or primary data. The engagement with primary sources is generally appreciated, as less reliant on others' interpretations, and closer to 'facts'. 

The use of primary data, as opposed to secondary data, demonstrates the researcher's effort to do empirical work and find evidence to answer her specific research question and fulfill her specific research objectives. Thus, primary data contribute to the originality of the research.    

Ultimately, you should state in this section of the methodology: 

What sources and data you are using and why (how are they going to help you answer the research question and/or test the hypothesis. 

If using primary data, why you employed certain strategies to collect them. 

What the advantages and disadvantages of your strategies to collect the data (also refer to the research in you field and research methods literature). 

Quantitative, Qualitative & Mixed Methods

The methodology chapter should reference your use of quantitative research, qualitative research and/or mixed methods. The following is a description of each along with their advantages and disadvantages. 

Quantitative research 

Quantitative research uses numerical data (quantities) deriving, for example, from experiments, closed questions in surveys, questionnaires, structured interviews or published data sets (Cottrell, 2014, p93). It normally processes and analyses this data using quantitative analysis techniques like tables, graphs and statistics to explore, present and examine relationships and trends within the data (Saunders, Lewis and Thornhill, 2015, p496). 

Qualitative research  

Qualitative research is generally undertaken to study human behaviour and psyche. It uses methods like in-depth case studies, open-ended survey questions, unstructured interviews, focus groups, or unstructured observations (Cottrell, 2014, p93). The nature of the data is subjective, and also the analysis of the researcher involves a degree of subjective interpretation. Subjectivity can be controlled for in the research design, or has to be acknowledged as a feature of the research. Subject-specific books on (qualitative) research methods offer guidance on such research designs.  

Mixed methods 

Mixed-method approaches combine both qualitative and quantitative methods, and therefore combine the strengths of both types of research. Mixed methods have gained popularity in recent years.  

When undertaking mixed-methods research you can collect the qualitative and quantitative data either concurrently or sequentially. If sequentially, you can for example, start with a few semi-structured interviews, providing qualitative insights, and then design a questionnaire to obtain quantitative evidence that your qualitative findings can also apply to a wider population (Specht, 2019, p138). 

Ultimately, your methodology chapter should state: 

Whether you used quantitative research, qualitative research or mixed methods. 

Why you chose such methods (and refer to research method sources). 

Why you rejected other methods. 

How well the method served your research. 

The problems or limitations you encountered. 

Doug Specht, Senior Lecturer at the Westminster School of Media and Communication, explains mixed methods research in the following video:

LinkedIn Learning Video on Academic Research Foundations: Quantitative

The video covers the characteristics of quantitative research, and explains how to approach different parts of the research process, such as creating a solid research question and developing a literature review. He goes over the elements of a study, explains how to collect and analyze data, and shows how to present your data in written and numeric form.

Link to quantitative research video

Some Types of Methods

There are several methods you can use to get primary data. To reiterate, the choice of the methods should depend on your research question/hypothesis. 

Whatever methods you will use, you will need to consider: 

why did you choose one technique over another? What were the advantages and disadvantages of the technique you chose? 

what was the size of your sample? Who made up your sample? How did you select your sample population? Why did you choose that particular sampling strategy?) 

ethical considerations (see also tab...)  

safety considerations  

validity  

feasibility  

recording  

procedure of the research (see box procedural method...).  

Check Stella Cottrell's book  Dissertations and Project Reports: A Step by Step Guide  for some succinct yet comprehensive information on most methods (the following account draws mostly on her work). Check a research methods book in your discipline for more specific guidance.  

Experiments 

Experiments are useful to investigate cause and effect, when the variables can be tightly controlled. They can test a theory or hypothesis in controlled conditions. Experiments do not prove or disprove an hypothesis, instead they support or not support an hypothesis. When using the empirical and inductive method it is not possible to achieve conclusive results. The results may only be valid until falsified by other experiments and observations. 

For more information on Scientific Method, click here . 

Observations 

Observational methods are useful for in-depth analyses of behaviours in people, animals, organisations, events or phenomena. They can test a theory or products in real life or simulated settings. They generally a qualitative research method.  

Questionnaires and surveys 

Questionnaires and surveys are useful to gain opinions, attitudes, preferences, understandings on certain matters. They can provide quantitative data that can be collated systematically; qualitative data, if they include opportunities for open-ended responses; or both qualitative and quantitative elements. 

