how to write dissertation results section

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write a Results Section | Tips & Examples

How to Write a Results Section | Tips & Examples

Published on August 30, 2022 by Tegan George . Revised on July 18, 2023.

A results section is where you report the main findings of the data collection and analysis you conducted for your thesis or dissertation . You should report all relevant results concisely and objectively, in a logical order. Don’t include subjective interpretations of why you found these results or what they mean—any evaluation should be saved for the discussion section .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

How to write a results section, reporting quantitative research results, reporting qualitative research results, results vs. discussion vs. conclusion, checklist: research results, other interesting articles, frequently asked questions about results sections.

When conducting research, it’s important to report the results of your study prior to discussing your interpretations of it. This gives your reader a clear idea of exactly what you found and keeps the data itself separate from your subjective analysis.

Here are a few best practices:

• Your results should always be written in the past tense.
• While the length of this section depends on how much data you collected and analyzed, it should be written as concisely as possible.
• Only include results that are directly relevant to answering your research questions . Avoid speculative or interpretative words like “appears” or “implies.”
• If you have other results you’d like to include, consider adding them to an appendix or footnotes.
• Always start out with your broadest results first, and then flow into your more granular (but still relevant) ones. Think of it like a shoe store: first discuss the shoes as a whole, then the sneakers, boots, sandals, etc.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

If you conducted quantitative research , you’ll likely be working with the results of some sort of statistical analysis .

Your results section should report the results of any statistical tests you used to compare groups or assess relationships between variables . It should also state whether or not each hypothesis was supported.

The most logical way to structure quantitative results is to frame them around your research questions or hypotheses. For each question or hypothesis, share:

• A reminder of the type of analysis you used (e.g., a two-sample t test or simple linear regression ). A more detailed description of your analysis should go in your methodology section.
• A concise summary of each relevant result, both positive and negative. This can include any relevant descriptive statistics (e.g., means and standard deviations ) as well as inferential statistics (e.g., t scores, degrees of freedom , and p values ). Remember, these numbers are often placed in parentheses.
• A brief statement of how each result relates to the question, or whether the hypothesis was supported. You can briefly mention any results that didn’t fit with your expectations and assumptions, but save any speculation on their meaning or consequences for your discussion  and conclusion.

A note on tables and figures

In quantitative research, it’s often helpful to include visual elements such as graphs, charts, and tables , but only if they are directly relevant to your results. Give these elements clear, descriptive titles and labels so that your reader can easily understand what is being shown. If you want to include any other visual elements that are more tangential in nature, consider adding a figure and table list .

As a rule of thumb:

• Tables are used to communicate exact values, giving a concise overview of various results
• Graphs and charts are used to visualize trends and relationships, giving an at-a-glance illustration of key findings

Don’t forget to also mention any tables and figures you used within the text of your results section. Summarize or elaborate on specific aspects you think your reader should know about rather than merely restating the same numbers already shown.

A two-sample t test was used to test the hypothesis that higher social distance from environmental problems would reduce the intent to donate to environmental organizations, with donation intention (recorded as a score from 1 to 10) as the outcome variable and social distance (categorized as either a low or high level of social distance) as the predictor variable.Social distance was found to be positively correlated with donation intention, t (98) = 12.19, p < .001, with the donation intention of the high social distance group 0.28 points higher, on average, than the low social distance group (see figure 1). This contradicts the initial hypothesis that social distance would decrease donation intention, and in fact suggests a small effect in the opposite direction.

Figure 1: Intention to donate to environmental organizations based on social distance from impact of environmental damage.

In qualitative research , your results might not all be directly related to specific hypotheses. In this case, you can structure your results section around key themes or topics that emerged from your analysis of the data.

For each theme, start with general observations about what the data showed. You can mention:

• Recurring points of agreement or disagreement
• Patterns and trends
• Particularly significant snippets from individual responses

Next, clarify and support these points with direct quotations. Be sure to report any relevant demographic information about participants. Further information (such as full transcripts , if appropriate) can be included in an appendix .

When asked about video games as a form of art, the respondents tended to believe that video games themselves are not an art form, but agreed that creativity is involved in their production. The criteria used to identify artistic video games included design, story, music, and creative teams.One respondent (male, 24) noted a difference in creativity between popular video game genres:

“I think that in role-playing games, there’s more attention to character design, to world design, because the whole story is important and more attention is paid to certain game elements […] so that perhaps you do need bigger teams of creative experts than in an average shooter or something.”

Responses suggest that video game consumers consider some types of games to have more artistic potential than others.

Your results section should objectively report your findings, presenting only brief observations in relation to each question, hypothesis, or theme.

It should not  speculate about the meaning of the results or attempt to answer your main research question . Detailed interpretation of your results is more suitable for your discussion section , while synthesis of your results into an overall answer to your main research question is best left for your conclusion .

The only proofreading tool specialized in correcting academic writing - try for free!

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Try for free

I have completed my data collection and analyzed the results.

I have included all results that are relevant to my research questions.

I have concisely and objectively reported each result, including relevant descriptive statistics and inferential statistics .

I have stated whether each hypothesis was supported or refuted.

I have used tables and figures to illustrate my results where appropriate.

All tables and figures are correctly labelled and referred to in the text.

There is no subjective interpretation or speculation on the meaning of the results.

You've finished writing up your results! Use the other checklists to further improve your thesis.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). How to Write a Results Section | Tips & Examples. Scribbr. Retrieved April 10, 2024, from https://www.scribbr.com/dissertation/results/

Is this article helpful?

Tegan George

Other students also liked, what is a research methodology | steps & tips, how to write a discussion section | tips & examples, how to write a thesis or dissertation conclusion, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• How it works

How to Write the Dissertation Findings or Results – Steps & Tips

Published by Grace Graffin at August 11th, 2021 , Revised On October 9, 2023

Each  part of the dissertation is unique, and some general and specific rules must be followed. The dissertation’s findings section presents the key results of your research without interpreting their meaning .

Theoretically, this is an exciting section of a dissertation because it involves writing what you have observed and found. However, it can be a little tricky if there is too much information to confuse the readers.

The goal is to include only the essential and relevant findings in this section. The results must be presented in an orderly sequence to provide clarity to the readers.

This section of the dissertation should be easy for the readers to follow, so you should avoid going into a lengthy debate over the interpretation of the results.

It is vitally important to focus only on clear and precise observations. The findings chapter of the  dissertation  is theoretically the easiest to write.

It includes  statistical analysis and a brief write-up about whether or not the results emerging from the analysis are significant. This segment should be written in the past sentence as you describe what you have done in the past.

This article will provide detailed information about  how to   write the findings of a dissertation .

When to Write Dissertation Findings Chapter

As soon as you have gathered and analysed your data, you can start to write up the findings chapter of your dissertation paper. Remember that it is your chance to report the most notable findings of your research work and relate them to the research hypothesis  or  research questions set out in  the introduction chapter of the dissertation .

You will be required to separately report your study’s findings before moving on to the discussion chapter  if your dissertation is based on the  collection of primary data  or experimental work.

However, you may not be required to have an independent findings chapter if your dissertation is purely descriptive and focuses on the analysis of case studies or interpretation of texts.

• Always report the findings of your research in the past tense.
• The dissertation findings chapter varies from one project to another, depending on the data collected and analyzed.
• Avoid reporting results that are not relevant to your research questions or research hypothesis.

Does your Dissertation Have the Following?

• Great Research/Sources
• Perfect Language
• Accurate Sources

If not, we can help. Our panel of experts makes sure to keep the 3 pillars of the Dissertation strong.

1. Reporting Quantitative Findings

The best way to present your quantitative findings is to structure them around the research  hypothesis or  questions you intend to address as part of your dissertation project.

Report the relevant findings for each research question or hypothesis, focusing on how you analyzed them.

