the abstract of my thesis

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

17 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 3. The Abstract
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

Writing an Abstract. The Writing Center. Clarion University, 2009; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century . Oxford, UK: Chandos Publishing, 2010;

Importance of a Good Abstract

Sometimes your professor will ask you to include an abstract, or general summary of your work, with your research paper. The abstract allows you to elaborate upon each major aspect of the paper and helps readers decide whether they want to read the rest of the paper. Therefore, enough key information [e.g., summary results, observations, trends, etc.] must be included to make the abstract useful to someone who may want to examine your work.

How do you know when you have enough information in your abstract? A simple rule-of-thumb is to imagine that you are another researcher doing a similar study. Then ask yourself: if your abstract was the only part of the paper you could access, would you be happy with the amount of information presented there? Does it tell the whole story about your study? If the answer is "no" then the abstract likely needs to be revised.

Farkas, David K. “A Scheme for Understanding and Writing Summaries.” Technical Communication 67 (August 2020): 45-60;  How to Write a Research Abstract. Office of Undergraduate Research. University of Kentucky; Staiger, David L. “What Today’s Students Need to Know about Writing Abstracts.” International Journal of Business Communication January 3 (1966): 29-33; Swales, John M. and Christine B. Feak. Abstracts and the Writing of Abstracts . Ann Arbor, MI: University of Michigan Press, 2009.

Structure and Writing Style

I.  Types of Abstracts

To begin, you need to determine which type of abstract you should include with your paper. There are four general types.

Critical Abstract A critical abstract provides, in addition to describing main findings and information, a judgment or comment about the study’s validity, reliability, or completeness. The researcher evaluates the paper and often compares it with other works on the same subject. Critical abstracts are generally 400-500 words in length due to the additional interpretive commentary. These types of abstracts are used infrequently.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarized. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less. Informative Abstract The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Highlight Abstract A highlight abstract is specifically written to attract the reader’s attention to the study. No pretense is made of there being either a balanced or complete picture of the paper and, in fact, incomplete and leading remarks may be used to spark the reader’s interest. In that a highlight abstract cannot stand independent of its associated article, it is not a true abstract and, therefore, rarely used in academic writing.

II.  Writing Style

Use the active voice when possible , but note that much of your abstract may require passive sentence constructions. Regardless, write your abstract using concise, but complete, sentences. Get to the point quickly and always use the past tense because you are reporting on a study that has been completed.

Abstracts should be formatted as a single paragraph in a block format and with no paragraph indentations. In most cases, the abstract page immediately follows the title page. Do not number the page. Rules set forth in writing manual vary but, in general, you should center the word "Abstract" at the top of the page with double spacing between the heading and the abstract. The final sentences of an abstract concisely summarize your study’s conclusions, implications, or applications to practice and, if appropriate, can be followed by a statement about the need for additional research revealed from the findings.

Composing Your Abstract

Although it is the first section of your paper, the abstract should be written last since it will summarize the contents of your entire paper. A good strategy to begin composing your abstract is to take whole sentences or key phrases from each section of the paper and put them in a sequence that summarizes the contents. Then revise or add connecting phrases or words to make the narrative flow clearly and smoothly. Note that statistical findings should be reported parenthetically [i.e., written in parentheses].

Before handing in your final paper, check to make sure that the information in the abstract completely agrees with what you have written in the paper. Think of the abstract as a sequential set of complete sentences describing the most crucial information using the fewest necessary words. The abstract SHOULD NOT contain:

• A catchy introductory phrase, provocative quote, or other device to grab the reader's attention,
• Lengthy background or contextual information,
• Redundant phrases, unnecessary adverbs and adjectives, and repetitive information;
• Acronyms or abbreviations,
• References to other literature [say something like, "current research shows that..." or "studies have indicated..."],
• Using ellipticals [i.e., ending with "..."] or incomplete sentences,
• Jargon or terms that may be confusing to the reader,
• Citations to other works, and
• Any sort of image, illustration, figure, or table, or references to them.

Abstract. Writing Center. University of Kansas; Abstract. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Abstracts. The Writing Center. University of North Carolina; Borko, Harold and Seymour Chatman. "Criteria for Acceptable Abstracts: A Survey of Abstracters' Instructions." American Documentation 14 (April 1963): 149-160; Abstracts. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Hartley, James and Lucy Betts. "Common Weaknesses in Traditional Abstracts in the Social Sciences." Journal of the American Society for Information Science and Technology 60 (October 2009): 2010-2018; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century. Oxford, UK: Chandos Publishing, 2010; Procter, Margaret. The Abstract. University College Writing Centre. University of Toronto; Riordan, Laura. “Mastering the Art of Abstracts.” The Journal of the American Osteopathic Association 115 (January 2015 ): 41-47; Writing Report Abstracts. The Writing Lab and The OWL. Purdue University; Writing Abstracts. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-First Century . Oxford, UK: 2010; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Writing Tip

Never Cite Just the Abstract!

