phd research proposal example engineering

Written Thesis Proposal

Introduction.

The goal of this article is to help you to streamline your writing process and help convey your ideas in a concise, coherent, and clear way. The purpose of your proposal is to introduce, motivate, and justify the need for your research contributions. You want to communicate to your audience what your research will do ( vision ), why it is needed ( motivation ), how you will do it ( feasibility ).

Return to ToC

Before you start writing your proposal

A thesis proposal is different than most documents you have written. In a journal article, your narrative can be post-constructed based on your final data, whereas in a thesis proposal, you are envisioning a scientific story and anticipating your impact and results. Because of this, it requires a different approach to unravel your narration. Before you begin your actual writing process, it is a good idea to have (a) a perspective of the background and significance of your research, (b) a set of aims that you want to explore, and (c) a plan to approach your aims. However, the formation of your thesis proposal is often a nonlinear process. Going back and forth to revise your ideas and plans is not uncommon. In fact, this is a segue to approaching your very own thesis proposal, although a lot of time it feels quite the opposite.

Refer to “Where do I begin” article when in doubt. If you have a vague or little idea of the purpose and motivation of your work, one way is to remind yourself the aspects of the project that got you excited initially. You could refer to the “Where do I begin?” article to explore other ways of identifying the significance of your project.

Begin with an outline. It might be daunting to think about finishing a complete and coherent thesis proposal. Alternatively, if you choose to start with an outline first, you are going to have a stronger strategic perspective of the structure and content of your thesis proposal. An outline can serve as the skeleton of your proposal, where you can express the vision of your work, goals that you set for yourself to accomplish your thesis, your current status, and your future plan to explore the rest. If you don’t like the idea of an outline, you could remind yourself what strategy worked best for you in the past and adapt it to fit your needs.

Structure Diagram

Structure your thesis proposal

While some variation is acceptable, don’t stray too far from the following structure (supported by the Graduate Student Handbook). See also the Structure Diagram above.

• Cover Page. The cover page contains any relevant contact information for the committee and your project title. Try to make it look clean and professional.
• Specific Aims . The specific aims are the overview of the problem(s) that you plan to solve. Consider this as your one-minute elevator pitch on your vision for your research. It should succinctly (< 1 page) state your vision (the What), emphasize the purpose of your work (the Why), and provide a high-level summary of your research plans (the How).
• You don’t need to review everything! The point of the background is not to educate your audience, but rather to provide them with the tools needed to understand your proposal. A common pitfall is to explain all the research that you did to understand your topic and to demonstrate that you really know your information. Instead, provide enough evidence to show that you have done your reading. Cut out extraneous information. Be succinct.
• Start by motivating your project. Your background begins by addressing the motivation for your project. If you are having a hard time brainstorming the beginning of your background, try to organize your thoughts by writing down a list of bullet points about your research visions and the gap between current literature and your vision. They do not need to be in any order as they only serve to your needs. If you are unsure of how to motivate your audience, you can refer to the introductions of the key literatures where your proposal is based on, and see how your proposal fits in or extends their envisioned pictures. Another exercise to consider is to imagine: “What might happen if your work is successful?”  This will motivate your audience to understand your intent. Specifically, detailed contributions to help advance your field more manageable to undertake than vague high-level outcomes. For example, “Development of the proposed model will enable high-fidelity simulation of shear-induced crystallization” is a more specific and convincing motivation, compared to, “The field of crystallization modeling must be revolutionized in order to move forward.”

• Break down aims into tractable goals. The goal of your research plan is to explain your plans to approach the problem that you have identified. Here, you are extending your specific aims into a set of actionable plans. You can break down your aims into smaller, more tractable goals whose union can answer the lager scientific question you proposed. These smaller aims, or sub-aims, can appear in the form of individual sub-sections under each of your research aims.
• Reiterate your motivations. While you have already explained the purpose of your work in previous sections, it is still a good practice to reiterate them in the context of each sub-aim that you are proposing. This will inform your audience the motivation of each sub-aim and help them stay engaged.
• Describe a timely, actionable plan. Sometimes you might be tempted to write down every area that needs improvement. It is great to identify them; at the same time, you also need to decide on what set of tasks can you complete timely to make a measurable impact during your PhD. A timely plan now can save a lot of work a few years down the road.  Plan some specific reflection points when you’ll revisit the scope of your project and evaluate if changes are needed.  Some pre-determined “off-ramps” and “retooling” ideas will be very helpful as well, e.g., “Development of the model will rely on the experimental data of Reynold’s, however, modifications of existing correlations based on the validated data of von Karman can be useful as well.”
• Point your data to your plans. The preliminary data you have, data that others in your lab have collected, or even literature data can serve as initial steps you have taken. Your committee should not judge you based on how much or how perfect your data is. More important is to relate how your data have informed you to decide on your plans. Decide upon what data to include and point them towards your future plans.
• Name your backup plans. Make sure to consider back-up plans if everything doesn’t go as planned, because often it won’t. Try to consider which part of your plans are likely to fail and its consequence on the project trajectory. In addition, think about what alternative plans you can consider to “retune” your project. It is unlikely to predict exactly what hurdles you will encounter; however, thinking about alternatives early on will help you feel much better when you do.
• Safety. Provide a description of any relevant safety concerns with your project and how you will address them. This can include general and project-specific lab safety, PPE, and even workspace ergonomics and staying physical healthy if you are spending long days sitting at a desk or bending your back for a long time at your experimental workbench.
• Create the details of your timeline. The timeline can be broken down in the units of semester. Think about your plans to distribute your time in each sub-aims, and balance your research with classes, TA, and practice school. A common way to construct a timeline is called the Gantt Chart. There are templates that are available online where you can tailor them to fit your needs.
• References. This is a standard section listing references in the appropriate format, such as ACS format. The reference tool management software (e.g., Zotero, Endnote, Mendeley) that you are using should have prebuilt templates to convert any document you are citing to styles like ACS. If you do not already have a software tool, now is a good time to start.

Authentic, annotated, examples (AAEs)

These thesis proposals enabled the authors to successfully pass the qualifying exam during the 2017-2018 academic year.

Resources and Annotated Examples

Thesis proposal example 1, thesis proposal example 2.

School of Engineering

Guide to writing a research proposal for an engineering phd.

An important part of your PhD application is the research proposal so we want to know what your research interests are so that we may direct your application to potential supervisors. The proposal does not need be long, but the quality should be high and no more than 2-3 pages should be sufficient. Ideally your proposal should address the points below however as long as we get a clear idea of your research interests then we can consider your application.

• Ensure that your research interests match those in the School of Engineering.
• Outline the main objectives of your research, providing details of two or three key aspects.
• State your target audience for this project.
• Explain what the main outcomes of the project are that you would want to see.
• Outline what methods/approaches you intend to use to achieve the aims of your project.
• Indicate your suggested data collection procedures, including sources and any possible difficulties.
• Explain any analytical techniques you intend to use for your research.
• Broad research areas which would be unmanageable as a PhD topic or that have no relevance to the University of Warwick research areas.
• Vague descriptions of your research interests.