Analysis of your findings will help you determine how they relate to the different research questions and whether they support the hypothesis you formulated.

While you must highlight meaningful relationships, variances, and tendencies, it is important not to guess their interpretations and implications because this is something to save for the discussion  and  conclusion  chapters.

Any findings not directly relevant to your research questions or explanations concerning the data collection process  should be added to the dissertation paper’s appendix section.

Use of Figures and Tables in Dissertation Findings

Suppose your dissertation is based on quantitative research. In that case, it is important to include charts, graphs, tables, and other visual elements to help your readers understand the emerging trends and relationships in your findings.

Repeating information will give the impression that you are short on ideas. Refer to all charts, illustrations, and tables in your writing but avoid recurrence.

The text should be used only to elaborate and summarize certain parts of your results. On the other hand, illustrations and tables are used to present multifaceted data.

It is recommended to give descriptive labels and captions to all illustrations used so the readers can figure out what each refers to.

How to Report Quantitative Findings

Here is an example of how to report quantitative results in your dissertation findings chapter;

Two hundred seventeen participants completed both the pretest and post-test and a Pairwise T-test was used for the analysis. The quantitative data analysis reveals a statistically significant difference between the mean scores of the pretest and posttest scales from the Teachers Discovering Computers course. The pretest mean was 29.00 with a standard deviation of 7.65, while the posttest mean was 26.50 with a standard deviation of 9.74 (Table 1). These results yield a significance level of .000, indicating a strong treatment effect (see Table 3). With the correlation between the scores being .448, the little relationship is seen between the pretest and posttest scores (Table 2). This leads the researcher to conclude that the impact of the course on the educators’ perception and integration of technology into the curriculum is dramatic.

Paired Samples

Paired samples correlation, paired samples test.

Also Read: How to Write the Abstract for the Dissertation.

2. Reporting Qualitative Findings

A notable issue with reporting qualitative findings is that not all results directly relate to your research questions or hypothesis.

The best way to present the results of qualitative research is to frame your findings around the most critical areas or themes you obtained after you examined the data.

In-depth data analysis will help you observe what the data shows for each theme. Any developments, relationships, patterns, and independent responses directly relevant to your research question or hypothesis should be mentioned to the readers.

Additional information not directly relevant to your research can be included in the appendix .

How to Report Qualitative Findings

Here is an example of how to report qualitative results in your dissertation findings chapter;

How do I report quantitative findings?

The best way to present your quantitative findings is to structure them around the  research hypothesis  or  research questions  you intended to address as part of your dissertation project. Report the relevant findings for each of the research questions or hypotheses, focusing on how you analyzed them.

How do I report qualitative findings?

The best way to present the  qualitative research  results is to frame your findings around the most important areas or themes that you obtained after examining the data.

An in-depth analysis of the data will help you observe what the data is showing for each theme. Any developments, relationships, patterns, and independent responses that are directly relevant to your  research question  or  hypothesis  should be clearly mentioned for the readers.

Can I use interpretive phrases like ‘it confirms’ in the finding chapter?

No, It is highly advisable to avoid using interpretive and subjective phrases in the finding chapter. These terms are more suitable for the  discussion chapter , where you will be expected to provide your interpretation of the results in detail.

Can I report the results from other research papers in my findings chapter?

NO, you must not be presenting results from other research studies in your findings.

You May Also Like

How to Structure a Dissertation or Thesis Need interesting and manageable Finance and Accounting dissertation topics? Here are the trending Media dissertation titles so you can choose one most suitable to your needs.

Writing a dissertation can be tough if this is the first time you are doing it. You need to look into relevant literature, analyze past researches, conduct surveys, interviews etc.

A literature review is a survey of theses, articles, books and other academic sources. Here are guidelines on how to write dissertation literature review.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

How to Write an Impressive Thesis Results Section

After collecting and analyzing your research data, it’s time to write the results section. This article explains how to write and organize the thesis results section, the differences in reporting qualitative and quantitative data, the differences in the thesis results section across different fields, and the best practices for tables and figures.

What is the thesis results section?

The thesis results section factually and concisely describes what was observed and measured during the study but does not interpret the findings. It presents the findings in a logical order.

What should the thesis results section include?

• Include all relevant results as text, tables, or figures
• Report the results of subject recruitment and data collection
• For qualitative research, present the data from all statistical analyses, whether or not the results are significant
• For quantitative research, present the data by coding or categorizing themes and topics
• Present all secondary findings (e.g., subgroup analyses)
• Include all results, even if they do not fit in with your assumptions or support your hypothesis

What should the thesis results section not include?

• If the study involves the thematic analysis of an interview, don’t include complete transcripts of all interviews. Instead, add these as appendices
• Don’t present raw data. These may be included in appendices
• Don’t include background information (this should be in the introduction section )
• Don’t speculate on the meaning of results that do not support your hypothesis. This will be addressed later in the discussion and conclusion sections.
• Don’t repeat results that have been presented in tables and figures. Only highlight the pertinent points or elaborate on specific aspects

How should the thesis results section be organized?

The opening paragraph of the thesis results section should briefly restate the thesis question. Then, present the results objectively as text, figures, or tables.

Quantitative research presents the results from experiments and  statistical tests , usually in the form of tables and figures (graphs, diagrams, and images), with any pertinent findings emphasized in the text. The results are structured around the thesis question. Demographic data are usually presented first in this section.

For each statistical test used, the following information must be mentioned:

• The type of analysis used (e.g., Mann–Whitney U test or multiple regression analysis)
• A concise summary of each result, including  descriptive statistics   (e.g., means, medians, and modes) and  inferential statistics   (e.g., correlation, regression, and  p  values) and whether the results are significant
• Any trends or differences identified through comparisons
• How the findings relate to your research and if they support or contradict your hypothesis

Qualitative research   presents results around key themes or topics identified from your data analysis and explains how these themes evolved. The data are usually presented as text because it is hard to present the findings as figures.

For each theme presented, describe:

• General trends or patterns observed
• Significant or representative responses
• Relevant quotations from your study subjects

Relevant characteristics about your study subjects

Differences among the results section in different fields of research

Nevertheless, results should be presented logically across all disciplines and reflect the thesis question and any hypotheses that were tested.

The presentation of results varies considerably across disciplines. For example, a thesis documenting how a particular population interprets a specific event and a thesis investigating customer service may both have collected data using interviews and analyzed it using similar methods. Still, the presentation of the results will vastly differ because they are answering different thesis questions. A science thesis may have used experiments to generate data, and these would be presented differently again, probably involving statistics. Nevertheless, results should be presented logically across all disciplines and reflect the thesis question and any  hypotheses that were tested.

Differences between reporting thesis results in the Sciences and the Humanities and Social Sciences (HSS) domains

In the Sciences domain (qualitative and experimental research), the results and discussion sections are considered separate entities, and the results from experiments and statistical tests are presented. In the HSS domain (qualitative research), the results and discussion sections may be combined.

There are two approaches to presenting results in the HSS field:

• If you want to highlight important findings, first present a synopsis of the results and then explain the key findings.
• If you have multiple results of equal significance, present one result and explain it. Then present another result and explain that, and so on. Conclude with an overall synopsis.

Best practices for using tables and figures

The use of figures and tables is highly encouraged because they provide a standalone overview of the research findings that are much easier to understand than wading through dry text mentioning one result after another. The text in the results section should not repeat the information presented in figures and tables. Instead, it should focus on the pertinent findings or elaborate on specific points.

Some popular software programs that can be used for the analysis and presentation of statistical data include  Statistical Package for the Social Sciences (SPSS ) ,  R software ,  MATLAB , Microsoft Excel,  Statistical Analysis Software (SAS) ,  GraphPad Prism , and  Minitab .

The easiest way to construct tables is to use the  Table function in Microsoft Word . Microsoft Excel can also be used; however, Word is the easier option.