Citing to just a journal article's abstract does not confirm for the reader that you have conducted a thorough or reliable review of the literature. If the full-text is not available, go to the USC Libraries main page and enter the title of the article [NOT the title of the journal]. If the Libraries have a subscription to the journal, the article should appear with a link to the full-text or to the journal publisher page where you can get the article. If the article does not appear, try searching Google Scholar using the link on the USC Libraries main page. If you still can't find the article after doing this, contact a librarian or you can request it from our free i nterlibrary loan and document delivery service .

• << Previous: Research Process Video Series
• Next: Executive Summary >>
• Last Updated: Apr 22, 2024 9:12 AM
• URL: https://libguides.usc.edu/writingguide

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 22 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

How to Write an Abstract

An abstract of a work, usually of an essay, is a concise summary of its main points. It is meant to concentrate the argument of a work, presenting it as clearly as possible.

The abstract often appears after the title and before the main body of an essay. If you are writing an abstract as part of an assignment, you should check with your instructor about where to place it.

Here are a few guidelines to follow when composing an abstract:

• In general, avoid too much copying and pasting directly from your essay, especially from the first paragraph. An abstract is often presented directly before an essay, and it will often be the first thing readers consult after your title. You wouldn’t repeat your ideas verbatim in the body of your essay, so why would you do that in an abstract? Consider the abstract part of the work itself. 
• Start off strong. An abstract should be a mini essay, so it should begin with a clear statement of your argument. This should be the first sentence or two.
• Abstracts vary in length. But a good rule is to aim for five to seven sentences. The bulk of the abstract will review the evidence for your claim and summarize your findings.
• Avoid complicated syntax. Long sentences and intricate phrasing have their place in essays, but the abstract should be concise. It is not the place for ambitious grammar.
• The last sentence or two should point to any conclusions reached and the direction future research might take. Like the first sentence, the last should be provocative and direct. Leave your readers wanting to read your essay.

In what follows, the authors have written an effective abstract that adheres to the basic principles above:

Literary critics have long imagined that T. S. Eliot’s The Sacred Wood (1920) shaped the canon and methods of countless twentieth-century classrooms. This essay turns instead to the classroom that made The Sacred Wood : the Modern English Literature extension school tutorial that Eliot taught to working-class adults between 1916 and 1919. Contextualizing Eliot’s tutorial within the extension school movement shows how the ethos and practices of the Workers’ Educational Association shaped his teaching. Over the course of three years, Eliot and his students reimagined canonical literature as writing by working poets for working people—a model of literary history that fully informed his canon reformation in The Sacred Wood . This example demonstrates how attention to teaching changes the history of English literary study. It further reveals how all kinds of institutions, not just elite universities, have shaped the discipline’s methods and canons. (Buurma and Heffernan)

This abstract uses the first two sentences to establish the essay’s place in its field of study and to suggest how it intervenes in existing scholarship. The syntax is direct and simple. The third sentence begins to outline how the authors will support their argument. They aim to demonstrate the relevance of Eliot’s teaching to his ideas about literature, and so they move next to discuss some of the details of that teaching. Finally, the abstract concludes by telling us about the consequences of this argument. The conclusion both points to new directions for research and tells us why we should read the essay. 

Buurma, Rachel Sagner, and Laura Heffernan. Abstract of “The Classroom in the Canon: T. S. Eliot’s Modern English Literature Extension Course for Working People and  The Sacred Wood. ”  PMLA , vol. 133, no. 2, Mar. 2018, p. 463.

Estate Best 18 July 2021 AT 05:07 AM

Please how will I write an abstract for my own poem collections?

Your e-mail address will not be published

Marc Simoes 01 April 2022 AT 04:04 PM

I am teaching students how to format and write an abstract, but I find no precise guidelines in the MLA Handbook. Should the first word of the abstract body text begin with the word "Abstract" followed by a period or colon and then the abstract content? Should the word "Abstract" be underlined? Over the years, I was taught both of these ways by different instructors, but I haven't found any definitive instructions, and now my students are asking me the correct format. Please help! Thank you!

Joseph Wallace 12 April 2022 AT 01:04 PM

Although publishers like the MLA will use their own house style guidelines for abstracts in published material, there is no one correct way for students to format their abstracts. Instructors should decide what works best for their classes and assignments.

Lorraine Belo 17 April 2022 AT 10:04 PM

Can you write a brief abstract about your MLA writing

Subrata Biswas 13 July 2023 AT 10:07 AM

Generally, the abstract is written in Italics. Is there any rule as such?

Joseph Wallace 31 July 2023 AT 10:07 AM

Thanks for your question. There is no rule saying that abstracts need to be written in italics. Some publications use italics for abstracts and some do not.

Dhan 07 January 2024 AT 12:01 PM

Should I write key words at the end of the abstract of Phd dissertation?

Join the Conversation

We invite you to comment on this post and exchange ideas with other site visitors. Comments are moderated and subject to terms of service.

If you have a question for the MLA's editors, submit it to Ask the MLA!

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 408 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

Writers' Center

Eastern Washington University

Writing an Abstract

Overview of abstracts, steps for writing an abstract, let the abstract guide your paper.

