latex writing thesis

because LaTeX matters

Writing a thesis in latex.

Writing a thesis is a time-intensive endeavor. Fortunately, using LaTeX, you can focus on the content rather than the formatting of your thesis. The following article summarizes the most important aspects of writing a thesis in LaTeX, providing you with a document skeleton (at the end) and lots of additional tips and tricks.

Document class

The first choice in most cases will be the report document class:

See here for a complete list of options. Personally, I use draft a lot. It replaces figures with a box of the size of the figure. It saves you time generating the document. Furthermore, it will highlight justification and hyphenation errors ( Overfull \hbox ).

Check with your college or university. They may have an official or unofficial template/class-file to be used for writing a thesis.

Again, follow the instructions of your institution if there are any. Otherwise, LaTeX provides a few basic command for the creation of a title page.

Use \today as \date argument to automatically generate the current date. Leave it empty in case you don’t want the date to be printed. As shown in the example, the author command can be extended to print several lines.

For a more sophisticated title page, the titlespages package has a nice collection of pre-formatted front pages. For different affiliations use the authblk package, see here for some examples.

Contents (toc/lof/lot)

Nothing special here.

The tocloft package offers great flexibility in formatting contents. See here for a selection of possibilities.

Often, the page numbers are changed to roman for this introductory part of the document and only later, for the actual content, arabic page numbering is used. This can be done by placing the following commands before and after the contents commands respectively.

LaTeX provides the abstract environment which will print “Abstract” centered as a title.

The actual content

The most important and extensive part is the content. I strongly suggest to split up every chapter into an individual file and load them in the main tex-file.

In thesis.tex:

In chapter1.tex:

This way, you can typeset single chapters or parts of the whole thesis only, by commenting out what you want to exclude. Remember, the document can only be generated from the main file (thesis.tex), since the individual chapters are missing a proper LaTeX document structure.

See here for a discussion on whether to use \input or \include .

Bibliography

The most convenient way is to use a bib-tex file that contains all your references. You can download bibtex items for articles, books, etc. from Google scholar or often directly from the journal websites.

Two packages are commonly used to personalize bibliographies, the newer biblatex and the natbib package, which has been around for many years. These packages offer great flexibility in customizing the look of a bibliography, depending on the preference in the field or the author.

Other commonly used packages

• graphicx : Indispensable when working with figures/graphs.
• subfig : Controlling arrangement of several figures (e.g. 2×2 matrix)
• minitoc : Adds mini table of contents to every chapter
• nomencl : Generate and format a nomenclature
• listings : Source code printer for LaTeX
• babel : Multilingual package for standard document classes
• fancyhdr : Controlling header and footer
• hyperref : Hypertext links for LaTeX
• And many more

Minimal example code

I’m aware that this short post on writing a thesis only covers the very basics of a vast topic. However, it will help you getting started and focussing on the content of your thesis rather than the formatting of the document.

Share this:

16 comments.

8. June 2012 at 7:09

I would rather recommend a documentclass like memoir or scrreprt (from KOMA-Script), since they are much more flexible than report.

8. June 2012 at 8:12

I agree, my experience with them is limited though. Thanks for the addendum. Here is the documentation: memoir , scrreprt (KOMA script)

8. June 2012 at 8:02

Nice post Tom. I’m actually writing a two-part (or three) on Writing the PhD thesis: the tools . Feel free to comment, I hope to update it as I write my thesis, so any suggestions are welcome.

8. June 2012 at 8:05

Thanks for the link. I just saw your post and thought I should really check out git sometimes :-). Best, Tom.

8. June 2012 at 8:10

Yes, git is awesome. It can be a bit overwhelming with all the options and commands, but if you’re just working alone, and probably on several machines, then you can do everything effortlessly with few commands.

11. June 2012 at 2:15

That’s what has kept me so far. But I’ll definitely give it a try. Thanks!