Interviews  

Interviews are useful to gain rich, qualitative information about individuals' experiences, attitudes or perspectives. With interviews you can follow up immediately on responses for clarification or further details. There are three main types of interviews: structured (following a strict pattern of questions, which expect short answers), semi-structured (following a list of questions, with the opportunity to follow up the answers with improvised questions), and unstructured (following a short list of broad questions, where the respondent can lead more the conversation) (Specht, 2019, p142). 

This short video on qualitative interviews discusses best practices and covers qualitative interview design, preparation and data collection methods. 

Focus groups   

In this case, a group of people (normally, 4-12) is gathered for an interview where the interviewer asks questions to such group of participants. Group interactions and discussions can be highly productive, but the researcher has to beware of the group effect, whereby certain participants and views dominate the interview (Saunders, Lewis and Thornhill 2015, p419). The researcher can try to minimise this by encouraging involvement of all participants and promoting a multiplicity of views. 

This video focuses on strategies for conducting research using focus groups.  

Check out the guidance on online focus groups by Aliaksandr Herasimenka, which is attached at the bottom of this text box. 

Case study 

Case studies are often a convenient way to narrow the focus of your research by studying how a theory or literature fares with regard to a specific person, group, organisation, event or other type of entity or phenomenon you identify. Case studies can be researched using other methods, including those described in this section. Case studies give in-depth insights on the particular reality that has been examined, but may not be representative of what happens in general, they may not be generalisable, and may not be relevant to other contexts. These limitations have to be acknowledged by the researcher.     

Content analysis 

Content analysis consists in the study of words or images within a text. In its broad definition, texts include books, articles, essays, historical documents, speeches, conversations, advertising, interviews, social media posts, films, theatre, paintings or other visuals. Content analysis can be quantitative (e.g. word frequency) or qualitative (e.g. analysing intention and implications of the communication). It can detect propaganda, identify intentions of writers, and can see differences in types of communication (Specht, 2019, p146). Check this page on collecting, cleaning and visualising Twitter data.

Extra links and resources:  

Research Methods  

A clear and comprehensive overview of research methods by Emerald Publishing. It includes: crowdsourcing as a research tool; mixed methods research; case study; discourse analysis; ground theory; repertory grid; ethnographic method and participant observation; interviews; focus group; action research; analysis of qualitative data; survey design; questionnaires; statistics; experiments; empirical research; literature review; secondary data and archival materials; data collection. 

Doing your dissertation during the COVID-19 pandemic  

Resources providing guidance on doing dissertation research during the pandemic: Online research methods; Secondary data sources; Webinars, conferences and podcasts; 

• Virtual Focus Groups Guidance on managing virtual focus groups

5 Minute Methods Videos

The following are a series of useful videos that introduce research methods in five minutes. These resources have been produced by lecturers and students with the University of Westminster's School of Media and Communication. 

Case Study Research

Research Ethics

Quantitative Content Analysis 

Sequential Analysis 

Qualitative Content Analysis 

Thematic Analysis 

Social Media Research 

Mixed Method Research 

Procedural Method

In this part, provide an accurate, detailed account of the methods and procedures that were used in the study or the experiment (if applicable!). 

Include specifics about participants, sample, materials, design and methods. 

If the research involves human subjects, then include a detailed description of who and how many participated along with how the participants were selected.  

Describe all materials used for the study, including equipment, written materials and testing instruments. 

Identify the study's design and any variables or controls employed. 

Write out the steps in the order that they were completed. 

Indicate what participants were asked to do, how measurements were taken and any calculations made to raw data collected. 

Specify statistical techniques applied to the data to reach your conclusions. 

Provide evidence that you incorporated rigor into your research. This is the quality of being thorough and accurate and considers the logic behind your research design. 

Highlight any drawbacks that may have limited your ability to conduct your research thoroughly. 

You have to provide details to allow others to replicate the experiment and/or verify the data, to test the validity of the research. 

Bibliography

Cottrell, S. (2014). Dissertations and project reports: a step by step guide. Hampshire, England: Palgrave Macmillan.

Lombard, E. (2010). Primary and secondary sources.  The Journal of Academic Librarianship , 36(3), 250-253

Saunders, M.N.K., Lewis, P. and Thornhill, A. (2015).  Research Methods for Business Students.  New York: Pearson Education. 