[ Back to resource home ]

[email protected] 509.359.2779

Cheney Campus   JFK Library Learning Commons

Spokane Campus Catalyst Building C451 and C452

Stay Connected! Instagram  Facebook

Access The EWU Student Research and Creative Works Symposium website

Abstract handout from the University of North Carolina at Chapel Hill

Sample abstracts from the University of Wisconsin

An abstract is a brief summary of a research paper. When you search for published articles in the library database, you'll first see an abstract of the article, which can give you a good idea whether the article will be useful for your research. In addition, if you would like to present a research project at a conference, you may be required to submit an abstract in order to be considered.

• Keep it short. Abstracts are typically 100- 250 words long.
• Include context, background, and a thesis statement.
• A well-written abstract can act as a guide, or outline, for the rest of your paper.

Keep in mind that writing is a recursive process, meaning that sometimes steps aren’t always followed in order. You may find yourself going back to a previous step, or jumping ahead. Work through the steps in the order that suits your writing process—but each of these steps should occur at some point in the process.

• Read the guidelines

Whether you are writing your abstract for a course, for a conference, or for a professional publication it is important to familiarize yourself with the specific requirements of the project. Go to the organization’s website and search for submission guidelines, then follow them exactly.

• Look for examples

Most conferences provide archives of presentations and programs. These archives contain abstracts from previous presenters.  These abstracts can work to guide your own. Here is a sample abstract from EWU’s Student Research and Creative Works Symposium, 2012:

An Ecologically Based Invasive Plant Management Approach to Prairie Restoration on Mima Mounds at Turnbull National Wildlife Refuge Kristin Anicito Rebecca Brown, Biology

Invasive annual grasses (IAG) are a major threat to biodiversity in western United States. IAG replace native plants and increase fire frequency thus altering ecosystem structure and function. Biological soil crust (BSC) disturbance, which leads to a loss of fixed nitrogen, likely promotes IAG invasion. Little is known about BSC disturbance effects in semi-arid systems as most studies are from drier regions. My research goal is to find an effective control for IAG that will not harm native plant growth or BSC health by testing the following questions on a Mima mound prairie at Turnbull National Wildlife Refuge: 1) Will BSC disturbance increase vascular plant growth? 2) Which controls (herbicide, native seed, rhizobacteria, and sucrose) reduce IAG while maintaining native species over 1 and 3 year time scales? 3) Does active pocket gopher disturbance increase IAG? My results could improve IAG management in the western United States.

• Compose your thesis statement

Your thesis statement or topic may change as you write, so you may need to revise your thesis statement to reflect exactly what you have discussed in your paper. Some tips:

• Write a thesis statement in one complete sentence.
• Be specific.
• Leave the research open-ended (you don’t have to provide a conclusion in your abstract).  
• Choose a statement rather than a question.
• Avoid announcing your thesis. Your sentence can be embedded within the abstract. From the example above:
• Provide background and context

Remember that your abstract does not prove your thesis statement; your paper does. Keep only the most relevant information in your abstract. Be able to succinctly answer the following questions:

• What kind of problem is it?
• How did you address this problem?
• How does your information fit into the larger conversation on this topic?

Some writers complete their paper before writing an abstract. However, some scholars write the abstract first, submit it to a conference, and then write the paper. If you choose to write your abstract first, then you can let the abstract guide your draft.

• Find the main points

Look through the body of your abstract and identify your main point and your supporting points.

• Craft an Outline

Outlines help to organize your thoughts and will also make you aware of your blind spots. If there are gaps in your research or reasoning, then fill the gaps with more research or re-organize the information logically.

Write your main point (your thesis) at the top of the page. Using bullets, list your main points and prepare to incorporate research to back them up.

• Thesis:  My research goal is to find an effective control for IAG that will not harm native plant growth or BSC health by testing the following questions on a Mima mound prairie at Turnbull National Wildlife Refuge.
• Provide answer with researched evidence
• DISCUSS WHICH SOLUTION IS BEST
• IAG management can be improved if the following is done….
• Last Updated: Jul 21, 2021 3:04 PM
• URL: https://research.ewu.edu/writers_center_writing_abstract

Welcome to Student Learning Te Taiako

Writing an abstract.

Abstracts are usually required for a thesis or publication. Abstracts give the reader an overall idea of your research and the ideas you will be exploring.

Since your abstract will be the first thing your readers see, take time with it!

It can be intimidating to condense a large thesis into a concise abstract but knowing the structure of an abstract can help you to approach this part of your thesis confidently.

The structure of an abstract

The overall structure of an abstract usually includes the following sections:

The order and flow of these sections may change depending on your discipline, but the structure will usually always include these main areas.

• Your abstract should be able to stand alone without someone needing to read your paper to understand it
• Try to have only 1-3 sentences for each section
• Use relevant key words in your abstract that might lead search engines to your paper
• Abstracts usually don’t need to have references cited within the text (though there are some exceptions)
• Make your writing clear and succinct

Try Writing your own Abstract

Use the interactive tool below to begin drafting your abstract. At the end of the activity, you will be able to download a draft of your abstract. You can then edit to make sure the sentences link together and flow.

Additional resources

For more abstract writing resources check out:

• pdf 1.2MB Writing an abstract