8. June 2012 at 8:08

What a great overview. Thank you, this will come handy… when I finally get myself to start writing that thesis 🙂

8. June 2012 at 14:12

Thanks and good luck with your thesis! Tom.

9. June 2012 at 4:08

Hi, I can recommend two important packages: lineno.sty to insert linenumbers (really helpful in the debugging phase) and todonotes (allows you to insert todo-notes for things you still have to do.)

11. June 2012 at 0:48

Thanks Uwe! I wrote an article on both, lineno and todonotes . Here is the documentation: lineno and todonotes for more details.

12. June 2012 at 15:51

Thanks for the post, i’m currently writing my master thesis 🙂

A small note: it seems that subfig is deprecated for the subcaption package: https://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions#Subfloats

12. June 2012 at 16:05

Hey, thanks for the tip. Too bad they don’t say anything in the documentation apart from the fact that the packages are not compatible.

1. August 2012 at 21:11

good thesis template can be also found here (free): http://enjobs.org/index.php/downloads2

including living headers, empty pages, two-sided with front and main matter as well as a complete structure

2. August 2012 at 11:03

Thanks for the link to the thesis template!

15. November 2012 at 22:21

Hi Tom, I’m writing a report on spanish in LaTex, using emacs, auctex, aspell (~170pags. ~70 files included by now) and this blog is my savior every time because I’m quite new with all these.

The question: Is there anyway (other than \- in every occurrence) to define the correct hyphenation for accented words (non english characters like é)? I have three o four accented words, about the subject of my report, that occur near 100 times each, across several files, and the \hyphenation{} command can’t handle these.

20. November 2012 at 3:47

I was wondering what packages you load in your preamble. For a better hyphenation (and easier typing), you should use these packages:

See here for more details.

If this doesn’t help, please provide a minimal working example to illustrate the problem.

Thanks, Tom.

Leave a Reply Cancel reply

Overleaf for Scholarly Writing & Publication: LaTeX Theses and Dissertations

• Reference Managers and Overleaf
• Adding Graphs, Tables, and Images
• Using Templates on Overleaf
• LaTeX Theses and Dissertations

LaTeX Theses and Dissertatons

Tips and tools for writing your LaTeX thesis or dissertation in  Overleaf, including templates, managing references , and getting started guides.

Managing References

BibTeX  is a file format used for lists of references for  LaTeX  documents. Many citation management tools support the ability to export and import lists of references in .bib format. Some reference management tools can generate  BibTeX  files of your library or folders for use in your  LaTeX  documents.

LaTeX on Wikibooks   has a  Bibliography Management  page.

Find list of BibTeX styles available on Overleaf   here

View a video tutorial on how to include a bibliography using BibTeX  here

Collaborate with Overleaf

Collaboration tools

Every project you create has a secret link. Just send it to your co-authors, and they can review, comment and edit. Overleaf synchronizes changes from all authors, so everyone always has the latest version. More advanced tools include protected projects and integration with Git.

Collaborate online and offline with Overleaf and Git

Protected projects with Overleaf Pro

Getting Started with Your Thesis or Dissertation

How to get started writing your thesis in LaTeX

Writing a thesis or dissertation in LaTeX can be challenging, but the end result is well worth it - nothing looks as good as a LaTeX-produced pdf, and for large documents it's a lot easier than fighting with formatting and cross-referencing in MS Word. Review this video from Overleaf to help you get started writing your thesis in LaTeX, using a standard thesis template from the  Overleaf Gallery .

You can  upload your own thesis template to the Overleaf Gallery   if your university provides a set of LaTeX template files or you may find your university's thesis template already in the Overleaf Gallery.

This video assumes you've used LaTeX before and are familiar with the standard commands (see our other  tutorial videos   if not), and focuses on how to work with a large project split over multiple files.