• Department of Materials Science and Engineering
• Postgraduate study

Writing a research proposal

The key feature of your PhD is that it is yours - the topic, planning, motivation, and thinking all come from you. It will be the most challenging type of academic work you have ever done, but also the most rewarding.

The Research Proposal – an outline

The research proposal constitutes the main way in which the department evaluates the potential quality of your PhD plans. The proposal should be approximately 1,500 words in length and include:

• A provisional title

Question or hypothesis

Value of the phd, existing literature, methods of work.

The title indicates the ‘headline’ character of the PhD. It should include any key concepts, empirical focus, or lines of inquiry that you aim to pursue. For example: ‘ High entropy alloys (HEAs) for fusion: Exploration of novel processing routes and HEA stability in extreme environments’, or ‘Tailoring the Thermomechanical Properties of High Performance Aerospace & Automotive Composite Materials’.

You can negotiate changes in the title with your supervisor should you be successful, but it's important to devise a title that describes what you aspire to research – and which looks original and exciting.

You need a question or hypothesis to drive the research forward. The question/hypothesis will provide your motivation; to answer the question or prove/disprove the hypothesis.

The question/hypothesis will need to be something that has not been posed before - this may involve looking at something that nobody has looked at before, or taking a fresh approach to an existing topic or issue.

The aims of your research should be a short list of answers to the question - what will the PhD do? So, for example ‘this PhD will explore...’ or ‘by carrying out this research, I will contribute to debates about...’. The aims are broader than the questions/hypotheses; they give a prospective statement about the overall destination of the PhD and its potential impact.

The value of the PhD follows closely from the aims. Think about how the ways it might improve our understanding of materials - a new process or the generation of new materials? To whom might the PhD be interesting - scholars looking at particular challenges, or specific industries?

A short note of key existing literature situates the PhD in existing research. Literature reviews are not simply descriptive mapping exercises at PhD level - you should identify a small number of key texts and say something about how these books are important for your research, and whether they support, extend, or challenge existing work.

The resources you require can vary according to the nature of your research: access to a particular archive, specialist library, visits to specialised equipment and facilities, the use of analytical software, access to databases, training, workshop attendance and so on. It's important to list any of these resources and give a very brief account of how they will enhance the PhD.

The methods of work is a particularly important section - it's where you can discuss how you will answer your question or prove your hypothesis. It's relatively easy to ask a new question; it is more challenging to set out how you might come up with a convincing answer!

The research also needs a  timetable . This should be set out over three years with clear indications of how long you will need to prepare for and carry out research (however defined) and allow time for writing up. Try to be as detailed as you can at this stage.

Each of these criteria helps the Department of Materials Science and Engineering selectors make a good judgement about your proposal. By following these criteria you will have your best chance of getting your proposal accepted.

Three more important points:

• Try to be concise. Don't write too much – be as specific as you can but not wordy. It is a difficult balance to strike.
• Bear in mind that the proposal is a starting point. If you are registered to read for a PhD you will be able to work the proposal through with your supervisor in more detail in the early months.
• Take a look at the department’s staff profiles. Can you identify possible supervisors and intellectual support networks within the department? The better able the department is to support your research, the better it will be for your proposal.

Search for PhD opportunities at Sheffield and be part of our world-leading research.

Writing a Competitive Preliminary Research Proposal for an Engineering Ph.D. Degree

Ieee account.

• Change Username/Password
• Update Address

Purchase Details

• Payment Options
• Order History
• View Purchased Documents

Profile Information

• Communications Preferences
• Profession and Education
• Technical Interests
• US & Canada: +1 800 678 4333
• Worldwide: +1 732 981 0060
• Contact & Support
• About IEEE Xplore
• Accessibility
• Terms of Use
• Nondiscrimination Policy
• Privacy & Opting Out of Cookies

A not-for-profit organization, IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity. © Copyright 2024 IEEE - All rights reserved. Use of this web site signifies your agreement to the terms and conditions.

Welcome to the on-line version of the UNC dissertation proposal collection. The purpose of this collection is to provide examples of proposals for those of you who are thinking of writing a proposal of your own. I hope that this on-line collection proves to be more difficult to misplace than the physical collection that periodically disappears. If you are preparing to write a proposal you should make a point of reading the excellent document The Path to the Ph.D., written by James Coggins. It includes advice about selecting a topic, preparing a proposal, taking your oral exam and finishing your dissertation. It also includes accounts by many people about the process that each of them went through to find a thesis topic. Adding to the Collection This collection of proposals becomes more useful with each new proposal that is added. If you have an accepted proposal, please help by including it in this collection. You may notice that the bulk of the proposals currently in this collection are in the area of computer graphics. This is an artifact of me knowing more computer graphics folks to pester for their proposals. Add your non-graphics proposal to the collection and help remedy this imbalance! There are only two requirements for a UNC proposal to be added to this collection. The first requirement is that your proposal must be completely approved by your committee. If we adhere to this, then each proposal in the collection serves as an example of a document that five faculty members have signed off on. The second requirement is that you supply, as best you can, exactly the document that your committee approved. While reading over my own proposal I winced at a few of the things that I had written. I resisted the temptation to change the document, however, because this collection should truely reflect what an accepted thesis proposal looks like. Note that there is no requirement that the author has finished his/her Ph.D. Several of the proposals in the collection were written by people who, as of this writing, are still working on their dissertation. This is fine! I encourage people to submit their proposals in any form they wish. Perhaps the most useful forms at the present are Postscript and HTML, but this may not always be so. Greg Coombe has generously provided LaTeX thesis style files , which, he says, conform to the 2004-2005 stlye requirements.

Many thanks to everyone who contributed to this collection!

Greg Coombe, "Incremental Construction of Surface Light Fields" in PDF . Karl Hillesland, "Image-Based Modelling Using Nonlinear Function Fitting on a Stream Architecture" in PDF . Martin Isenburg, "Compressing, Streaming, and Processing of Large Polygon Meshes" in PDF . Ajith Mascarenhas, "A Topological Framework for Visualizing Time-varying Volumetric Datasets" in PDF . Josh Steinhurst, "Practical Photon Mapping in Hardware" in PDF . Ronald Azuma, "Predictive Tracking for Head-Mounted Displays," in Postscript Mike Bajura, "Virtual Reality Meets Computer Vision," in Postscript David Ellsworth, "Polygon Rendering for Interactive Scientific Visualization on Multicomputers," in Postscript Richard Holloway, "A Systems-Engineering Study of the Registration Errors in a Virtual-Environment System for Cranio-Facial Surgery Planning," in Postscript Victoria Interrante, "Uses of Shading Techniques, Artistic Devices and Interaction to Improve the Visual Understanding of Multiple Interpenetrating Volume Data Sets," in Postscript Mark Mine, "Modeling From Within: A Proposal for the Investigation of Modeling Within the Immersive Environment" in Postscript Steve Molnar, "High-Speed Rendering using Scan-Line Image Composition," in Postscript Carl Mueller, " High-Performance Rendering via the Sort-First Architecture ," in Postscript Ulrich Neumann, "Direct Volume Rendering on Multicomputers," in Postscript Marc Olano, "Programmability in an Interactive Graphics Pipeline," in Postscript Krish Ponamgi, "Collision Detection for Interactive Environments and Simulations," in Postscript Russell Taylor, "Nanomanipulator Proposal," in Postscript Greg Turk, " Generating Textures on Arbitrary Surfaces ," in HTML and Postscript Terry Yoo, " Statistical Control of Nonlinear Diffusion ," in Postscript

Research Proposal Example/Sample

Detailed Walkthrough + Free Proposal Template

If you’re getting started crafting your research proposal and are looking for a few examples of research proposals , you’ve come to the right place.