General guidelines for figures and tables

• Figures and tables must be interpretable independent from the text
• Number tables and figures consecutively (in separate lists) in the order in which they are mentioned in the text
• All tables and figures must be cited in the text
• Provide clear, descriptive titles for all figures and tables
• Include a legend to concisely describe what is presented in the figure or table

Figure guidelines

• Label figures so that the reader can easily understand what is being shown
• Use a consistent font type and font size for all labels in figure panels
• All abbreviations used in the figure artwork should be defined in the figure legend

Table guidelines

• All table columns should have a heading abbreviation used in tables should be defined in the table footnotes
• All numbers and text presented in tables must correlate with the data presented in the manuscript body

Quantitative results example : Figure 3 presents the characteristics of unemployed subjects and their rate of criminal convictions. A statistically significant association was observed between unemployed people <20 years old, the male sex, and no household income.

Qualitative results example: Table 5 shows the themes identified during the face-to-face interviews about the application that we developed to anonymously report corruption in the workplace. There was positive feedback on the app layout and ease of use. Concerns that emerged from the interviews included breaches of confidentiality and the inability to report incidents because of unstable cellphone network coverage.

Table 5. Themes and selected quotes from the evaluation of our app designed to anonymously report workplace corruption.

Tips for writing the thesis results section

• Do not state that a difference was present between the two groups unless this can be supported by a significant  p-value .
• Present the findings only . Do not comment or speculate on their interpretation.
• Every result included  must have a corresponding method in the methods section. Conversely, all methods  must have associated results presented in the results section.
• Do not explain commonly used methods. Instead, cite a reference.
• Be consistent with the units of measurement used in your thesis study. If you start with kg, then use the same unit all throughout your thesis. Also, be consistent with the capitalization of units of measurement. For example, use either “ml” or “mL” for milliliters, but not both.
• Never manipulate measurement outcomes, even if the result is unexpected. Remain objective.

Results vs. discussion vs. conclusion

Results are presented in three sections of your thesis: the results, discussion, and conclusion.

• In the results section, the data are presented simply and objectively. No speculation or interpretation is given.
• In the discussion section, the meaning of the results is interpreted and put into context (e.g., compared with other findings in the literature ), and its importance is assigned.
• In the conclusion section, the results and the main conclusions are summarized.

A thesis is the most crucial document that you will write during your academic studies. For professional thesis editing and thesis proofreading services , visit Enago Thesis Editing for more information.

Editor’s pick

Get free updates.

Subscribe to our newsletter for regular insights from the research and publishing industry!

Review Checklist

Have you  completed all data collection procedures and analyzed all results ?

Have you  included all results relevant to your thesis question, even if they do not support your hypothesis?

Have you reported the results  objectively , with no interpretation or speculation?

For quantitative research, have you included both  descriptive and  inferential statistical results and stated whether they support or contradict your hypothesis?

Have you used  tables and figures to present all results?

In your thesis body, have you presented only the pertinent results and elaborated on specific aspects that were presented in the tables and figures?

Are all tables and figures  correctly labeled and cited in numerical order in the text?

Frequently Asked Questions

What file formats do you accept +.

We accept all file formats, including Microsoft Word, Microsoft Excel, PDF, Latex, etc.

How to identify whether paraphrasing is required? +

We provide a report entailing recommendations for a single Plagiarism Check service. You can also write to us at [email protected] for further assistance as paraphrasing is sold offline and has a relatively high conversion in most geographies. 

What information do i need to provide? +

Please upload your research manuscript when you place the order. If you want to include the tables, charts, and figure legends in the plagiarism check, please ensure that all content is in editable formats and in one single document. 

Is repetition percentage of 25-30% considered acceptable by the journal for my manuscript? +

Acceptable repetition rate varies by journal but aim for low percentages (usually <5%). Avoid plagiarism, cite sources, and use detection tools. High plagiarism can lead to rejection, reputation damage, and serious consequences. Consult your institution for guidance on addressing plagiarism concerns.

Do you offer help to rewrite and paraphrase the plagiarized text in my manuscript? +

We can certainly help you rewrite and paraphrase text in your manuscript to ensure it is not plagiarized under our Developmental Content rewriting service.  You can provide specific passages or sentences that you suspect may be plagiarized, and we can assist you in rephrasing them to ensure originality. 

Which international languages does iThenticate have content for in its database? +

iThenticate searches for content matches in the following 30 languages: Chinese (Simplified and Traditional), Japanese, Thai, Korean, Catalan, Croatian, Czech, Danish, Dutch, Finnish, French, German, Hungarian, Italian, Norwegian (Bokmal, Nynorsk), Polish, Portuguese, Romanian, Serbian, Slovak, Slovenian, Spanish, Swedish, Arabic, Greek, Hebrew, Farsi, Russian, and Turkish. Please note that iThenticate will match your text with text of the same language.

• LEARNING SKILLS
• Writing a Dissertation or Thesis
• Results and Discussion

Search SkillsYouNeed:

Learning Skills:

• A - Z List of Learning Skills
• What is Learning?
• Learning Approaches
• Learning Styles
• 8 Types of Learning Styles
• Understanding Your Preferences to Aid Learning
• Lifelong Learning
• Decisions to Make Before Applying to University
• Top Tips for Surviving Student Life
• Living Online: Education and Learning
• 8 Ways to Embrace Technology-Based Learning Approaches
• Critical Thinking Skills
• Critical Thinking and Fake News
• Understanding and Addressing Conspiracy Theories
• Critical Analysis
• Study Skills
• Exam Skills
• How to Write a Research Proposal
• Ethical Issues in Research
• Dissertation: The Introduction
• Researching and Writing a Literature Review
• Writing your Methodology
• Dissertation: Results and Discussion
• Dissertation: Conclusions and Extras

Writing Your Dissertation or Thesis eBook

Part of the Skills You Need Guide for Students .

• Research Methods
• Teaching, Coaching, Mentoring and Counselling
• Employability Skills for Graduates

Subscribe to our FREE newsletter and start improving your life in just 5 minutes a day.

You'll get our 5 free 'One Minute Life Skills' and our weekly newsletter.

We'll never share your email address and you can unsubscribe at any time.

Writing your Dissertation:  Results and Discussion

When writing a dissertation or thesis, the results and discussion sections can be both the most interesting as well as the most challenging sections to write.

You may choose to write these sections separately, or combine them into a single chapter, depending on your university’s guidelines and your own preferences.

There are advantages to both approaches.

Writing the results and discussion as separate sections allows you to focus first on what results you obtained and set out clearly what happened in your experiments and/or investigations without worrying about their implications.This can focus your mind on what the results actually show and help you to sort them in your head.

However, many people find it easier to combine the results with their implications as the two are closely connected.

Check your university’s requirements carefully before combining the results and discussions sections as some specify that they must be kept separate.

Results Section

The Results section should set out your key experimental results, including any statistical analysis and whether or not the results of these are significant.

You should cover any literature supporting your interpretation of significance. It does not have to include everything you did, particularly for a doctorate dissertation. However, for an undergraduate or master's thesis, you will probably find that you need to include most of your work.

You should write your results section in the past tense: you are describing what you have done in the past.

Every result included MUST have a method set out in the methods section. Check back to make sure that you have included all the relevant methods.

Conversely, every method should also have some results given so, if you choose to exclude certain experiments from the results, make sure that you remove mention of the method as well.

If you are unsure whether to include certain results, go back to your research questions and decide whether the results are relevant to them. It doesn’t matter whether they are supportive or not, it’s about relevance. If they are relevant, you should include them.

Having decided what to include, next decide what order to use. You could choose chronological, which should follow the methods, or in order from most to least important in the answering of your research questions, or by research question and/or hypothesis.

You also need to consider how best to present your results: tables, figures, graphs, or text. Try to use a variety of different methods of presentation, and consider your reader: 20 pages of dense tables are hard to understand, as are five pages of graphs, but a single table and well-chosen graph that illustrate your overall findings will make things much clearer.