How to Write your Thesis/Dissertation in LaTeX: A Five-Part Guide

Five-Part LaTeX Thesis/Dissertation  Writing Guide

Part 1: Basic Structure   corresponding  video

Part 2: Page Layout   corresponding  video

Part 3: Figures, Subfigures and Tables   corresponding  video

Part 4: Bibliographies with Biblatex  corresponding  video

Part 5: Customizing Your Title Page and Abstract   corresponding  video

Link Your ORCID

Link yo ur  ORCiD  account  to your  Overleaf account  via the  ORCID @ CMU Portal

Open Knowledge Librarian

• << Previous: Using Templates on Overleaf
• Last Updated: Oct 4, 2023 9:31 AM
• URL: https://guides.library.cmu.edu/overleaf

Overleaf for LaTeX Theses & Dissertations: Home

• Using Templates on Overleaf
• Reference Managers and Overleaf
• Adding Tables, Images, and Graphs

Tips and tools for writing your LaTeX thesis or dissertation in Overleaf, including templates, managing references , and getting started guides.

Managing References

BibTeX is a file format used for lists of references for LaTeX documents. Many citation management tools support the ability to export and import lists of references in .bib format. Some reference management tools can generate BibTeX files of your library or folders for use in your LaTeX documents.

LaTeX on Wikibooks has a Bibliography Management page.

Find list of BibTeX styles available on Overleaf here

View a video tutorial on how to include a bibliography using BibTeX  here

Collaborate with Overleaf

Collaboration tools

• One version of your project accessible to collaborators via a shared link or email invitation
• Easily select the level of access for collaborators (view, edit, or owner access)
• Real-time commenting speeds up the review process
• Tracked changes and full history view help to see contributions from collaborators
• Labels help to organize and compare different versions
• Chat in real time with collaborators right within the project

How to get started writing your thesis in LaTeX

Writing a thesis or dissertation in LaTeX can be challenging, but the end result is well worth it - nothing looks as good as a LaTeX-produced pdf, and for large documents it's a lot easier than fighting with formatting and cross-referencing in MS Word. Review this video from Overleaf to help you get started writing your thesis in LaTeX, using a standard thesis template from the Overleaf Gallery .

You can upload your own thesis template to the Overleaf Gallery if your university provides a set of LaTeX template files or you may find your university's thesis template already in the Overleaf Gallery.

This video assumes you've used LaTeX before and are familiar with the standard commands (see our other tutorial videos  if not), and focuses on how to work with a large project split over multiple files.

Add Institutional Library contact info here.

Contact Overleaf   or email [email protected]

5-part Guide on How to Write a Thesis in LaTeX

5-part LaTeX Thesis Writing Guide

Part 1: Basic Structure corresponding  video

Part 2: Page Layout corresponding  video

Part 3: Figures, Subfigures and Tables   corresponding video

Part 4: Bibliographies with Biblatex corresponding video

Part 5: Customizing Your Title Page and Abstract corresponding video

ShareLaTeX Joins Overleaf!

Read more about Overleaf and ShareLaTeX joining forces here

Link your ORCiD ID

Link your ORCiD account to your Overleaf account.

See Overleaf news   on  our blog.

• Next: Using Templates on Overleaf >>
• Last Updated: May 18, 2021 1:57 PM
• URL: https://overleaf.libguides.com/Thesis

home | writing | TIL | now | about

Writing a thesis in latex.

This article is a guide to constructing a decent parent file for a thesis or dissertation compiled in Latex. The specific details implemented here, and included in the example files, are those set out by the guidelines for submission to the University of Nottingham, but can be easily amended to suit any sensible requirements.

Considerable attention has been paid to presenting the final document as a PDF file, which keeps the file size manageable (compared to postscript) and allows groovy add-ons such as hyperlinks and back-referencing. However, several hacks are required to attain good functionality from your PDF file and these can give the latex code a mysterious (and messy) appearance in places. While I highly recommend the inclusion of the PDF-related commands, they are not strictly necessary and can be ignored especially if you are new to Latex.