In this video, we walk you through two successful (approved) research proposals , one for a Master’s-level project, and one for a PhD-level dissertation. We also start off by unpacking our free research proposal template and discussing the four core sections of a research proposal, so that you have a clear understanding of the basics before diving into the actual proposals.

• Research proposal example/sample – Master’s-level (PDF/Word)
• Research proposal example/sample – PhD-level (PDF/Word)
• Proposal template (Fully editable) 

If you’re working on a research proposal for a dissertation or thesis, you may also find the following useful:

• Research Proposal Bootcamp : Learn how to write a research proposal as efficiently and effectively as possible
• 1:1 Proposal Coaching : Get hands-on help with your research proposal

PS – If you’re working on a dissertation, be sure to also check out our collection of dissertation and thesis examples here .

FAQ: Research Proposal Example

Research proposal example: frequently asked questions, are the sample proposals real.

Yes. The proposals are real and were approved by the respective universities.

Can I copy one of these proposals for my own research?

As we discuss in the video, every research proposal will be slightly different, depending on the university’s unique requirements, as well as the nature of the research itself. Therefore, you’ll need to tailor your research proposal to suit your specific context.

You can learn more about the basics of writing a research proposal here .

How do I get the research proposal template?

You can access our free proposal template here .

Is the proposal template really free?

Yes. There is no cost for the proposal template and you are free to use it as a foundation for your research proposal.

Where can I learn more about proposal writing?

For self-directed learners, our Research Proposal Bootcamp is a great starting point.

For students that want hands-on guidance, our private coaching service is recommended.

Psst… there’s more!

This post is an extract from our bestselling short course, Research Proposal Bootcamp . If you want to work smart, you don't want to miss this .

You Might Also Like:

10 Comments

I am at the stage of writing my thesis proposal for a PhD in Management at Altantic International University. I checked on the coaching services, but it indicates that it’s not available in my area. I am in South Sudan. My proposed topic is: “Leadership Behavior in Local Government Governance Ecosystem and Service Delivery Effectiveness in Post Conflict Districts of Northern Uganda”. I will appreciate your guidance and support

GRADCOCH is very grateful motivated and helpful for all students etc. it is very accorporated and provide easy access way strongly agree from GRADCOCH.

Proposal research departemet management

I am at the stage of writing my thesis proposal for a masters in Analysis of w heat commercialisation by small holders householdrs at Hawassa International University. I will appreciate your guidance and support

please provide a attractive proposal about foreign universities .It would be your highness.

comparative constitutional law

Kindly guide me through writing a good proposal on the thesis topic; Impact of Artificial Intelligence on Financial Inclusion in Nigeria. Thank you

Kindly help me write a research proposal on the topic of impacts of artisanal gold panning on the environment

I am in the process of research proposal for my Master of Art with a topic : “factors influence on first-year students’s academic adjustment”. I am absorbing in GRADCOACH and interested in such proposal sample. However, it is great for me to learn and seeking for more new updated proposal framework from GRADCAOCH.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

How to write a research proposal

What is a research proposal.

A research proposal should present your idea or question and expected outcomes with clarity and definition – the what.

It should also make a case for why your question is significant and what value it will bring to your discipline – the why. 

What it shouldn't do is answer the question – that's what your research will do.

Why is it important?

Research proposals are significant because Another reason why it formally outlines your intended research. Which means you need to provide details on how you will go about your research, including:

• your approach and methodology
• timeline and feasibility
• all other considerations needed to progress your research, such as resources.

Think of it as a tool that will help you clarify your idea and make conducting your research easier.

How long should it be?

Usually no more than 2000 words, but check the requirements of your degree, and your supervisor or research coordinator.

Presenting your idea clearly and concisely demonstrates that you can write this way – an attribute of a potential research candidate that is valued by assessors.

What should it include?

Project title.

Your title should clearly indicate what your proposed research is about.

Research supervisor

State the name, department and faculty or school of the academic who has agreed to supervise you. Rest assured, your research supervisor will work with you to refine your research proposal ahead of submission to ensure it meets the needs of your discipline.

Proposed mode of research

Describe your proposed mode of research. Which may be closely linked to your discipline, and is where you will describe the style or format of your research, e.g. data, field research, composition, written work, social performance and mixed media etc. 

This is not required for research in the sciences, but your research supervisor will be able to guide you on discipline-specific requirements.

Aims and objectives

What are you trying to achieve with your research? What is the purpose? This section should reference why you're applying for a research degree. Are you addressing a gap in the current research? Do you want to look at a theory more closely and test it out? Is there something you're trying to prove or disprove? To help you clarify this, think about the potential outcome of your research if you were successful – that is your aim. Make sure that this is a focused statement.

Your objectives will be your aim broken down – the steps to achieving the intended outcome. They are the smaller proof points that will underpin your research's purpose. Be logical in the order of how you present these so that each succeeds the previous, i.e. if you need to achieve 'a' before 'b' before 'c', then make sure you order your objectives a, b, c.

A concise summary of what your research is about. It outlines the key aspects of what you will investigate as well as the expected outcomes. It briefly covers the what, why and how of your research. 

A good way to evaluate if you have written a strong synopsis, is to get somebody to read it without reading the rest of your research proposal. Would they know what your research is about?

Now that you have your question clarified, it is time to explain the why. Here, you need to demonstrate an understanding of the current research climate in your area of interest.

Providing context around your research topic through a literature review will show the assessor that you understand current dialogue around your research, and what is published.

Demonstrate you have a strong understanding of the key topics, significant studies and notable researchers in your area of research and how these have contributed to the current landscape.

Expected research contribution

In this section, you should consider the following:

• Why is your research question or hypothesis worth asking?
• How is the current research lacking or falling short?
• What impact will your research have on the discipline?
• Will you be extending an area of knowledge, applying it to new contexts, solving a problem, testing a theory, or challenging an existing one?
• Establish why your research is important by convincing your audience there is a gap.
• What will be the outcome of your research contribution?
• Demonstrate both your current level of knowledge and how the pursuit of your question or hypothesis will create a new understanding and generate new information.
• Show how your research is innovative and original.