Make sure that each table and figure has a number and a title. Number tables and figures in separate lists, but consecutively by the order in which you mention them in the text. If you have more than about two or three, it’s often helpful to provide lists of tables and figures alongside the table of contents at the start of your dissertation.

Summarise your results in the text, drawing on the figures and tables to illustrate your points.

The text and figures should be complementary, not repeat the same information. You should refer to every table or figure in the text. Any that you don’t feel the need to refer to can safely be moved to an appendix, or even removed.

Make sure that you including information about the size and direction of any changes, including percentage change if appropriate. Statistical tests should include details of p values or confidence intervals and limits.

While you don’t need to include all your primary evidence in this section, you should as a matter of good practice make it available in an appendix, to which you should refer at the relevant point.

For example:

Details of all the interview participants can be found in Appendix A, with transcripts of each interview in Appendix B.

You will, almost inevitably, find that you need to include some slight discussion of your results during this section. This discussion should evaluate the quality of the results and their reliability, but not stray too far into discussion of how far your results support your hypothesis and/or answer your research questions, as that is for the discussion section.

See our pages: Analysing Qualitative Data and Simple Statistical Analysis for more information on analysing your results.

Discussion Section

This section has four purposes, it should:

• Interpret and explain your results
• Answer your research question
• Justify your approach
• Critically evaluate your study

The discussion section therefore needs to review your findings in the context of the literature and the existing knowledge about the subject.

You also need to demonstrate that you understand the limitations of your research and the implications of your findings for policy and practice. This section should be written in the present tense.

The Discussion section needs to follow from your results and relate back to your literature review . Make sure that everything you discuss is covered in the results section.

Some universities require a separate section on recommendations for policy and practice and/or for future research, while others allow you to include this in your discussion, so check the guidelines carefully.

Starting the Task

Most people are likely to write this section best by preparing an outline, setting out the broad thrust of the argument, and how your results support it.

You may find techniques like mind mapping are helpful in making a first outline; check out our page: Creative Thinking for some ideas about how to think through your ideas. You should start by referring back to your research questions, discuss your results, then set them into the context of the literature, and then into broader theory.

This is likely to be one of the longest sections of your dissertation, and it’s a good idea to break it down into chunks with sub-headings to help your reader to navigate through the detail.

Fleshing Out the Detail

Once you have your outline in front of you, you can start to map out how your results fit into the outline.

This will help you to see whether your results are over-focused in one area, which is why writing up your research as you go along can be a helpful process. For each theme or area, you should discuss how the results help to answer your research question, and whether the results are consistent with your expectations and the literature.

The Importance of Understanding Differences

If your results are controversial and/or unexpected, you should set them fully in context and explain why you think that you obtained them.

Your explanations may include issues such as a non-representative sample for convenience purposes, a response rate skewed towards those with a particular experience, or your own involvement as a participant for sociological research.

You do not need to be apologetic about these, because you made a choice about them, which you should have justified in the methodology section. However, you do need to evaluate your own results against others’ findings, especially if they are different. A full understanding of the limitations of your research is part of a good discussion section.

At this stage, you may want to revisit your literature review, unless you submitted it as a separate submission earlier, and revise it to draw out those studies which have proven more relevant.

Conclude by summarising the implications of your findings in brief, and explain why they are important for researchers and in practice, and provide some suggestions for further work.

You may also wish to make some recommendations for practice. As before, this may be a separate section, or included in your discussion.

The results and discussion, including conclusion and recommendations, are probably the most substantial sections of your dissertation. Once completed, you can begin to relax slightly: you are on to the last stages of writing!

Continue to: Dissertation: Conclusion and Extras Writing your Methodology

See also: Writing a Literature Review Writing a Research Proposal Academic Referencing What Is the Importance of Using a Plagiarism Checker to Check Your Thesis?

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings? In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Research Voyage

Research Tips and Infromation

How to Write the Results Section of your Dissertation or Thesis?

Introduction

Organizing your results, providing context, presenting the data in results section, describing statistical analysis, reporting the findings in results section, supporting the findings, visual representation in results section.

As you progress on your journey towards completing your PhD or Post Graduate dissertation, one of the most critical sections that holds immense significance is the results section.

Results section serves as the pinnacle of your research, where you unveil the outcomes of your exhaustive efforts and shed light on the answers to your research questions. In this blog post, we will delve into the intricacies of the results section and explore how to effectively present and interpret your findings to leave a lasting impact.

Whether you’re conducting research in the field of biology, psychology, computer science, or any other discipline, the results section is where your data takes center stage. It is a space where you showcase your meticulous analysis, statistical methods, and the discoveries you’ve made along the way. By understanding the key components and best practices for constructing a compelling results section, you can present your findings in a manner that resonates with both your academic peers and the wider research community.

In this comprehensive guide, we will walk you through the fundamental elements of the results section, from organizing your data to choosing the appropriate visual representations. We will explore the importance of clear and concise reporting, emphasizing the significance of providing contextual information and highlighting any unexpected or groundbreaking discoveries.

Furthermore, we will discuss strategies for effectively interpreting your results, discussing their implications, and connecting them back to your research objectives. By mastering these skills, you will be able to demonstrate the significance of your work, contribute to the existing body of knowledge, and potentially pave the way for further research in your field.

Throughout the blog post, I will provide concrete examples from various disciplines to illustrate the implementation of these techniques. Additionally, I will offer valuable tips on avoiding common pitfalls, ensuring the accuracy and reliability of your results, and seeking feedback from your advisors or peers to enhance the quality of your analysis.

If you are in paucity of time, not confident of your writing skills and in a hurry to complete the writing task then you can think of hiring a research consultant that solves all your problems. Please visit my article on Hiring a Research consultant for your PhD tasks for further details.

Organizing the results of your study in a logical and coherent manner is crucial for effectively communicating your findings. By presenting your results in an organized structure, you enhance the clarity and readability of your dissertation. Here are some key considerations for organizing your results:

• Research studies often involve complex algorithms, software implementations, experimental data, and performance metrics. It is essential to organize these diverse elements in a cohesive manner to make it easier for readers to follow your research. A well-structured results section enables readers to understand the progression of your experiments and the relationship between different findings.
• Begin by reminding readers of the research questions or hypotheses that guided your study. This alignment helps establish a clear connection between the objectives of your research and the subsequent presentation of results. For example, if your research question focuses on evaluating the efficiency of a new sorting algorithm, you would present the experimental data, performance metrics, and comparative analyses specific to that algorithm in relation to the research question.
• Subsubsection 1.1: Experimental Setup
• Subsubsection 1.2: Experimental Results and Analysis
• Subsubsection 2.1: Performance Metrics
• Subsubsection 2.2: Comparative Results and Discussion

Remember to tailor the organization of your results section to the specific requirements of your research. The key is to provide a logical flow and structure that enables readers to easily comprehend and interpret your findings.

Providing context for the results of your study is essential to help readers understand the significance and implications of your findings. By offering background information and study design details, you establish a foundation upon which the results can be properly interpreted. Here are some key considerations for providing context:

• Before delving into the results, it is important to provide readers with relevant background information about the topic or problem being addressed. This may include a literature review of existing research, theories, or methodologies in the field. By doing so, you situate your work within the broader landscape of and demonstrate its relevance. Additionally, explain the design of your study, such as the specific algorithms, software frameworks, datasets, or hardware setups used. This ensures that readers understand the context in which your results were obtained.
• Provide a brief overview of the current state-of-the-art in image recognition algorithms and their limitations.
• Explain the specific challenges or gaps in the existing methods that motivated your research.
• Describe the design of your study, including the choice of machine learning techniques, datasets used for training and evaluation, preprocessing steps, and any hardware or software configurations.