Note for Windows users

The code outlined below was designed and implemented on the unix system at Nottingham. For those of you unfortunate enough to be running a Windows box, a number of problems may arise when using the below code:

First off, not all the packages used will be present and will need to be installed. Probably the easiest way to do this is to google the package name with the extension .sty and save this file in the C:\VTEX\l2e\\ directory of your machine. Note that for the natbib package, you will also need to download the relevant .bst file, which in this case is unsrtnat.bst .

Also, many of the packages that are installed locally may need updating. For instance, the computers I have tested on both have old versions of the geometry and caption packages, which cause Latex to return errors. To resolve these problems, either download the latest versions, or remove the includefoot option from the geometry package and set the bottom margin to 1.4in.

Also, the code for compiling to PDF does not work so well in Windows, and so it is recommended that Windows users use the template without PDF code.

Requirements

The guidelines for theses to be submitted to the University of Nottingham specify that:

• the document should be presented on single-sided a4 paper and typeset in a double-spaced size 10-12 font;
• the left-hand margin should be at least 1.5 inches (4cm) to allow for binding;
• the other three margins should be at least 1 inch (2.5cm).

Other settings such as the way chapter headings are formatted, and whether headers are included, are not specified and are up to the user. In this case, we’ll install headers and tinker with the chapter formatting.

Template files

Here are the template files which this page explains:

• thesis_without_pdfcode.tex
• thesis_with_pdfcode.tex

The appearance of both these files on the printed page will be identical; however after compilation into PDF (see the section below) and opening in Adobe Acrobat (or a similar PDF reader), the advantages that come with the PDF format will be apparent.

• thesis_without_pdfcode.pdf
• thesis_with_pdfcode.pdf

The rest of this page is devoted to explaining the code in these files.

Document structure

The document begins in a standard and entirely self-explanatory manner.

Preamble: essential packages

Next, the essential packages are loaded:

where the geometry package has been loaded to allow the margins to be set in a neat and consistent way. The non-obvious option includefoot ensures that the footer (which only contains the pagenumber) is included in the page and is thus 1 inch above the bottom of the page. Note that this option is only available in recent versions of the package: if you’re using an old version and can’t/won’t upgrade, then remove the offending option and extend the bottom margin to 1.4in. headheight=13.6pt is included due to to ensure compatibility with the fancyhdr package (and is not required if you don’t use the fancyhdr package). Also quite essential is the natbib package:

where the various options ensure that references appear in the document as:

…boiled dog can do maths claims experimenter [10,12,15-18].

Alternative referencing styles are easily implemented, see the natbib help file for more details. In fact, to use the natbib package, you’ll have to read at least a few lines of the help file so you understand the difference between \citet and \citep , and I insist you do that now.

Preamble: custom captions (optional)

We now set the figure captions to be elegant and dignified:

Note that early versions of this package don’t support the margin= and tableposition= options; in this case, these trimmings will have to be ignored.

Preamble: custom fonts (optional)

You can also choose an alternative font for both the text and the mathematical characters. This can be achieved by:

Aside from mathpazo , there are several other fonts available, such as chancery , palatino and times (all loaded in the same way).

Preamble: fancy headers (optional)

Feeling a little devil-may-care? If so, you’ll probably want to install some elegant headers along each page. This is easily achieved through the fancyhdr package:

The final complicated-looking three lines simply ensure that the headings for appendices are formatted correctly. (Without these lines, what should read “Appendix A” is set as “Chapter A”.)

Preamble: customised chapter/section headings (optional)

We now make use of several customisation options that are bundled with the sectsty package.

These alter the appearance of the first page of each chapter to have a centred title, with the word “chapter” set in small capitals immediately above. Feel free to employ your own individual and highly refined tastes here in choosing your own chapter/section settings.