Draw links between your research and the faculty or school you are applying at, and explain why you have chosen your supervisor, and what research have they or their school done to reinforce and support your own work. Cite these reasons to demonstrate how your research will benefit and contribute to the current body of knowledge.

Proposed methodology

Provide an overview of the methodology and techniques you will use to conduct your research. Cover what materials and equipment you will use, what theoretical frameworks will you draw on, and how will you collect data.

Highlight why you have chosen this particular methodology, but also why others may not have been as suitable. You need to demonstrate that you have put thought into your approach and why it's the most appropriate way to carry out your research. 

It should also highlight potential limitations you anticipate, feasibility within time and other constraints, ethical considerations and how you will address these, as well as general resources.

A work plan is a critical component of your research proposal because it indicates the feasibility of completion within the timeframe and supports you in achieving your objectives throughout your degree.

Consider the milestones you aim to achieve at each stage of your research. A PhD or master's degree by research can take two to four years of full-time study to complete. It might be helpful to offer year one in detail and the following years in broader terms. Ultimately you have to show that your research is likely to be both original and finished – and that you understand the time involved.

Provide details of the resources you will need to carry out your research project. Consider equipment, fieldwork expenses, travel and a proposed budget, to indicate how realistic your research proposal is in terms of financial requirements and whether any adjustments are needed.

Bibliography

Provide a list of references that you've made throughout your research proposal. 

Apply for postgraduate study

New hdr curriculum, find a supervisor.

Search by keyword, topic, location, or supervisor name

• 1800 SYD UNI ( 1800 793 864 )
• or +61 2 8627 1444
• Open 9am to 5pm, Monday to Friday
• Student Centre Level 3 Jane Foss Russell Building Darlington Campus

Scholarships

Find the right scholarship for you

Research areas

Our research covers the spectrum – from linguistics to nanoscience

Our breadth of expertise across our faculties and schools is supported by deep disciplinary knowledge. We have significant capability in more than 20 major areas of research.

Research facilities

High-impact research through state-of-the-art infrastructure

• Postgraduate

Research degrees

• Examples of Research proposals
• Apply for 2024
• Find a course
• Accessibility

Examples of research proposals

How to write your research proposal, with examples of good proposals.

Research proposals

Your research proposal is a key part of your application. It tells us about the question you want to answer through your research. It is a chance for you to show your knowledge of the subject area and tell us about the methods you want to use.

We use your research proposal to match you with a supervisor or team of supervisors.

In your proposal, please tell us if you have an interest in the work of a specific academic at York St John. You can get in touch with this academic to discuss your proposal. You can also speak to one of our Research Leads. There is a list of our Research Leads on the Apply page.

When you write your proposal you need to:

• Highlight how it is original or significant
• Explain how it will develop or challenge current knowledge of your subject
• Identify the importance of your research
• Show why you are the right person to do this research
• Research Proposal Example 1 (DOC, 49kB)
• Research Proposal Example 2 (DOC, 0.9MB)
• Research Proposal Example 3 (DOC, 55.5kB)
• Research Proposal Example 4 (DOC, 49.5kB)

Subject specific guidance

• Writing a Humanities PhD Proposal (PDF, 0.1MB)
• Writing a Creative Writing PhD Proposal (PDF, 0.1MB)
• About the University
• Our culture and values
• Academic schools
• Academic dates
• Press office

Our wider work

• Business support
• Work in the community
• Donate or support

Connect with us

York St John University

Lord Mayor’s Walk

[email protected]

01904 624 624

York St John London Campus

6th Floor Export Building

1 Clove Crescent

[email protected]

01904 876 944

• Policies and documents
• Module documents
• Programme specifications
• Quality gateway
• Admissions documents
• Access and Participation Plan
• Freedom of information
• Accessibility statement
• Modern slavery and human trafficking statement

© York St John University 2024

Colour Picker

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Dui id ornare arcu odio.

Felis bibendum ut tristique et egestas quis ipsum. Et netus et malesuada fames ac turpis egestas. Faucibus pulvinar elementum integer enim neque volutpat ac. Hac habitasse platea dictumst vestibulum rhoncus.

Nec ullamcorper sit amet risus nullam eget felis eget. Eget felis eget nunc lobortis mattis aliquam faucibus purus.

Research Plan / Thesis Proposal

According to Academic Regulations , all doctorands must elaborate and defend a report containing the research plan to be developed during the thesis. The research plan must be delivered up to one year since the date of first registration. The research plan shall be defended before a committee in the spring following the plan delivery.

Report structure

The report shall contain the necessary information to evaluate the originality, coherence and viability of the proposed thesis. It is suggested that the document is structured in the following sections:

• Personal details of the doctoral student and the thesis supervisor(s).
• Title of the thesis proposal.
• Summary of the proposal.
• Critical state of the art on the subject.
• Thesis goals.
• Methodology and resources needed.
• Description of tasks to achieve the thesis objectives.
• Workplan schedule with estimated deadlines.
• Bibliography.
• Material published in the field, if applicable.

Delivery procedure

The delivery and assessment is done through Atenea PhD   The Research Plan document needs to be uploaded  by the Doctorand, and validated by the Supervisor, before 1 year has passed after the date of first registration. Next is a description of the different steps involved;

• The Program administration enables the dates for upload of the research plan in Atenea PhD.
• The supervisor authorizes the upload of the document by the doctorand in Atenea PhD, Research Plan section.
• Doctorand uploads the updated version of the Research Plan in Atenea PhD, Research Plan section.
• Supervisor validates the submission, adding a comment in the Observations section.

When to defend the Research Plan

The Doctoral Program organizes the presentations of the research plans in early summer; typically, late June. The Program will appoint evaluation committees according to research areas, and all delivered research plans will be evaluated. The exact dates for Research Plan defenses will be announced by the Program.

It is the responsibility of the doctorand to have delivered the Research Plan via Atenea in due time. Failure to deliver the Research Plan at the time of presentation implies the dismissal of the program.

Research Plan Evaluation

The research plan shall be examined by a committee composed of three doctor members, one of them a professor of the program representing the CAPD, another member a professor of the program expert in the subject of the proposal, and a third member an expert external to the Program. The evaluation criteria used by the jury can be found in the Guidelines for the evaluation of the thesis proposal / research plan .

The evaluation committee will address the candidate comments and recommendations about his/her thesis proposal. These comments and recommendations must be considered by the doctorand, together with the thesis advisor . In case the evaluation committee writes them in the assessment report, the Academic Committee is in charge to check how they have been attended. Throughout the following years, the doctorand will have to justify the thesis progress compared to the proposed research plan, as a part of the yearly tutorship evaluation . This justification may also include an update, revision or improvement of the research plan, with the validation of the thesis advisor.