Specht, D. (2019).  The Media And Communications Study Skills Student Guide . London: University of Westminster Press.  

• << Previous: Introduction & Philosophy
• Next: Ethics >>
• Last Updated: Sep 14, 2022 12:58 PM
• URL: https://libguides.westminster.ac.uk/methodology-for-dissertations

CONNECT WITH US

• Privacy Policy

Buy Me a Coffee

Home » Dissertation Methodology – Structure, Example and Writing Guide

Dissertation Methodology – Structure, Example and Writing Guide

• Table of Contents

Dissertation Methodology

In any research, the methodology chapter is one of the key components of your dissertation. It provides a detailed description of the methods you used to conduct your research and helps readers understand how you obtained your data and how you plan to analyze it. This section is crucial for replicating the study and validating its results.

Here are the basic elements that are typically included in a dissertation methodology:

• Introduction : This section should explain the importance and goals of your research .
• Research Design : Outline your research approach and why it’s appropriate for your study. You might be conducting an experimental research, a qualitative research, a quantitative research, or a mixed-methods research.
• Data Collection : This section should detail the methods you used to collect your data. Did you use surveys, interviews, observations, etc.? Why did you choose these methods? You should also include who your participants were, how you recruited them, and any ethical considerations.
• Data Analysis : Explain how you intend to analyze the data you collected. This could include statistical analysis, thematic analysis, content analysis, etc., depending on the nature of your study.
• Reliability and Validity : Discuss how you’ve ensured the reliability and validity of your study. For instance, you could discuss measures taken to reduce bias, how you ensured that your measures accurately capture what they were intended to, or how you will handle any limitations in your study.
• Ethical Considerations : This is where you state how you have considered ethical issues related to your research, how you have protected the participants’ rights, and how you have complied with the relevant ethical guidelines.
• Limitations : Acknowledge any limitations of your methodology, including any biases and constraints that might have affected your study.
• Summary : Recap the key points of your methodology chapter, highlighting the overall approach and rationalization of your research.

Types of Dissertation Methodology

The type of methodology you choose for your dissertation will depend on the nature of your research question and the field you’re working in. Here are some of the most common types of methodologies used in dissertations:

Experimental Research

This involves creating an experiment that will test your hypothesis. You’ll need to design an experiment, manipulate variables, collect data, and analyze that data to draw conclusions. This is commonly used in fields like psychology, biology, and physics.

Survey Research

This type of research involves gathering data from a large number of participants using tools like questionnaires or surveys. It can be used to collect a large amount of data and is often used in fields like sociology, marketing, and public health.

Qualitative Research

This type of research is used to explore complex phenomena that can’t be easily quantified. Methods include interviews, focus groups, and observations. This methodology is common in fields like anthropology, sociology, and education.

Quantitative Research

Quantitative research uses numerical data to answer research questions. This can include statistical, mathematical, or computational techniques. It’s common in fields like economics, psychology, and health sciences.

Case Study Research

This type of research involves in-depth investigation of a particular case, such as an individual, group, or event. This methodology is often used in psychology, social sciences, and business.

Mixed Methods Research

This combines qualitative and quantitative research methods in a single study. It’s used to answer more complex research questions and is becoming more popular in fields like social sciences, health sciences, and education.

Action Research

This type of research involves taking action and then reflecting upon the results. This cycle of action-reflection-action continues throughout the study. It’s often used in fields like education and organizational development.

Longitudinal Research

This type of research involves studying the same group of individuals over an extended period of time. This could involve surveys, observations, or experiments. It’s common in fields like psychology, sociology, and medicine.

Ethnographic Research

This type of research involves the in-depth study of people and cultures. Researchers immerse themselves in the culture they’re studying to collect data. This is often used in fields like anthropology and social sciences.