By providing context, you allow readers to understand the background, motivation, and methodology behind your research. This sets the stage for better comprehension and interpretation of your results. Contextualizing your findings, as it helps establish the relevance, novelty, and potential impact of your research within the larger field.

Presenting data in a clear and organized manner is crucial for effectively communicating your results. The way you present your data can greatly impact the reader’s understanding and interpretation of your findings. Here are some key considerations for presenting data:

• Presenting performance metrics of different algorithms using a table to allow for easy comparison.
• Using a line graph to depict the improvement in accuracy over training iterations in a machine learning model.
• Employing a bar chart to compare the execution times of different algorithms on a specific dataset.
• Clear labelling and formatting of your data ensure that readers can easily understand and interpret the information presented. Label each table, figure, chart, or graph with a concise and descriptive title. Ensure that axes, legends, and labels are clearly labelled and units of measurement are specified. Use appropriate fonts, colours, and styles to enhance readability. Consider providing captions or footnotes to provide additional context or explanations where necessary.
• In the text, refer to a specific table presenting the accuracy results of different algorithms and explain how these results support your research hypothesis or contribute to the field.
• Discuss a figure showing the relationship between the number of training examples and the performance of a machine learning model, emphasizing its implications for scalability and generalization.

By presenting data in a visually appealing and well-organized manner, you enhance the clarity and accessibility of your results. Proper labelling, formatting, and referring to each table or figure in the text help readers navigate the information and grasp its significance. Remember to choose the most appropriate format for your data and use visuals to support and reinforce your findings.

The inclusion of statistical analyses in the results section is crucial for providing objective and quantitative evidence to support your findings. Statistical analyses help you draw meaningful conclusions from your data and determine the significance of observed results. Here are some key considerations for describing statistical analyses:

• Statistical analyses play a vital role in determining the reliability and significance of your findings. They provide a systematic and objective framework for interpreting the data and testing hypotheses. Discuss the importance of including statistical analyses in the results section to demonstrate the rigour and validity of your research.
• Describe using a t-test to compare the means of two groups in a user study, as it is appropriate for assessing the statistical significance of differences.
• Explain employing logistic regression to model the relationship between independent variables and a binary outcome in a predictive analytics study.
• Report the p-value as 0.032, indicating a statistically significant difference between the two groups at the 0.05 significance level.
• Interpret an effect size of 0.40 as a medium-sized effect, highlighting its practical importance in the context of the research.

By describing the statistical analyses conducted, explaining the rationale behind the chosen tests, and accurately presenting the statistical values and interpretations, you strengthen the validity and reliability of your findings. Statistical analyses provide an objective framework for drawing conclusions from your data and lend credibility to your research in the computer science domain.

Reporting the findings of your research in an objective, concise, and clear manner is essential for effectively communicating your results. Here are some key considerations for reporting the findings:

• Summarize the key findings of a machine learning study by stating that “the proposed algorithm achieved an average accuracy of 85% on the test dataset, outperforming existing state-of-the-art methods by 10%.”
• For a research question about the impact of different programming languages on software performance, present specific metrics such as execution time or memory usage for each language, along with a comparison and interpretation of the results.
• Instead of using overly technical language, communicate the results in a more accessible way: “The experimental results showed a significant correlation between the number of training samples and the accuracy of the model, indicating that a larger training dataset leads to improved prediction performance.”

By guiding readers on summarizing the results objectively and concisely, addressing each research question or hypothesis, and using clear and concise language, you ensure that your findings are communicated effectively. This approach allows readers to understand the core contributions of your research and how they align with the research questions or hypotheses you set out to investigate.

Providing strong evidence from the data to support your findings, addressing unexpected or contradictory results, and discussing limitations and potential explanations are essential components of reporting research findings. Here are some key considerations for supporting the findings:

• Present empirical evidence from a user study, such as participant feedback or performance metrics, to support the usability and effectiveness of a proposed user interface design.
• If a software system performed unexpectedly poorly in certain scenarios, discuss potential factors such as data bias, implementation issues, or limitations of the evaluation methodology that could have influenced the results.
• Acknowledge limitations such as a small sample size, limited dataset availability, or computational constraints that might affect the generalizability or robustness of the results.
• Discuss potential explanations for unexpected results, such as issues with data quality, algorithmic complexity, or model assumptions.

By providing evidence from the data to support the findings, addressing unexpected or contradictory results, and discussing limitations and potential explanations, you demonstrate a rigorous and reflective approach to your research in the computer science domain. This allows readers to assess the strength and reliability of your findings and gain a deeper understanding of the nuances and implications of your work.

Using visual representations, such as tables, graphs, and figures, alongside the text can greatly enhance the understanding and impact of your findings. Here are some key considerations for visual representation:

Visual representations offer several benefits in presenting research findings. They provide a concise and intuitive way to convey complex information, trends, and patterns. Visuals can help readers grasp key insights at a glance, enhance the overall readability of the document, and make the findings more memorable. Visual representations also facilitate effective comparisons, highlight important relationships, and aid in storytelling. Example:

When creating visual representations, consider the following tips to ensure clarity and effectiveness: a. Choose the appropriate visual format: Select the most suitable format, such as tables, line graphs, scatter plots, or heatmaps, based on the nature of the data and the message you want to convey.

b. Simplify and declutter: Avoid overwhelming the visuals with excessive data points, labels, or unnecessary decorations. Keep the design clean and focused on conveying the essential information.

c. Label and title clearly: Provide descriptive and informative titles for tables, graphs, and figures. Label the axes, data points, or components clearly to facilitate understanding.

d. Use colors and visual cues purposefully: Utilize colors and visual cues to highlight important information or differentiate between categories. Ensure that the chosen colors are distinguishable and accessible. e. Provide legends and captions: Include legends to explain symbols, colors, or abbreviations used in the visuals. Provide informative captions or annotations to guide readers in interpreting the visuals accurately. Example:

By incorporating clear and effective visual representations alongside the text, you enhance the presentation and understanding of your research findings in the computer science domain. Well-designed tables, graphs, and figures can simplify complex information, facilitate comparisons, and enhance the visual appeal of your dissertation. Remember to choose appropriate formats, keep the visuals uncluttered, label clearly, and use colors and visual cues purposefully to maximize their impact.

Writing the results section of a dissertation or thesis is a critical task that requires careful attention to detail, organization, and effective communication. Throughout this blog post, we have explored key elements to consider when crafting this section.

Upcoming Events

• Visit the Upcoming International Conferences at Exotic Travel Destinations with Travel Plan
• Visit for  Research Internships Worldwide

Recent Posts

• 04 Reasons for Outsourcing Academic Conference Management
• How to Put Research Grants on Your CV ?
• How to Request for Journal Publishing Charge (APC) Discount or Waiver?
• Do Review Papers Count for the Award of a PhD Degree?
• Vinay Kabadi, University of Melbourne, Interview on Award-Winning Research
• All Blog Posts
• Research Career
• Research Conference
• Research Internship
• Research Journal
• Research Tools
• Uncategorized
• Research Conferences
• Research Journals
• Research Grants
• Internships
• Research Internships
• Email Templates
• Conferences
• Blog Partners
• Privacy Policy

Copyright © 2024 Research Voyage

Design by ThemesDNA.com

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write a Results Section for a Dissertation or Research Paper: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write a Results Section for a Dissertation or Research Paper: Guide & Examples

Table of contents

Use our free Readability checker

A results section is a crucial part of a research paper or dissertation, where you analyze your major findings. This section goes beyond simply presenting study outcomes. You should also include a comprehensive statistical analysis and interpret the collected data in detail.

Without dissertation research results, it is impossible to imagine a scientific work. Your task here is to present your study findings. What are qualitative or quantitative indicators? How to use tables and diagrams? How to describe data? Our article answers all these questions and many more. So, read further to discover how to analyze and describe your research indexes or contact or professionals for dissertation help from StudyCrumb.