Documents and forms:

• Guidelines for the evaluation of the Thesis Proposal / Research Plan
• FAQs for Atenea PhD

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

Research Proposal For 2017 PhD Civil 01 Shakeel

Related Papers

Bharathi Murugan

Recycling granulated waste tires (crumb rubber) has been widely studied for the last twenty years mostly relating to applications such as asphalt pavement, waterproofing system, membrane liners, etc., Use of alternative material in concrete opens a whole new range of possibilities in the construction industry. Sustainable technologies for concrete construction are not only essential for the development of eco friendly construction but also to manage huge quantity of solid waste disposal without compromising durability. In this study, the use of crumb rubber to replace fine aggregates in concrete was studied. It is believed that concrete acting as a binder mixed with crumb rubber can make concrete more flexible and thus, provide softness to the surface. The objective of this paper is to investigate the mechanical properties of concrete when crumb rubber is used as partial replacement of fine aggregate in different percentage (5%, 10%, 15%, 20% and 25%) by volume. Laboratory trials we...

International Journal of Engineering Research and Technology (IJERT)

IJERT Journal

https://www.ijert.org/a-study-on-rubberized-concrete https://www.ijert.org/research/a-study-on-rubberized-concrete-IJERTV9IS090502.pdf The use of scrap tyre rubber in the preparation of concrete has been thought as an alternative disposal of such waste to protect the environment. In this study an attempt has been made to identify the various properties necessary for the design of concrete mix with the coarse tyre rubber chips as aggregate in a systematic manner. In the present experimental investigation, the M25 grade concrete has been chosen as the reference concrete specimen. Scrap tyre rubber chips, has been used as coarse aggregate with the replacement of conventional coarse aggregate Concrete is one of the most popular building materials. The construction industry is always increases its uses and applications. Therefore, it is required to find alternative materials to reduce the cost of concrete. On the other hand, Non-biodegradable waste i.e. water bottles, cool drink bottles and disposable glasses, shredded or crumbed rubber etc., is creating a lot of problems in the environment and its disposal becoming a great difficulty. The objective of this paper is to investigate the use of rubber pieces as coarse aggregate in the concrete. Concrete tested with varying percentages of rubber from 0 to 15% of normal aggregates. Compressive strength, of concrete is measured and comparative analysis is made.

International Journal of Innovations in Engineering and Science

Swapnil Malipatil

Nepal, along with the whole world facing a big environmental issue of non-degradable rubber Tyre (crumb rubber). Department of Transport Management (DoTM) Nepal, (2014) has said that number of vehicles registered in the country has reached 2,551,138 units and rubber Tyre which cannot be discharged off-easily in the environment as its decomposition takes much time and burning produces air pollution with emission of carbon monoxide and the ash produced from burning material that contains plastic and rubber could be hazardous. In such a case, reuse of rubber wastes would be better choice. Paper works on the reuse of rubber in concrete as a fine and coarse aggregate in proportion in the concrete. Different index properties like dry weight , thermal conductivity , Compressive strength, tensile strength are investigated and compared with ordinary concrete’s above mentioned properties.Better bonding between the molecules of rubber and cement in the mix is established with the use of NaOH s...

International Research Group - IJET JOURNAL

Matteo Sarasso

Since waste tires constitute a serious environmental concern, several studies are devoted to the use of finely divided recycled rubber for the production of rubberized concrete by partial substitution of the mineral aggregate fraction. The introduction of rubber into concrete presents several advantages (e.g., improvement of toughness and thermal/electrical/acoustic insulation capacities). Unfortunately, the addition of a high content of rubber into concrete causes an important loss of mechanical resistance of the final composite. In this context, several scientific studies are devoted to investigate the best technical solutions for favoring the interfacial adhesion between rubber and cement paste, but the interpretation of the literature is often misleading. To overcome this issue, the metadata extrapolated from the single scientific works were critically re-analyzed, forming reference diagrams where the variability fields of the different rubber concrete formulations (in terms of ...

Case Studies in Construction Materials

najib gerges

Sachin Dass

The disposal of used tires is a major environmental problem throughout the world which causes environmental hazards. Crumb rubber is a waste material that is ideal for use in concrete applications. The aim of this study is achieved to use of rubber waste as partial replacement of fine aggregate to produce rubberize concrete in M30 mix. Different partial replacements of crumb rubber (0, 5, 10, 15 and 20%) by volume of fine aggregate are cast and test for compressive strength, flexural strength, split tensile strength and stress-strain behavior. The results showed that there is a reduction in all type of strength for crumb rubber mixture, but slump values increase as the crumb rubber content increase from 0% to 20%. Meaning that crumb rubber mixture is more workable compare to normal concrete and also it is useful in making light weight concrete. It is recommended to use the rubberized concrete for non structural applications.

Civil Engineering Journal

Hayder M.K. Al-Mutairee

In terms of recycling and reuse, today&#39;s global generation of waste tire well exceeds its consumption. This has resulted in the accumulation of large stocks of toxic rubber waste that raise health and safety risks. The use of waste tire rubber for the construction of the concrete structure was suggested to combat this challenge. This paper explores tests that were performed with samples of waste tire rubber concrete to evaluate compressive strength, flexural tensile strength, modulus of rupture, and impacts resistance. The main parameters investigated were the rubber ratio as a partial volumetric replacement with fine and coarse aggregate. Chip and crumb rubbers were used to replace coarse and fine aggregate respectively in four different amounts by volume (5%, 10%, 15%, and 20%). Even if the inclusion of waste tire rubber in concrete has specific apparent degradations, the potential benefit seems to overlook the adverse effects and also meet the primary significant value of res...

isara solutions

Interal Res journa Managt Sci Tech

In Construction industry, concrete is mostly used in world-wise as construction materials and about 12.5 billion tons of natural resources are used to make the concrete. Many scientists and researchers are trying to find alternate construction materials, which are environmentally friendly and contribute towards sustainable development or green construction. Use of rubber as an alternate additive to the conventional concrete mix could be the huge step ahead. The quantity of rubber wastes is being generated rapidly day by day, so dramatically that it has ringed an alarm to the disposal problems as well as the harm environment could go through such huge non-biodegradable product. Hence, using scrap tyres crumb in concrete is a technical need and needed for mother nature; the modified crumb rubber concrete is considered a light- weight alternate to conventional concrete. The objective of this study is to determine the strength behavior of crumb rubber concrete which is in powder form.