Structure of Dissertation Methodology

The structure of a dissertation methodology can vary depending on your field of study, the nature of your research, and the guidelines of your institution. However, a standard structure typically includes the following elements:

• Introduction : Briefly introduce your overall approach to the research. Explain what you plan to explore and why it’s important.
• Research Design/Approach : Describe your overall research design. This can be qualitative, quantitative, or mixed methods. Explain the rationale behind your chosen design and why it is suitable for your research questions or hypotheses.
• Data Collection Methods : Detail the methods you used to collect your data. You should include what type of data you collected, how you collected it, and why you chose this method. If relevant, you can also include information about your sample population, such as how many people participated, how they were chosen, and any relevant demographic information.
• Data Analysis Methods : Explain how you plan to analyze your collected data. This will depend on the nature of your data. For example, if you collected quantitative data, you might discuss statistical analysis techniques. If you collected qualitative data, you might discuss coding strategies, thematic analysis, or narrative analysis.
• Reliability and Validity : Discuss how you’ve ensured the reliability and validity of your research. This might include steps you took to reduce bias or increase the accuracy of your measurements.
• Ethical Considerations : If relevant, discuss any ethical issues associated with your research. This might include how you obtained informed consent from participants, how you ensured participants’ privacy and confidentiality, or any potential conflicts of interest.
• Limitations : Acknowledge any limitations in your research methodology. This could include potential sources of bias, difficulties with data collection, or limitations in your analysis methods.
• Summary/Conclusion : Briefly summarize the key points of your methodology, emphasizing how it helps answer your research questions or hypotheses.

How to Write Dissertation Methodology

Writing a dissertation methodology requires you to be clear and precise about the way you’ve carried out your research. It’s an opportunity to convince your readers of the appropriateness and reliability of your approach to your research question. Here is a basic guideline on how to write your methodology section:

1. Introduction

Start your methodology section by restating your research question(s) or objective(s). This ensures your methodology directly ties into the aim of your research.

2. Approach

Identify your overall approach: qualitative, quantitative, or mixed methods. Explain why you have chosen this approach.

• Qualitative methods are typically used for exploratory research and involve collecting non-numerical data. This might involve interviews, observations, or analysis of texts.
• Quantitative methods are used for research that relies on numerical data. This might involve surveys, experiments, or statistical analysis.
• Mixed methods use a combination of both qualitative and quantitative research methods.

3. Research Design

Describe the overall design of your research. This could involve explaining the type of study (e.g., case study, ethnography, experimental research, etc.), how you’ve defined and measured your variables, and any control measures you’ve implemented.

4. Data Collection

Explain in detail how you collected your data.

• If you’ve used qualitative methods, you might detail how you selected participants for interviews or focus groups, how you conducted observations, or how you analyzed existing texts.
• If you’ve used quantitative methods, you might detail how you designed your survey or experiment, how you collected responses, and how you ensured your data is reliable and valid.

5. Data Analysis

Describe how you analyzed your data.

• If you’re doing qualitative research, this might involve thematic analysis, discourse analysis, or grounded theory.
• If you’re doing quantitative research, you might be conducting statistical tests, regression analysis, or factor analysis.

Discuss any ethical issues related to your research. This might involve explaining how you obtained informed consent, how you’re protecting participants’ privacy, or how you’re managing any potential harms to participants.

7. Reliability and Validity

Discuss the steps you’ve taken to ensure the reliability and validity of your data.

• Reliability refers to the consistency of your measurements, and you might discuss how you’ve piloted your instruments or used standardized measures.
• Validity refers to the accuracy of your measurements, and you might discuss how you’ve ensured your measures reflect the concepts they’re supposed to measure.

8. Limitations

Every study has its limitations. Discuss the potential weaknesses of your chosen methods and explain any obstacles you faced in your research.

9. Conclusion

Summarize the key points of your methodology, emphasizing how it helps to address your research question or objective.

Example of Dissertation Methodology

An Example of Dissertation Methodology is as follows:

Chapter 3: Methodology

• Introduction

This chapter details the methodology adopted in this research. The study aimed to explore the relationship between stress and productivity in the workplace. A mixed-methods research design was used to collect and analyze data.

Research Design

This study adopted a mixed-methods approach, combining quantitative surveys with qualitative interviews to provide a comprehensive understanding of the research problem. The rationale for this approach is that while quantitative data can provide a broad overview of the relationships between variables, qualitative data can provide deeper insights into the nuances of these relationships.

Data Collection Methods

Quantitative Data Collection : An online self-report questionnaire was used to collect data from participants. The questionnaire consisted of two standardized scales: the Perceived Stress Scale (PSS) to measure stress levels and the Individual Work Productivity Questionnaire (IWPQ) to measure productivity. The sample consisted of 200 office workers randomly selected from various companies in the city.