What Is a Results Section of Dissertation?

The results section of a dissertation is a data statement from your research. Here you should present the main findings of your study to your readers. This section aims to show information objectively, systematically, concisely. It is allowed using text supplemented with illustrations.  In general, this section's length is not limited but should include all necessary data. Interpretations or conclusions should not be included in this section. Therefore, in theory, this is one of your shortest sections. But it can also be one of the most challenging sections.  The introduction presents a research topic and answers the question "why?". The Methods section explains the data collection process and answers "how?". Meanwhile, the result section shows actual data gained from experiments and tells "what?" Thus, this part plays a critical role in highlighting study's relevance. This chapter gives reader study relevance with novelty. So, you should figure out how to write it correctly. Here are main tasks that you should keep in mind while writing:

• Results answer the question "What was found in your research?"
• Results contain only your study's outcome. They do not include comments or interpretations.
• Results must always be presented accurately & objectively.
• Tables & figures are used to draw readers' attention. But the same data should never be presented in the form of a table and a figure. Don't repeat anything from a table also in text.

Dissertation: Results vs Discussion vs Conclusion

Results and discussion sections of a dissertation are often confused among researchers. Sometimes both these parts are mixed up with a conclusion for thesis . Figured out what is covered in each of these important chapters. Your readers should see that you notice how different they are. A clear understanding of differences will help you write your dissertation more effectively. 5 differences between Results VS Discussion VS Conclusion:

Wanna figure out the actual difference between discussion vs conclusion? Check out our helpful articles about Dissertation Discussion or Dissertation Conclusion.

Present Your Findings When Writing Results Section of Dissertation

Now it's time to understand how to arrange the results section of the dissertation. First, present most general findings, then narrow it down to a more specific one. Describe both qualitative & quantitative results. For example, imagine you are comparing the behavior of hamsters and mice. First, say a few words about the behavioral type of mammals that you studied. Then, mention rodents in general. At end, describe specific species of animals you carried out an experiment on.

Qualitative Results Section in Dissertation

In your dissertation results section, qualitative data may not be directly related to specific sub-questions or hypotheses. You can structure this chapter around main issues that arise when analyzing data. For each question, make a general observation of what data show. For example, you may recall recurring agreements or differences, patterns, trends. Personal answers are the basis of your research. Clarify and support these views with direct quotes. Add more information to the thesis appendix if it's needed.

Quantitative Results Section in a Dissertation

The easiest way to write a quantitative dissertation results section is to build it around a sub-question or hypothesis of your research. For each subquery, provide relevant results and include statistical analysis . Then briefly evaluate importance & reliability. Notice how each result relates to the problem or whether it supports the hypothesis. Focus on key trends, differences, and relationships between data. But don't speculate about their meaning or consequences. This should be put in the discussion vs conclusion section. Suppose your results are not directly related to answering your questions. Maybe there is additional information that helps readers understand how you collect data. In that case, you can include them in the appendix. It is often helpful to include visual elements such as graphs, charts, and tables. But only if they accurately support your results and add value.

Tables and Figures in Results Section in Dissertation

We recommend you use tables or figures in the dissertation results section correctly. Such interpretation can effectively present complex data concisely and visually. It allows readers to quickly gain a statistical overview. On the contrary, poorly designed graphs can confuse readers. That will reduce the effectiveness of your article.  Here are our recommendations that help you understand how to use tables and figures:

• Make sure tables and figures are self-explanatory. Sometimes, your readers may look at tables and figures before reading the entire text. So they should make sense as separate elements.
• Do not repeat the content of tables and figures in text. Text can be used to highlight key points from tables and figures. But do not repeat every element.
• Make sure that values ​​or information in tables and text are consistent. Make sure that abbreviations, group names, interpretations are the same as in text.
• Use clear, informative titles for tables and figures. Do not leave any table or figure without a title or legend. Otherwise, readers will not be able to understand data's meaning. Also, make sure column names, labels, figures are understandable.
• Check accuracy of data presented in tables and figures. Always double-check tables and figures to make sure numbers converge.
• Tables should not contain redundant information. Make sure tables in the article are not too crowded. If you need to provide extensive data, use Appendixes.
• Make sure images are clear. Make sure images and all parts of drawings are precise. Lettering should be in a standard font and legible against the background of the picture.
• Ask for permission to use illustrations. If you use illustrations, be sure to ask copyright holders and indicate them.

Tips on How to Write a Results Section

We have prepared several tips on how to write the results section of the dissertation!  Present data collected during study objectively, logically, and concisely. Highlight most important results and organize them into specific sections. It is an excellent way to show that you have covered all the descriptive information you need. Correct usage of visual elements effectively helps your readers with understanding. So, follow main 3 rules for writing this part:

• State only actual results. Leave explanations and comments for Discussion.
• Use text, tables, and pictures to orderly highlight key results.
• Make sure that contents of tables and figures are not repeated in text.

In case you have questions about a  conceptual framework in research , you will find a blog dedicated to this issue in our database.

What to Avoid When Writing the Results Section of a Dissertation

Here we will discuss how NOT to write the results section of a dissertation. Or simply, what points to avoid:

• Do not make your research too complicated. Your paper, tables, and graphs should be clearly marked and follow order. So that they can exist independently without further explanation.
• Do not include raw data. Remember, you are summarizing relevant results, not reporting them in detail. This chapter should briefly summarize your findings. Avoid complete introduction to each number and calculation.
• Do not contradict errors or false results. Explain these errors and contradictions in conclusions. This often happens when different research methods have been used.
• Do not write a conclusion or discussion. Instead, this part should contain summaries of findings.
• Do not tend to include explanations and inferences from results. Such an approach can make this chapter subjective, unclear, and confusing to the reader.
• Do not forget about novelty. Its lack is one of the main reasons for the paper's rejection.

Dissertation Results Section Example

Let's take a look at some good results section of dissertation examples. Remember that this part shows fundamental research you've done in detail. So, it has to be clear and concise, as you can see in the sample.

Final Thoughts on Writing Results Section of Dissertation

When writing a results section of a dissertation, highlight your achievements by data. The main chapter's task is to convince the reader of conclusions' validity of your research. You should not overload text with too detailed information. Never use words whose meanings you do not understand. Also, oversimplification may seem unconvincing for readers. But on the other hand, writing this part can even be fun. You can directly see your study results, which you'll interpret later. So keep going, and we wish you courage!

Writing any academic paper is long and thorough work. But StudyCrumb got you back! Our professional writers will deliver any type of work quickly and excellently! 

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Writing a scientific paper.

• Writing a lab report
• INTRODUCTION

Writing a "good" results section

Figures and Captions in Lab Reports

"Results Checklist" from: How to Write a Good Scientific Paper. Chris A. Mack. SPIE. 2018.

Additional tips for results sections.

• LITERATURE CITED
• Bibliography of guides to scientific writing and presenting
• Peer Review
• Presentations
• Lab Report Writing Guides on the Web

This is the core of the paper. Don't start the results sections with methods you left out of the Materials and Methods section. You need to give an overall description of the experiments and present the data you found.