RELATED PAPERS

Gershom Scholem ז״ל

Antike Fachtexte / Ancient Technical Texts

Markus Asper

Revista Hospital Universitário Pedro Ernesto

Walace Monteiro

Israel Journal of Mathematics

John Kieffer

imane benelbarhdadi

Blouse Motif by Rumah Jahit Azka

Al-Ta lim Journal

Alfurqan UNP

Saudi Journal of Biological Sciences

laurie perrot

Proceedings of the 3rd symposium on Applied perception in graphics and visualization - APGV '06

Sevil Sariyildiz

The International Journal of Tuberculosis and Lung Disease

FANUEL MECKSON BICKTON

American Journal of Roentgenology

Gustavo Stork

EPISTEMOLOGIAS DO SUL

Elzahrã Osman

International Journal of Clinical Dental Science

Supriya Patil

Frontiers in Neurology

The International Journal of Oral &amp; Maxillofacial Implants

roberto crespi

Industrial Crops and Products

Majid Mohammadhosseini

Acta Myologica

Luisa Politano

IEEE Transactions on Semiconductor Manufacturing

Charles Weber

jkjhygffg bhhnhfgf

Dyna-colombia

Denise Gentili Nunes

Value in Health

Ralph Swindle

Ciencia latina

Isabel Cristina Flores Rueda

Abdelrahman Osama Alkady

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

Suggestions or feedback?

MIT News | Massachusetts Institute of Technology

• Machine learning
• Social justice
• Black holes
• Classes and programs

Departments

• Aeronautics and Astronautics
• Brain and Cognitive Sciences
• Architecture
• Political Science
• Mechanical Engineering

Centers, Labs, & Programs

• Abdul Latif Jameel Poverty Action Lab (J-PAL)
• Picower Institute for Learning and Memory
• Lincoln Laboratory
• School of Architecture + Planning
• School of Engineering
• School of Humanities, Arts, and Social Sciences
• Sloan School of Management
• School of Science
• MIT Schwarzman College of Computing

HPI-MIT design research collaboration creates powerful teams

Press contact :.

Previous image Next image

The recent ransomware attack on Change Healthcare, which severed the network connecting health care providers, pharmacies, and hospitals with health insurance companies, demonstrates just how disruptive supply chain attacks can be. In this case, it hindered the ability of those providing medical services to submit insurance claims and receive payments. This sort of attack and other forms of data theft are becoming increasingly common and often target large, multinational corporations through the small and mid-sized vendors in their corporate supply chains, enabling breaks in these enormous systems of interwoven companies. Cybersecurity researchers at MIT and the Hasso Plattner Institute (HPI) in Potsdam, Germany, are focused on the different organizational security cultures that exist within large corporations and their vendors because it’s that difference that creates vulnerabilities, often due to the lack of emphasis on cybersecurity by the senior leadership in these small to medium-sized enterprises (SMEs). Keri Pearlson, executive director of Cybersecurity at MIT Sloan (CAMS); Jillian Kwong, a research scientist at CAMS; and Christian Doerr, a professor of cybersecurity and enterprise security at HPI, are co-principal investigators (PIs) on the research project, “Culture and the Supply Chain: Transmitting Shared Values, Attitudes and Beliefs across Cybersecurity Supply Chains.”

Their project was selected in the 2023 inaugural round of grants from the HPI-MIT Designing for Sustainability program , a multiyear partnership funded by HPI and administered by the MIT Morningside Academy for Design (MAD). The program awards about 10 grants annually of up to $200,000 each to multidisciplinary teams with divergent backgrounds in computer science, artificial intelligence, machine learning, engineering, design, architecture, the natural sciences, humanities, and business and management. The 2024 Call for Applications is open through June 3. Designing for Sustainability grants support scientific research that promotes the United Nations’ Sustainable Development Goals (SDGs) on topics involving sustainable design, innovation, and digital technologies, with teams made up of PIs from both institutions. The PIs on these projects, who have common interests but different strengths, create more powerful teams by working together.

Transmitting shared values, attitudes, and beliefs to improve cybersecurity across supply chains

The MIT and HPI cybersecurity researchers say that most ransomware attacks aren’t reported. Smaller companies hit with ransomware attacks just shut down, because they can’t afford the payment to retrieve their data. This makes it difficult to know just how many attacks and data breaches occur. “As more data and processes move online and into the cloud, it becomes even more important to focus on securing supply chains,” Kwong says. “Investing in cybersecurity allows information to be exchanged freely while keeping data safe. Without it, any progress towards sustainability is stalled.”

One of the first large data breaches in the United States to be widely publicized provides a clear example of how an SME cybersecurity can leave a multinational corporation vulnerable to attack. In 2013, hackers entered the Target Corporation’s own network by obtaining the credentials of a small vendor in its supply chain: a Pennsylvania HVAC company. Through that breach, thieves were able to install malware that stole the financial and personal information of 110 million Target customers, which they sold to card shops on the black market.

To prevent such attacks, SME vendors in a large corporation’s supply chain are required to agree to follow certain security measures, but the SMEs usually don’t have the expertise or training to make good on these cybersecurity promises, leaving their own systems, and therefore any connected to them, vulnerable to attack.

“Right now, organizations are connected economically, but not aligned in terms of organizational culture, values, beliefs, and practices around cybersecurity,” explains Kwong. “Basically, the big companies are realizing the smaller ones are not able to implement all the cybersecurity requirements. We have seen some larger companies address this by reducing requirements or making the process shorter. However, this doesn’t mean companies are more secure; it just lowers the bar for the smaller suppliers to clear it.”

Pearlson emphasizes the importance of board members and senior management taking responsibility for cybersecurity in order to change the culture at SMEs, rather than pushing that down to a single department, IT office, or in some cases, one IT employee.

The research team is using case studies based on interviews, field studies, focus groups, and direct observation of people in their natural work environments to learn how companies engage with vendors, and the specific ways cybersecurity is implemented, or not, in everyday operations. The goal is to create a shared culture around cybersecurity that can be adopted correctly by all vendors in a supply chain.

This approach is in line with the goals of the Charter of Trust Initiative, a partnership of large, multinational corporations formed to establish a better means of implementing cybersecurity in the supply chain network. The HPI-MIT team worked with companies from the Charter of Trust and others last year to understand the impacts of cybersecurity regulation on SME participation in supply chains and develop a conceptual framework to implement changes for stabilizing supply chains.

Cybersecurity is a prerequisite needed to achieve any of the United Nations’ SDGs, explains Kwong. Without secure supply chains, access to key resources and institutions can be abruptly cut off. This could include food, clean water and sanitation, renewable energy, financial systems, health care, education, and resilient infrastructure. Securing supply chains helps enable progress on all SDGs, and the HPI-MIT project specifically supports SMEs, which are a pillar of the U.S. and European economies.

Personalizing product designs while minimizing material waste

In a vastly different Designing for Sustainability joint research project that employs AI with engineering, “Personalizing Product Designs While Minimizing Material Waste” will use AI design software to lay out multiple parts of a pattern on a sheet of plywood, acrylic, or other material, so that they can be laser cut to create new products in real time without wasting material.

Stefanie Mueller, the TIBCO Career Development Associate Professor in the MIT Department of Electrical Engineering and Computer Science and a member of the Computer Science and Artificial Intelligence Laboratory, and Patrick Baudisch, a professor of computer science and chair of the Human Computer Interaction Lab at HPI, are co-PIs on the project. The two have worked together for years; Baudisch was Mueller’s PhD research advisor at HPI.