Qualitative Data Collection : Semi-structured interviews were conducted with 20 participants chosen from the initial sample. The interview guide included questions about participants’ experiences with stress and how they perceived its impact on their productivity.

Data Analysis Methods

Quantitative Data Analysis : Descriptive and inferential statistics were used to analyze the survey data. Pearson’s correlation was used to examine the relationship between stress and productivity.

Qualitative Data Analysis : Interviews were transcribed and subjected to thematic analysis using NVivo software. This process allowed for identifying and analyzing patterns and themes regarding the impact of stress on productivity.

Reliability and Validity

To ensure reliability and validity, standardized measures with good psychometric properties were used. In qualitative data analysis, triangulation was employed by having two researchers independently analyze the data and then compare findings.

Ethical Considerations

All participants provided informed consent prior to their involvement in the study. They were informed about the purpose of the study, their rights as participants, and the confidentiality of their responses.

Limitations

The main limitation of this study is its reliance on self-report measures, which can be subject to biases such as social desirability bias. Moreover, the sample was drawn from a single city, which may limit the generalizability of the findings.

Where to Write Dissertation Methodology

In a dissertation or thesis, the Methodology section usually follows the Literature Review. This placement allows the Methodology to build upon the theoretical framework and existing research outlined in the Literature Review, and precedes the Results or Findings section. Here’s a basic outline of how most dissertations are structured:

• Acknowledgements
• Literature Review (or it may be interspersed throughout the dissertation)
• Methodology
• Results/Findings
• References/Bibliography

In the Methodology chapter, you will discuss the research design, data collection methods, data analysis methods, and any ethical considerations pertaining to your study. This allows your readers to understand how your research was conducted and how you arrived at your results.

Advantages of Dissertation Methodology

The dissertation methodology section plays an important role in a dissertation for several reasons. Here are some of the advantages of having a well-crafted methodology section in your dissertation:

• Clarifies Your Research Approach : The methodology section explains how you plan to tackle your research question, providing a clear plan for data collection and analysis.
• Enables Replication : A detailed methodology allows other researchers to replicate your study. Replication is an important aspect of scientific research because it provides validation of the study’s results.
• Demonstrates Rigor : A well-written methodology shows that you’ve thought critically about your research methods and have chosen the most appropriate ones for your research question. This adds credibility to your study.
• Enhances Transparency : Detailing your methods allows readers to understand the steps you took in your research. This increases the transparency of your study and allows readers to evaluate potential biases or limitations.
• Helps in Addressing Research Limitations : In your methodology section, you can acknowledge and explain the limitations of your research. This is important as it shows you understand that no research method is perfect and there are always potential weaknesses.
• Facilitates Peer Review : A detailed methodology helps peer reviewers assess the soundness of your research design. This is an important part of the publication process if you aim to publish your dissertation in a peer-reviewed journal.
• Establishes the Validity and Reliability : Your methodology section should also include a discussion of the steps you took to ensure the validity and reliability of your measurements, which is crucial for establishing the overall quality of your research.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Delimitations in Research – Types, Examples and...

Research Design – Types, Methods and Examples

What is a Hypothesis – Types, Examples and...

Dissertation – Format, Example and Template

Dissertation vs Thesis – Key Differences

Ethical Considerations – Types, Examples and...

• How it works

Full Dissertation Samples and Examples

Students often face difficulty in starting their dissertations. One way to cater to this problem is to look at samples of full dissertations available online. We understand this problem. Therefore, our professionals have curated expert full dissertation examples for students to get inspired by and start working on their own dissertations.

Full Dissertation Sample

Discipline: Economics

Quality: 1st / 78%

Discipline: Business

Quality: 1st / 74%

Discipline: Big Data

Quality: 2:1 / 68%

Undergraduate

Discipline: Engineering Management

Quality: 2:1 / 69%

Discipline: Business Management

Discipline: Project Management

Quality: 1st / 73%

Discipline: Physiotherapy

Quality: 1st / 79%

Discipline: Marketing

Quality: 1st / 76%

Discipline: HRM

Discipline: Civil Engineering

Theism and Ultimate Explanation of the Existence of God” against ….

Dissertation

Extraversion and Occupational Choice

Feeding and resource buffers in ccpm and the impact of their use …..