Preamble: pdf options (optional)

If you want to publish your thesis on the internet, or even just to email it to someone, then you’ll want to store it in the ubiquitous PDF format. Doing so offers some neat facilities, such as hyperlinking, which are implemented by the hyperref package:

There are various other options you can pass to your favourite PDF reader via the \hypersetup command, such as pdftitle , pdfauthor and pdfsubject ; however, they’re not really essential. Note that the hyperlink colours have all been set to black for consistent printing. Should you want to distribute your thesis over the web, then it would be advisable to set these colours to red or something similarly vibrant and exciting.

Things get a little messy now as a hack is required to ensure the hyperlinks actually jump to the right place.

No need to worry about this code, let’s just move straight on.

Preamble: page layout

We now set various parameters to alter the general page layout:

The first two of these commands alter the paragraph formatting so that new paragraphs are not indented but separated from the previous one by a small amount of whitespace; the third sets the line spacing. The sharp-eyed among you will notice the discrepancy between our chosen line-spacing and that dictated by the university guidelines. However, no matter how poor your eyesight is, you’ll quickly appreciate that true double line-spacing (set with \renewcommand(\baselinestretch}{2} ) looks rubbish. In addition, Nottingham University are perfectly happy to accept theses set with the above line-spacing, which is more pleasing to the eye.

Some final settings:

Set which chapters to include when Latex is next run. The advantage of this method is that all your cross-references are remembered and Latex does not spit out loads of warnings.

Main matter

We now begin the document in earnest and define a suitable title:

followed by a dedication:

We now construct an abstract:

some acknowledgements:

and a contents page:

Now, we alter the pagenumbering to arabic and point to the relevant chapter files:

All your chapter files should be included here; to save time when editing, use the \includeonly command to specify which chapters to compile.

Finally, we make sure there is a link to the references section in the table of contents and reference the correct bibiography file (which in this case is called bibliography.bib ).

And there we have it: a complete thesis parent file that not only looks good on the printed page, but is fully functional and hyperlinked in PDF format.

Compiling to PDF

Whether you’ve included all the red PDF commands or not, you can convert your TEX file to PDF by running (in unix):

The additional argument to ps2pdf is required as the default paper size is US Letter. Note that you will probably need to bibtex your thesis file before running latex for the final time.

For Windows, first open a command window by going Start->Run and entering cmd . Provided MiKTeX and GhostScript are correctly installed then the necessary commands are:

The syntax for ps2pdf is slightly different in Windows compared to Unix - and note that the output pdf filename MUST be specified, else the ps file is overwritten and corrupted.

Something wrong? Suggest an improvement or add a comment (see article history ) Tagged with: latex Filed in: guides

Previous: Tutorial: the complex Ginzburg-Landau equation Next: Following log files with tail -f

Copyright © 2005-2023 David Winterbottom Content licensed under CC BY-NC-SA 4.0 .

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

Using LATEX for writing a Thesis

2007, The PracTeX Journal

"LaTeX has been successfully used for typesetting widely different document format. However, the complexity of typesetting some commonly used documents, normally acts as a deterrent for various people, who would like to use LaTeX for their work. Over the years, I have noticed that students who come to LaTeX, eager in their anticipation of using LaTeX, lose their enthusiasm, midway, and revert back to using MS Word. In this article, I have tried to described my own experiences of typesetting a doctoral thesis using widely available packages; in the hope that students can see the the ease with which LaTeX can be used for complex work."

Related Papers

Mason Porter

LaTex (which is pronounced LAY-TECK) is commonly used by scientists to write their research articles, as it is the easiest for them to include mathematical symbols, figures, tables, etc. in their work in a platform-independent manner. Increasingly many scientific journals require that submitted articles be typeset in LaTex. The purpose of this article is to provide a minimalist introduction to LaTex.