Baudisch’s lab developed an online design teaching system called Kyub that lets students design 3D objects in pieces that are laser cut from sheets of wood and assembled to become chairs, speaker boxes, radio-controlled aircraft, or even functional musical instruments. For instance, each leg of a chair would consist of four identical vertical pieces attached at the edges to create a hollow-centered column, four of which will provide stability to the chair, even though the material is very lightweight.

“By designing and constructing such furniture, students learn not only design, but also structural engineering,” Baudisch says. “Similarly, by designing and constructing musical instruments, they learn about structural engineering, as well as resonance, types of musical tuning, etc.”

Mueller was at HPI when Baudisch developed the Kyub software, allowing her to observe “how they were developing and making all the design decisions,” she says. “They built a really neat piece for people to quickly design these types of 3D objects.” However, using Kyub for material-efficient design is not fast; in order to fabricate a model, the software has to break the 3D models down into 2D parts and lay these out on sheets of material. This takes time, and makes it difficult to see the impact of design decisions on material use in real-time.

Mueller’s lab at MIT developed software based on a layout algorithm that uses AI to lay out pieces on sheets of material in real time. This allows AI to explore multiple potential layouts while the user is still editing, and thus provide ongoing feedback. “As the user develops their design, Fabricaide  decides good placements of parts onto the user's available materials, provides warnings if the user does not have enough material for a design, and makes suggestions for how the user can resolve insufficient material cases,” according to the project website.

The joint MIT-HPI project integrates Mueller’s AI software with Baudisch’s Kyub software and adds machine learning to train the AI to offer better design suggestions that save material while adhering to the user’s design intent.

“The project is all about minimizing the waste on these materials sheets,” Mueller says. She already envisions the next step in this AI design process: determining how to integrate the laws of physics into the AI’s knowledge base to ensure the structural integrity and stability of objects it designs.

AI-powered startup design for the Anthropocene: Providing guidance for novel enterprises

Through her work with the teams of MITdesignX and its international programs, Svafa Grönfeldt, faculty director of MITdesignX and professor of the practice in MIT MAD, has helped scores of people in startup companies use the tools and methods of design to ensure that the solution a startup proposes actually fits the problem it seeks to solve. This is often called the problem-solution fit.

Grönfeldt and MIT postdoc Norhan Bayomi are now extending this work to incorporate AI into the process, in collaboration with MIT Professor John Fernández and graduate student Tyler Kim. The HPI team includes Professor Gerard de Melo; HPI School of Entrepreneurship Director Frank Pawlitschek; and doctoral student Michael Mansfeld.

“The startup ecosystem is characterized by uncertainty and volatility compounded by growing uncertainties in climate and planetary systems,” Grönfeldt says. “Therefore, there is an urgent need for a robust model that can objectively predict startup success and guide design for the Anthropocene.”

While startup-success forecasting is gaining popularity, it currently focuses on aiding venture capitalists in selecting companies to fund, rather than guiding the startups in the design of their products, services and business plans.

“The coupling of climate and environmental priorities with startup agendas requires deeper analytics for effective enterprise design,” Grönfeldt says. The project aims to explore whether AI-augmented decision-support systems can enhance startup-success forecasting.

“We're trying to develop a machine learning approach that will give a forecasting of probability of success based on a number of parameters, including the type of business model proposed, how the team came together, the team members’ backgrounds and skill sets, the market and industry sector they're working in and the problem-solution fit,” says Bayomi, who works with Fernández in the MIT Environmental Solutions Initiative. The two are co-founders of the startup Lamarr.AI, which employs robotics and AI to help reduce the carbon dioxide impact of the built environment.

The team is studying “how company founders make decisions across four key areas, starting from the opportunity recognition, how they are selecting the team members, how they are selecting the business model, identifying the most automatic strategy, all the way through the product market fit to gain an understanding of the key governing parameters in each of these areas,” explains Bayomi.

The team is “also developing a large language model that will guide the selection of the business model by using large datasets from different companies in Germany and the U.S. We train the model based on the specific industry sector, such as a technology solution or a data solution, to find what would be the most suitable business model that would increase the success probability of a company,” she says.

The project falls under several of the United Nations’ Sustainable Development Goals, including economic growth, innovation and infrastructure, sustainable cities and communities, and climate action.

Furthering the goals of the HPI-MIT Joint Research Program

These three diverse projects all advance the mission of the HPI-MIT collaboration. MIT MAD aims to use design to transform learning, catalyze innovation, and empower society by inspiring people from all disciplines to interweave design into problem-solving. HPI uses digital engineering concentrated on the development and research of user-oriented innovations for all areas of life.

Interdisciplinary teams with members from both institutions are encouraged to develop and submit proposals for ambitious, sustainable projects that use design strategically to generate measurable, impactful solutions to the world’s problems.

Share this news article on:

Related links.

• Cybersecurity at MIT Sloan
• MIT Morningside Academy for Design
• Hasso Plattner Institute

Related Topics

• Manufacturing
• Collaboration
• Supply chains
• Cybersecurity
• Business and management
• Artificial intelligence
• Climate change
• Cleaner industry
• Renewable energy
• Electrical Engineering & Computer Science (eecs)
• Innovation and Entrepreneurship (I&E)
• Computer Science and Artificial Intelligence Laboratory (CSAIL)
• Environmental Solutions Initiative
• MIT Sloan School of Management
• School of Architecture and Planning

Related Articles

A new way to integrate data with physical objects

New research collaboration aims to tackle global societal challenges through design

MIT Morningside Academy for Design created as a new hub for cross-disciplinary education, research, and innovation

Previous item Next item

More MIT News

The power of App Inventor: Democratizing possibilities for mobile applications

Read full story →

Using MRI, engineers have found a way to detect light deep in the brain

From steel engineering to ovarian tumor research

A better way to control shape-shifting soft robots

Professor Emeritus David Lanning, nuclear engineer and key contributor to the MIT Reactor, dies at 96

Discovering community and cultural connections

• More news on MIT News homepage →

Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge, MA, USA

• Map (opens in new window)
• Events (opens in new window)
• People (opens in new window)
• Careers (opens in new window)
• Accessibility
• Social Media Hub
• MIT on Facebook
• MIT on YouTube
• MIT on Instagram

The Best PhD Research Proposal Writing Service in 2024

W riting a research proposal is a crucial part of education worldwide. It involves PhD students summarizing their proposed research in a concise yet organized manner. This process not only demonstrates the student's understanding of the subject matter but also serves as a roadmap for the research journey ahead. 

In a well-crafted research proposal, students outline where their research fits into the bigger picture and what's already been debated or discovered on the topic. Despite the varying rules worldwide, a PhD proposal needs to convey a clear rationale for the chosen research area and establish the relevance of the proposed study. It's not just about sharing your idea; it's about showing you're ready for serious investigation. Can you tackle complex ideas and express yourself clearly? That's the question this type of work aims to answer through a systematic examination of the research questions, objectives, and methodologies.