Project Management

Impact of the Global Financial Crisis 2008-2009 on the UK ….

Material selection for innovative design of automotive component.

Engineering

Cognitive Process of Entrepreneurs in the Examination ….

Entrepreneurship

The Impact of Gender on Purchase Decision and Buying Behaviour ….

The leadership styles of successful project managers …., why manchester united football club has been one of the most successful sports …., investigating the impact of employee engagement on organisational performance…., should countries implement a constitutional court for fundamental rights breaches, optimising global supply chain operations: a collection of undergraduate dissertation samples.

Supply Chain

Newspaper coverage of refugees from Mainland China between 1937 and 1941 in Hong Kong

Our full dissetation features, customised dissertations.

These examples of a full dissertation are just for reference. We provide work based on your requirements.

Expert Writers

We have professional dissertation writers in each field to complete your dissertations.

Quality Control

These expert full dissertation examples showcase the quality of work that can be expected from us.

Plagiarism Free

We ensure that our content is 100% plagiarism free and checked with paid tools.

Proofreading

The dissertations are proofread by professionals to remove any errors before delivery.

We set our prices according to the affordability of the majority of students so everyone can avail.

Loved by over 100,000 students

Thousands of students have used ResearchProspect academic support services to improve their grades. Why are you waiting?

"I was having the hardest time starting my dissertation. I went online and checked their full dissertation samples. It helped me a lot! "

Law Student

"Trusting someone with your work is hard. I wanted a reliable resource. I saw their full dissertation samples and immediately placed my order. "

Literature Student

What is a Dissertation?

A dissertation is a complex and comprehensive academic project students must complete towards the end of their degree programme. It requires deep independent research on a topic approved by your tutor. A dissertation contains five chapters – introduction, literature review, methodology, discussion, and conclusion. This is the standard structure for a dissertation unless stated otherwise by your tutor or institution.

Writing a Dissertation Proposal

After selecting a topic, the next step is preparing a proposal. A dissertation proposal is a plan or outline of the research you intend to conduct. It gives a background to the topic, lays out your research aims and objectives, and gives details of the research methodology you intend to use.

If your university accepts your proposal, you can start work on the dissertation paper. If it’s not accepted at first, make amendments to the proposal based on your supervisor’s feedback.

Referencing

Referencing is not some little detail at the end of the paper. Without correct referencing, even a brilliant paper can fail miserably. Citing every source accurately is an absolute must.

Don't Neglect Small Details.

Completing a dissertation proves you can carry out something thoroughly. Therefore, you should attend to each part of the dissertation and omit nothing.

Things like creating a table of contents with the page numbers listed, the reference list, and appendices are all parts of a dissertation. They all contribute to your grade. Look at our dissertation samples and writing guides to get a good understanding.

Choosing Your Dissertation Topic

Choosing a dissertation topic is the first step towards writing a dissertation. However, you should make sure the topic is relevant to your degree programme. It should investigate a specific problem and contribute towards the existing literature.

In order to stay motivated throughout the process, the research topic should be in line with your interests. At ResearchProspect, our expert academics can provide you with unique, manageable topics so you can choose one that suits your needs. Whether you’re an undergraduate or postgraduate student, topics from ResearchProspect can go a long way towards helping you achieve your desired grade.

How to Write a Dissertation

Acceptance of your dissertation proposal is the starting signal. Check out our dissertation writing service and look through our thesis samples to grasp the typical writing style.

Structure of a Dissertation

You have a topic and it’s been accepted. Now comes the structure and format. The first chapter will introduce the topic, the second should then explore it deeply and discuss relevant models, frameworks, and concepts.

The third chapter is where you explain your methodology in detail. The fourth and fifth chapters are for discussing the results and concluding the research, respectively.

Our full dissertation samples and writing guides will help you better understand dissertation structure and formatting.

How ResearchProspect Can Help!

Looking for dissertation help? At ResearchProspect, we know how difficult producing a first-class dissertation is. When you have other projects on, it’s particularly demanding.

Head to our order form. You can place your order today. If you’re not ready to commit yet, just message us about your project and what you’re considering. We have experts to write your full dissertation to your requirements.

Explore More Samples

View our professional samples to be certain that we have the portofilio and capabilities to deliver what you need.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works