Ehibar Lopez

Lian Tze Lim

Antero Neves

Kevin McManus

Adi Narayana RGUKT

Amy Hendrickson

Fortunately, the life of a LATEX consultant can be varied and the activities diverse. In my fourteen years working with Donald Knuth’s wonderful language, I’ve spent time teaching LATEX, writing special-purpose macro packages for, among other things, database publishing, tables that continue for hundreds of pages, training slides, software documentation, and PDF production, in addition to my major activity — writing and supporting multiuser macro packages for publishing companies. The programming capabilities of the language are immense, and it has been fun exploring a tiny part of its possible applications. In this paper I’d like to share some observations, especially in the areas of designing and supporting multiuser macro packages, the use of PostScript in design, and some of the capabilities of LATEX as a generator of PDF. Preparing and Supporting Multiuser Macro Packages

Nader Center , mohammad nikafrooz

ABSTRACT: The present study aims to introduce a series of procedures toward preparing any scientific text using MS Word software. Some journals and academic centers, based on their scientific domain, have their own styles and formatting. One of the challenges that authors may encounter while preparing any research report is to apply those formatting style to their thesis document file. At first, the paper provides some information about styles and then some information about the author's needs and problems during preparing any research report text. Finally, some new procedures are presented which enable authors to satisfy all formatting styles components within document files. We called the procedures thesis preparing algorithm. This algorithm renders some technical procedures which should be followed according to their order to achieve a desired output for thesis preparing procedures. This algorithm is based on three features: familiarity with software's tools and their functions, the order of processes, and special techniques. We believe using this algorithm, authors will gain a better performance in preparing any dissertation and research reports.

Francisco A F Reinaldo

Computers and Composition

Amanda Wray

RELATED PAPERS

Sanja Skočić Mihic

International Journal of Biological and Chemical Sciences

Dieudonné DAHOUROU

Revista Monografias Ambientais

Paulo Maroti

Amir Refahi Oskouei

Informatik-Fachberichte

Volker Brandenburg

Herpetologica

Domingos Rodrigues

Cesar Albino

André Rocha Franco

Global Journal of Educational Research

Constance Dien

Kocaeli Üniversitesi Sosyal Bilimler Dergisi

Kemal Aydin

Journal of Polytechnic

European Journal of Hospital Pharmacy

Maria Martinez

Rivers State University ,Public Law Journal

Oluwatosin Omobolanle Ogwezzy

British Journal of Dermatology

Esen Özkaya

Science and Technology of Advanced Materials

Julian Rosalie

FITKES UNJANI

Bianca Angeline

International Journal of Environmental Research and Public Health

Wai Cheng Foong

Shakila Zaman

Bryant Carrillo

Tạp chí Y học Việt Nam

Thảo Nguyên

THIRD INTERNATIONAL CONFERENCE OF MATHEMATICAL SCIENCES (ICMS 2019)

Syamsul Pasaribu

Marc Perrenoud

Samsun sağlık bilimleri dergisi

Konstantine Zelator

See More Documents Like This

RELATED TOPICS

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

Frequently Asked Question List for TeX

Formatting a thesis in LaTeX

Thesis styles are usually very specific to your university, so it’s usually not profitable to ask around for a package outside your own university. Since many universities (in their eccentric way) still require double-spaced thesis text, you may also need separately to set up double spacing .

If you want to write a new thesis class of your own, a good place to start is the University of California style, but remember that it’s often difficult to produce a thesis that both looks good and conforms with the style that your univeristy demands.

FAQ ID: Q-thesis Tags:  classes

Templates — Thesis

Templates tagged Thesis

Show all Templates

Your thesis or dissertation is often the most important single piece of work you’ll produce as a student (whether it be your final year undergraduate research project or your complete Masters / PhD thesis). These templates, many provided by the university themselves as official layout guidelines, include sections for you to add all the relevant author information (your university, department, supervisor, year, etc) along with placeholder chapters for your introduction, background, method, results, conclusion / discussion, references and appendices.

Related Tags

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.