Typically, a research proposal for PhD is around 2,500 to 3,000 words. However, word counts vary across universities, so always remember to check your guidelines. Moreover, make sure your work contains the following components:

• A working title that can be refined later.
• An abstract summarizing the problem you're addressing and your main question.
• Background information to contextualize your investigation.
• Your research questions.
• The methods you'll employ in your study.
• The significance of your research.
• A bibliography.

In case you get stuck and need a helping hand with your PhD research proposal, the two services below are your best bet, and now we'll explain why. 

Phdresearchproposal.org —Best Research Proposal Writing Service

Phdresearchproposal.org stands out as a trusted and established platform, offering confidential assistance to PhD students seeking expert support with their complex research projects. Operating as a registered business since 2012, the platform accumulated over a decade of expertise in delivering professional research proposal writing services. Unlike "all-in-one" services, this platform focuses exclusively on crafting tailored proposals for PhD students, catering specifically to the unique demands of doctoral-level research. 

Key Benefits:

• Wide Range of Specialized Services

The platform's experts offer assistance with various aspects, including choosing a topic, creating any chapter of your PhD project (e.g., methodology, results), crafting the entire paper based on your material or their findings, and editing or formatting your final draft. PhD-level samples on their website provide insights into the expected quality.

• Experienced Research Proposal Writers

The platform employs solely writers with PhD credentials specializing in popular subjects like Health Sciences, Nursing, Business and Management, Law, and various other disciplines. Proficient in qualitative, quantitative, and mixed methods analysis, their expertise ensures the delivery of high-quality PhD-level work with quick approval.

• Access to All Scholarly Databases 

From Scopus to ProQuest, the service has extensive access to a variety of databases. This ensures writers incorporate only relevant sources related to your research area into the completed work.

• Original, Human-Written Content

According to CTN News The platform's experts craft all content from scratch, adhering to the specific requirements of your PhD program. Their dedicated Quality Assurance Department meticulously checks final drafts for plagiarism, source credibility, and generated content. Furthermore, they provide originality reports upon request.

The only drawback we've noticed with this research proposal writing service so far is the necessity to pay extra when selecting top and premium PhD experts.

This is what recent clients are saying about them on platforms like Sitejabber and Reviews.io:

“I'm glad that I ordered a PhD proposal on this site. The writer explained in depth what methods I have to use in my research and what steps I need to take. I'm sure that the committee will agree with that." – Sutton T.

"I was stuck on my PhD paper before I decided to use the platform. Their writers really came through in a clutch with quality work that met my instructions." – Cree K. 

In light of the above, Phdresearchproposal.org stands out as a legitimate and reliable service for PhD proposals. However, what truly sets them apart as the best research proposal writing service is their commitment to customer satisfaction. They provide a 14-day window for unlimited free revisions to guarantee the approval of your PhD project. Moreover, if any issues arise, they promptly refund your money.

Phdresearch.net —#1 Research Proposal Writing Service for Rare Subjects

The next best option to obtain quality help with writing a PhD research proposal is Phdresearch.net. The platform has been ranked #1 for student satisfaction for three consecutive years. It also focuses on assistance with complex academic projects and offers comprehensive help with PhD proposals at any project stage. The consistently positive feedback attests to the excellence of their services.

• Skilled, qualified PhD specialists across 80 fields.
• 100% report-validated uniqueness and absence of AI-generated content.
• Complete confidentiality of all interactions.
• Free adjustments until you're satisfied, plus a follow-up quality check.
• Access to the major online databases.
• Adherence to instructions.
• Strong refund policy.
• You need to pay extra for additional services like an added plagiarism report, initial draft, etc.
• Response time via email can take time, so it's better to contact them through chat.

Here's what the company's customers are sharing on popular review platforms:

"After placing an order, I realized that I messed up instructions a little and ordered a slightly different work. But even though the writer started working on the order, we managed to settle down the updated requirements easily, and he was still able to deliver the work on time. The writer was responsive, and we had productive communication throughout the process" – Brendan H.

"I feel confident with this company; the help I got is tremendous. I had a writing block and was running out of time, but thanks to their support, I managed to get the job done on time. They're real professionals, and it was pure luck I found them" – Jacob F.

While offering a broader range of services and being less specialized in PhD proposal writing, Phdresearch.net is another decent option for students seeking a trustworthy writing service that delivers on its promises and offers strong satisfaction guarantees.

What Is the Structure of a Research Proposal PhD? 

The structure of a PhD proposal typically includes the following sections:

• Abstract (usually around 200-300 words)
• Introduction
• Literature Review
• Methodology
• Significance and Contribution of the Study
• Ethical Considerations
• Budget (if applicable)

Note that the specific requirements for a research proposal PhD may vary depending on the field of study and program. Always check with your advisor or the guidelines provided by your institution.

How Important Is It to Write a PhD Proposal for Research?

Research proposal writing is crucial for several reasons:

• It helps you articulate and clarify the focus of your study and ensures a clear understanding of your research objectives.
• It aids in identifying the necessary time and materials required for your PhD project.
• It helps demonstrate the significance of your study and how it fills a gap in current knowledge.
• It enables a thorough evaluation of the feasibility of your PhD project.
• It increases the likelihood of successfully obtaining grants or financial support.
• It showcases your interests in the field, background, and ability to formulate a coherent and impactful work plan.

Follow also this useful link to learn more about the evolution of writing a research proposal.

Can I Pay Someone for Writing a Research Proposal?

Yes, you can, especially if you find yourself stuck, have limited access to credible sources on the topic, or lack the time for in-depth study and producing a well-organized PhD-level copy. However, make sure that the service you choose is reliable and employs qualified writers capable of delivering quality work. Click for more information about reputable services you can trust.

Who Writes Proposals in a PhD Research Proposal Writing Service?

If speaking about top services like the ones described above, the individuals writing PhD proposals are typically qualified, hand-selected experts with 5-8 years of hands-on expertise in the field and hundreds of positive reviews from satisfied clients. 

Is Every PhD Research Proposal Writing Service Listed Legit?

Yes, the above PhD research proposal writing services are all legit and have over a decade of experience crafting proposals for domestic and international students from different PhD programs.

In Conclusion

Considering the challenges most students encounter in determining suitable methodologies, it becomes quite demanding to allocate sufficient time and energy to craft an impeccable PhD proposal. This is where the support of a specialized PhD research proposal writing service, such as Phdresearchproposal.org, becomes invaluable.

The service's focused approach ensures that its writers comprehend the nuances of the process and the challenges you face, enabling them to efficiently assist you in resolving them. Therefore, if you find yourself overwhelmed with the complexities of PhD proposal writing, consider seeking help from reputable professionals. With proper assistance, you can confidently present a compelling PhD proposal that meets the highest standards and achieves the desired result.