• Factual statements supported by evidence. Short and sweet without excess words
• Present representative data rather than endlessly repetitive data
• Discuss variables only if they had an effect (positive or negative)
• Use meaningful statistics
• Avoid redundancy. If it is in the tables or captions you may not need to repeat it

A short article by Dr. Brett Couch and Dr. Deena Wassenberg, Biology Program, University of Minnesota

• Present the results of the paper, in logical order, using tables and graphs as necessary.
• Explain the results and show how they help to answer the research questions posed in the Introduction. Evidence does not explain itself; the results must be presented and then explained. 
• Avoid: presenting results that are never discussed;  presenting results in chronological order rather than logical order; ignoring results that do not support the conclusions; 
• Number tables and figures separately beginning with 1 (i.e. Table 1, Table 2, Figure 1, etc.).
• Do not attempt to evaluate the results in this section. Report only what you found; hold all discussion of the significance of the results for the Discussion section.
• It is not necessary to describe every step of your statistical analyses. Scientists understand all about null hypotheses, rejection rules, and so forth and do not need to be reminded of them. Just say something like, "Honeybees did not use the flowers in proportion to their availability (X2 = 7.9, p<0.05, d.f.= 4, chi-square test)." Likewise, cite tables and figures without describing in detail how the data were manipulated. Explanations of this sort should appear in a legend or caption written on the same page as the figure or table.
• You must refer in the text to each figure or table you include in your paper.
• Tables generally should report summary-level data, such as means ± standard deviations, rather than all your raw data.  A long list of all your individual observations will mean much less than a few concise, easy-to-read tables or figures that bring out the main findings of your study.  
• Only use a figure (graph) when the data lend themselves to a good visual representation.  Avoid using figures that show too many variables or trends at once, because they can be hard to understand.

From:  https://writingcenter.gmu.edu/guides/imrad-results-discussion

• << Previous: METHODS
• Next: DISCUSSION >>
• Last Updated: Aug 4, 2023 9:33 AM
• URL: https://guides.lib.uci.edu/scientificwriting

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2023 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

How to Write an APA Results Section

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Emily is a board-certified science editor who has worked with top digital publishing brands like Voices for Biodiversity, Study.com, GoodTherapy, Vox, and Verywell.

Verywell / Nusha Ashjaee 

What to Include in an APA Results Section

• Justify Claims
• Summarize Results

Report All Relevant Results

• Report Statistical Findings

Include Tables and Figures

What not to include in an apa results section.

Psychology papers generally follow a specific structure. One important section of a paper is known as the results section. An APA results section of a psychology paper summarizes the data that was collected and the statistical analyses that were performed. The goal of this section is to report the results of your study or experiment without any type of subjective interpretation.

At a Glance

The results section is a vital part of an APA paper that summarizes a study's findings and statistical analysis. This section often includes descriptive text, tables, and figures to help summarize the findings. The focus is purely on summarizing and presenting the findings and should not include any interpretation, since you'll cover that in the subsequent discussion section.

This article covers how to write an APA results section, including what to include and what to avoid.

The results section is the third section of a psychology paper. It will appear after the introduction and methods sections and before the discussion section.

The results section should include:

• A summary of the research findings.
• Information about participant flow, recruitment, retention, and attrition. If some participants started the study and later left or failed to complete the study, then this should be described. 
• Information about any reasons why some data might have been excluded from the study. 
• Statistical information including samples sizes and statistical tests that were used. It should report standard deviations, p-values, and other measures of interest.

Results Should Justify Your Claims

Report data in order to sufficiently justify your conclusions. Since you'll be talking about your own interpretation of the results in the discussion section, you need to be sure that the information reported in the results section justifies your claims.

When you start writing your discussion section, you can then look back on your results to ensure that all the data you need are there to fully support your conclusions. Be sure not to make claims in your discussion section that are not supported by the findings described in your results section.

Summarize Your Results

Remember, you are summarizing the results of your psychological study, not reporting them in full detail. The results section should be a relatively brief overview of your findings, not a complete presentation of every single number and calculation.

If you choose, you can create a supplemental online archive where other researchers can access the raw data if they choose.

How long should a results section be?

The length of your results section will vary depending on the nature of your paper and the complexity of your research. In most cases, this will be the shortest section of your paper.

Just as the results section of your psychology paper should sufficiently justify your claims, it should also provide an accurate look at what you found in your study. Be sure to mention all relevant information.

Don't omit findings simply because they failed to support your predictions.

Your hypothesis may have expected more statistically significant results or your study didn't support your hypothesis , but that doesn't mean that the conclusions you reach are not useful. Provide data about what you found in your results section, then save your interpretation for what the results might mean in the discussion section.

While your study might not have supported your original predictions, your finding can provide important inspiration for future explorations into a topic.

How is the results section different from the discussion section?

The results section provides the results of your study or experiment. The goal of the section is to report what happened and the statistical analyses you performed. The discussion section is where you will examine what these results mean and whether they support or fail to support your hypothesis.

Report Your Statistical Findings

Always assume that your readers have a solid understanding of statistical concepts. There's no need to explain what a t-test is or how a one-way ANOVA works. Your responsibility is to report the results of your study, not to teach your readers how to analyze or interpret statistics.

Include Effect Sizes

The Publication Manual of the American Psychological Association recommends including effect sizes in your results section so that readers can appreciate the importance of your study's findings.

Your results section should include both text and illustrations. Presenting data in this way makes it easier for readers to quickly look at your results.

Structure your results section around tables or figures that summarize the results of your statistical analysis. In many cases, the easiest way to accomplish this is to first create your tables and figures and then organize them in a logical way. Next, write the summary text to support your illustrative materials.

Only include tables and figures if you are going to talk about them in the body text of your results section.

In addition to knowing what you should include in the results section of your psychology paper, it's also important to be aware of things that you should avoid putting in this section:

Cause-and-Effect Conclusions

Don't draw cause-effect conclusions. Avoid making any claims suggesting that your result "proves" that something is true. 

Interpretations

Present the data without editorializing it. Save your comments and interpretations for the discussion section of your paper. 

Statistics Without Context

Don't include statistics without narration. The results section should not be a numbers dump. Instead, you should sequentially narrate what these numbers mean.

Don't include the raw data in the results section. The results section should be a concise presentation of the results. If there is raw data that would be useful, include it in the appendix .

Don't only rely on descriptive text. Use tables and figures to present these findings when appropriate. This makes the results section easier to read and can convey a great deal of information quickly.

Repeated Data

Don't present the same data twice in your illustrative materials. If you have already presented some data in a table, don't present it again in a figure. If you have presented data in a figure, don't present it again in a table.

All of Your Findings

Don't feel like you have to include everything. If data is irrelevant to the research question, don't include it in the results section.

But Don't Skip Relevant Data

Don't leave out results because they don't support your claims. Even if your data does not support your hypothesis, including it in your findings is essential if it's relevant.

More Tips for Writing a Results Section

If you are struggling, there are a few things to remember that might help:

• Use the past tense . The results section should be written in the past tense.
• Be concise and objective . You will have the opportunity to give your own interpretations of the results in the discussion section.
• Use APA format . As you are writing your results section, keep a style guide on hand. The Publication Manual of the American Psychological Association is the official source for APA style.
• Visit your library . Read some journal articles that are on your topic. Pay attention to how the authors present the results of their research.
• Get a second opinion . If possible, take your paper to your school's writing lab for additional assistance.

What This Means For You

Remember, the results section of your paper is all about providing the data from your study. This section is often the shortest part of your paper, and in most cases, the most clinical.

Be sure not to include any subjective interpretation of the results. Simply relay the data in the most objective and straightforward way possible. You can then provide your own analysis of what these results mean in the discussion section of your paper.

Bavdekar SB, Chandak S. Results: Unraveling the findings . J Assoc Physicians India . 2015 Sep;63(9):44-6. PMID:27608866.

Snyder N, Foltz C, Lendner M, Vaccaro AR. How to write an effective results section .  Clin Spine Surg . 2019;32(7):295-296. doi:10.1097/BSD.0000000000000845

American Psychological Association.  Publication Manual of the American Psychological Association  (7th ed.). Washington DC: The American Psychological Association; 2019.

Purdue Online Writing Lab. APA sample paper: Experimental psychology .

Berkeley University. Reviewing test results .

Tuncel A, Atan A. How to clearly articulate results and construct tables and figures in a scientific paper ? Turk J Urol . 2013;39(Suppl 1):16-19. doi:10.5152/tud.2013.048

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write a Discussion Section | Tips & Examples

How to Write a Discussion Section | Tips & Examples

Published on 21 August 2022 by Shona McCombes . Revised on 25 October 2022.

The discussion section is where you delve into the meaning, importance, and relevance of your results .

It should focus on explaining and evaluating what you found, showing how it relates to your literature review , and making an argument in support of your overall conclusion . It should not be a second results section .

There are different ways to write this section, but you can focus your writing around these key elements:

• Summary: A brief recap of your key results
• Interpretations: What do your results mean?
• Implications: Why do your results matter?
• Limitations: What can’t your results tell us?
• Recommendations: Avenues for further studies or analyses

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

What not to include in your discussion section, step 1: summarise your key findings, step 2: give your interpretations, step 3: discuss the implications, step 4: acknowledge the limitations, step 5: share your recommendations, discussion section example.

There are a few common mistakes to avoid when writing the discussion section of your paper.

• Don’t introduce new results: You should only discuss the data that you have already reported in your results section .
• Don’t make inflated claims: Avoid overinterpretation and speculation that isn’t directly supported by your data.
• Don’t undermine your research: The discussion of limitations should aim to strengthen your credibility, not emphasise weaknesses or failures.

Prevent plagiarism, run a free check.

Start this section by reiterating your research problem  and concisely summarising your major findings. Don’t just repeat all the data you have already reported – aim for a clear statement of the overall result that directly answers your main  research question . This should be no more than one paragraph.

Many students struggle with the differences between a discussion section and a results section . The crux of the matter is that your results sections should present your results, and your discussion section should subjectively evaluate them. Try not to blend elements of these two sections, in order to keep your paper sharp.

• The results indicate that …
• The study demonstrates a correlation between …
• This analysis supports the theory that …
• The data suggest  that …

The meaning of your results may seem obvious to you, but it’s important to spell out their significance for your reader, showing exactly how they answer your research question.

The form of your interpretations will depend on the type of research, but some typical approaches to interpreting the data include:

• Identifying correlations , patterns, and relationships among the data
• Discussing whether the results met your expectations or supported your hypotheses
• Contextualising your findings within previous research and theory
• Explaining unexpected results and evaluating their significance
• Considering possible alternative explanations and making an argument for your position

You can organise your discussion around key themes, hypotheses, or research questions, following the same structure as your results section. Alternatively, you can also begin by highlighting the most significant or unexpected results.

• In line with the hypothesis …
• Contrary to the hypothesised association …
• The results contradict the claims of Smith (2007) that …
• The results might suggest that x . However, based on the findings of similar studies, a more plausible explanation is x .

As well as giving your own interpretations, make sure to relate your results back to the scholarly work that you surveyed in the literature review . The discussion should show how your findings fit with existing knowledge, what new insights they contribute, and what consequences they have for theory or practice.

Ask yourself these questions:

• Do your results support or challenge existing theories? If they support existing theories, what new information do they contribute? If they challenge existing theories, why do you think that is?
• Are there any practical implications?

Your overall aim is to show the reader exactly what your research has contributed, and why they should care.

• These results build on existing evidence of …
• The results do not fit with the theory that …
• The experiment provides a new insight into the relationship between …
• These results should be taken into account when considering how to …
• The data contribute a clearer understanding of …
• While previous research has focused on  x , these results demonstrate that y .

Even the best research has its limitations. Acknowledging these is important to demonstrate your credibility. Limitations aren’t about listing your errors, but about providing an accurate picture of what can and cannot be concluded from your study.

Limitations might be due to your overall research design, specific methodological choices , or unanticipated obstacles that emerged during your research process.

Here are a few common possibilities:

• If your sample size was small or limited to a specific group of people, explain how generalisability is limited.
• If you encountered problems when gathering or analysing data, explain how these influenced the results.
• If there are potential confounding variables that you were unable to control, acknowledge the effect these may have had.

After noting the limitations, you can reiterate why the results are nonetheless valid for the purpose of answering your research question.

• The generalisability of the results is limited by …
• The reliability of these data is impacted by …
• Due to the lack of data on x , the results cannot confirm …
• The methodological choices were constrained by …
• It is beyond the scope of this study to …

Based on the discussion of your results, you can make recommendations for practical implementation or further research. Sometimes, the recommendations are saved for the conclusion .

Suggestions for further research can lead directly from the limitations. Don’t just state that more studies should be done – give concrete ideas for how future work can build on areas that your own research was unable to address.

• Further research is needed to establish …
• Future studies should take into account …
• Avenues for future research include …

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 25). How to Write a Discussion Section | Tips & Examples. Scribbr. Retrieved 9 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/discussion/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a results section | tips & examples, research paper appendix | example & templates, how to write a thesis or dissertation introduction.

• Manuscript Preparation

How to write the results section of a research paper

• 3 minute read
• 56.3K views

Table of Contents

At its core, a research paper aims to fill a gap in the research on a given topic. As a result, the results section of the paper, which describes the key findings of the study, is often considered the core of the paper. This is the section that gets the most attention from reviewers, peers, students, and any news organization reporting on your findings. Writing a clear, concise, and logical results section is, therefore, one of the most important parts of preparing your manuscript.

Difference between results and discussion

Before delving into how to write the results section, it is important to first understand the difference between the results and discussion sections. The results section needs to detail the findings of the study. The aim of this section is not to draw connections between the different findings or to compare it to previous findings in literature—that is the purview of the discussion section. Unlike the discussion section, which can touch upon the hypothetical, the results section needs to focus on the purely factual. In some cases, it may even be preferable to club these two sections together into a single section. For example, while writing  a review article, it can be worthwhile to club these two sections together, as the main results in this case are the conclusions that can be drawn from the literature.

Structure of the results section

Although the main purpose of the results section in a research paper is to report the findings, it is necessary to present an introduction and repeat the research question. This establishes a connection to the previous section of the paper and creates a smooth flow of information.

Next, the results section needs to communicate the findings of your research in a systematic manner. The section needs to be organized such that the primary research question is addressed first, then the secondary research questions. If the research addresses multiple questions, the results section must individually connect with each of the questions. This ensures clarity and minimizes confusion while reading.

Consider representing your results visually. For example, graphs, tables, and other figures can help illustrate the findings of your paper, especially if there is a large amount of data in the results.

Remember, an appealing results section can help peer reviewers better understand the merits of your research, thereby increasing your chances of publication.

Practical guidance for writing an effective results section for a research paper

• Always use simple and clear language. Avoid the use of uncertain or out-of-focus expressions.
• The findings of the study must be expressed in an objective and unbiased manner. While it is acceptable to correlate certain findings in the discussion section, it is best to avoid overinterpreting the results.
• If the research addresses more than one hypothesis, use sub-sections to describe the results. This prevents confusion and promotes understanding.
• Ensure that negative results are included in this section, even if they do not support the research hypothesis.
• Wherever possible, use illustrations like tables, figures, charts, or other visual representations to showcase the results of your research paper. Mention these illustrations in the text, but do not repeat the information that they convey.
• For statistical data, it is adequate to highlight the tests and explain their results. The initial or raw data should not be mentioned in the results section of a research paper.

The results section of a research paper is usually the most impactful section because it draws the greatest attention. Regardless of the subject of your research paper, a well-written results section is capable of generating interest in your research.

For detailed information and assistance on writing the results of a research paper, refer to Elsevier Author Services.

• Research Process

Writing a good review article

Why is data validation important in research?

You may also like.

Make Hook, Line, and Sinker: The Art of Crafting Engaging Introductions

Can Describing Study Limitations Improve the Quality of Your Paper?

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

6 Steps to Write an Excellent Discussion in Your Manuscript

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

The Clear Path to An Impactful Paper: ②

The Essentials of Writing to Communicate Research in Medicine

Changing Lines: Sentence Patterns in Academic Writing

Input your search keywords and press Enter.